Automatic stats collection in the database

Hi all

As we know from oracle database collection automatically from 10 g from the statistics. I'm looking for documentation oracle who described on condition/settings which oracle decides what statistical table to gather and when.

http://docs.Oracle.com/CD/E11882_01/server.112/e41573/stats.htm#PFGRF94713

Oracle would have to check the percentage vitiated the table. It is set to 10% by default. This is so the criteria used to select the table as a candidate for automatic stats collection.

HTH

Aman...

Tags: Database

Similar Questions

Is sort of report columns state stored in the database?
Hello

My http://apex.oracle.com/pls/otn/f?p=62577:1 request URL
Suppose that I open it in firefox, so that the report by "The Pavilion student" and open a new session in IE the report is sorted by student flag is shown. I have no "order by" in the report query, but the report attributes only the sort sequence 'Person Id' has a value of 1.

I guess that the report should appear even when it is the first. A user of sorting of the report should not effect when it is run by another user. I have the clear browser cache before the race page.

Kishore
Hi Kishore,

Yes, the sort order is stored as the user preferences - see: need to do the SORTING of columns only when I click on the column header

Because your test application does not require the user to login, all users as being actually given to the same user, PUBLIC_USER, so all will see the same preferences. Your current application require authentication?

Andy

Temporarily disable sending on the eve of the database of newspapers
All,

I have 3 node RAC primary database and RAC 3 node backup database.
Oracle version is 10.2.0.4.0 on Sun Solaris.
We use pending through LGWR log shipping, database and auto is in maximum performance mode.

We plan to run critical processes of a lot which is strongly oriented as CPU consumption of resources and memory consumption. It runs for 10 hours with set of stored procedures.

To provide resources to this process of batch processing, front-end applications will be stop (completely time to users).

Question 1_

It is recommended to stop log shipping on the eve of the database during batch processing. Once the batch is finished, activate standby mode.

I'm new to this environment before. I went through the documentation and I've identified the steps below to perform the above task.

"" 1) before the batch, run the following command in primary education - alter system set log_archive_dest_state_2 = reporter scope = the two sid = ' * '; This will temporarily stop log shipping on the eve of the database.
(2) run the lots for 10 hours. Depending on the size of FRA available are the rates of production of the journal, we have enough space to resist the newspapers for 3 days.
"" (3) when the batch is finished, I will exercise the command at primary level - below alter system set log_archive_dest_state_2 = enable scope = both sid = ' * ';

After step 3, I guess that all arrears of logs in the meantime to primaries will be transferred automatically at startup of the database and applied.

My above assumption is correct and did, I missed milestones.

Question 2_

Before the batch, we'll take hot full backup with RMAN.
If something goes wrong with a batch, we plan to restore and reset the logs. Here, no recovery is necessary. This approach is very good. any other better solution.

My questions can be very basic, since I don't have custody of data set up in sleep mode, I'm not able to test it. I need your help when reviewing above steps and suggestions / corrections.
Hey Buddy,

Question 1

It is recommended to stop log shipping on the eve of the database during batch processing. Once the batch > process is finished, activate it in standby mode.

I'm new to this environment before. I went through the documentation and I've identified the steps below to perform the above task.

"" 1) before the batch, run the following command in primary education - alter system set log_archive_dest_state_2 = reporter > scope = the two sid = ' * '; This will temporarily stop log shipping on the eve of the database.
(2) run the lots for 10 hours. Depending on the size of FRA available are the rates of production of the journal, we have enough space > to withstand the newspapers for 3 days.
"" (3) when the batch is finished, I will exercise the command at primary level - below alter system set log_archive_dest_state_2 = enable scope = both sid = ' * ';

After step 3, I guess that all arrears of logs in the meantime to primaries will be transferred automatically at startup of the database and applied.

My above assumption is correct and did, I missed milestones.

I guess it's safer if you also include a step 1.1, which continues the redo apply processes. "alter database recover managed standby database cancel;

If all archive logs are on the primary server, as soon as you raise the environment (activate the log_archive_dest and start posting), your stand will ask for the records it needs.

After a long period without applying redo, you also have the option to use a backup incremental rman to 'transfer' the day before [RMAN incremental backup to roll forward using a Physical Standby Database | http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#CIHIAADC]

Question 2

Before the batch, we'll take hot full backup with RMAN.
If something goes wrong with a batch, we plan to restore and reset the logs. Here, no recovery is necessary. > This approach very well. any other better solution.

My questions can be very basic, since I don't have custody of data set up in sleep mode, I'm not able to test it. I need your help when reviewing above steps and suggestions / corrections.

If I were you, in the event of an error, I'd just use database flashback instead of open primary with resetlogs. Have a look here [Using Flashback Database after the issuance of a statement Open of Resetlogs | http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#i1049616] to get an idea about this process and also read notes metalink 728374.1 and 824213.1.

It will be useful,
Cerreia

Recover the database Losted
I have a new adventure like Oracle Database Administrator (of course as a beginner): I assume that this database has crashed during the backup. Now, I can't launch database, I can't retrieve the database, I can't do anything. EM said "the State of the database is currently unavailable. It is possible Traore, the database is in State of Mount or nomount. Click 'Start' to get the current state and open the database. If the database cannot be opened, click "Perform the valuation" to run a proper recovery operation. "When I try to"Start", according to the information of identification and"work in progress", he returned to the first window. I tried to perform recovery, but the result is same.

Can someone describe me procedure how to recover the database step by step? I need to recover the data from the tables and if it is possible, the tables.

I have the database Oracle 10.1.0 on Windows 2003 server.

Thanks in advance!
Miroslav197 wrote:
Yes, I did: alter system set db_recovery_file_dest_size = 10G-force and commissioning.

Now, he says: ORACLE instance started. Complete system...; Mounted database. ; Open database.

Looks all right. Do I need something more to do before opening EM?

Yes.
Actually answer your question. Except that pst responded and post correct/good

BEA-000362 < server failed. At least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If the database is selected, then DataSourc

My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none. I can't even to the Server Admin page.
Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory
Help, please! Thank you!
Joe
****************************************************************************
# < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-int├⌐grit├⌐ for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. >
# < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content:
C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >
# < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool.
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version:
WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer.
Listening address: 7001
Address public n/a
True active http
Tunneling Enabled false
Outgoing Enabled false
Admin traffic enabled true fake license to ResolveDNSName >
# < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer.
Weight of the channel 50
Accept the rear 300
Timeout 5000ms
Message Max Size 10000000
Timeout message 60 years
Timeout of 65
Tunneling Timeout 40 s
Tunneling Ping 45 s >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. >
# < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows:
awt. Toolkit = sun.awt.windows.WToolkit
leader. Encoding = Cp1252
leader. Encoding.pkg = sun.io
leader. Separator =.
Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
Java.awt.PrinterJob = sun.awt.windows.WPrinterJob
Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar
Java.class.version = 51.0
Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext
Java.Home = C:\JDK17~1.0_6\jre
Java.IO.TMPDIR =
Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;.
Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory
Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
Java.Runtime.Name = Java (TM) SE Runtime Environment
Java.Runtime.version = 1.7.0_60 - b19
Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
Java.Specification.Name = Java Platform API Specification
Java.Specification.Vendor = Oracle Corporation
Java.Specification.version = 1.7
Java.Vendor = Oracle Corporation
Java.vendor.URL = http://Java.Oracle.com/
Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/
Java.version = 1.7.0_60
Java.VM.info = mixed mode
Java.VM.Name = VM Server Java hotspot 64-Bit
Java.VM.Specification.Name = specification of Machine Java virtual
Java.VM.Specification.Vendor = Oracle Corporation
Java.VM.Specification.version = 1.7
Java.VM.Vendor = Oracle Corporation
Java.VM.version = 24, 60 - b09
javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
OS. Arch = amd64
OS. Name = Windows 7
OS.version = 6.1
Path.Separator =;
Sun.Arch.Data.Model = 64
Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes
Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin
Sun.CPU.endian = little
Sun.CPU.isalist = amd64
Sun.Desktop = windows
Sun.IO.Unicode.Encoding = UnicodeLittle
Sun.java.Command = weblogic. Server
Sun.java.Launcher = SUN_STANDARD
Sun.JNU.Encoding = Cp1252
Sun.Management.Compiler = HotSpot 64 bits compilers Tiered
Sun.OS.patch.Level = Service Pack 1
User.country = en
User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain
User.Home =
User.language = en
User.Name =
User.TimeZone =
VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap
WebLogic. Name = AdminServer
WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " >
# < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. >
# < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. >
# < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions.
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. >

It may sound crazy that I am answering my own post. As he complains about MigrationBasis. I tried to go to the config.xml file and changed

Cluster-0

unicast

database

TO

Cluster-0

unicast

consensus

And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration.

Joe

What update statement is sent to the database?

In several pages, I use the Apex line (DML) 4.2 automatic treatment processes. If I do an update of a record, which are columns in the update statement? All columns, only the displayed, only the columns changed, also the PK column?
As far as I can see now all the columns that are displayed are updated, also the PK, which is display only.
I ask this, because when the PK is updated (not changed is screen only) all tables in my 75 cases, where this PK is used as FK, will get a lock.

I did some tests and find out that indeed the Apex is updating all the columns used in the elements by Type of Source is the database column. Even if this item is display only, read-only, etc.!

My solution now, to prevent the locks, is the following:

Automated line Fetch:

Primary key column value containing point: Pxx_ID

ID of the primary key column: (this is the primary key)

Pxx_ID (display only, hidden or read-only)

Source: only when the current value in session state is set to zero

Source type: static assignment<-->

Source of value or expression:

Treatment of automatic line (DML)

Primary key column value containing point: Pxx_ID

Primary key column: ID

How to automatically generate associations in the EDMX using Entity Framework 'database first'?

Hello. I'm new on Entity Framework and the database that I connect Oracle 10 g. I develop using Visual Studio 2015, ODAC 12 c version 4 with the installed Visual Studio Tools and EF 6.1.3. I am generation an EDMX model from an existing database. In the Visual Studio wizard, I select the existing tables that have relationships of foreign key between them. The resulting EDMX contains the tables and their columns, but no association. I tried to do this using the code first of all existing database Wizard, and the results are similar: classes for the tables and column properties, but still no association or the properties of a class to contain instances of another. Should I be not expecting associations to be created automatically? Is there something I missed?

I'm back in it and found out what the problem was. Before you create the entity data model, I had to have the connection already defined in Server Explorer * using the ODP.NET* provider.

The current state of the target is down and it displays red arrow down in OEM 12 c. But in fact the database is running

Hi all
my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?
FYI,.
The error is:
The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.
A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.
Please help me, give your suggestions in this regard.

Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.

Kind regards

-Loc

Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

Hi all... I am a newbie with oracle database.,.
I have the problem of monitoring:
I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.
I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.
Installation-) before and during the hostname is localhost.
(-) After the installation, I changed the host name in VMCentOS
From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.
When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!
Can someone tell me if, maybe, the problem is with the host has changed? ... and why?
P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

Hello

It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

When you install EA or there is no script that starts the database at startup.

If you wish, you can create by yourself. For example search for instructions to Google how to create script.

Kind regards

Jari

Cannot display the results to the database during "Update": SQL statement

Hello
I get this error trying to update a VO via the UI or BCBrowser.
Cannot display the results to the database during "Update": SQL statement
This is a default single front & right THAT VO creates on the object of the entity (Database Table)
On the same table and with the same credentials of DB, I could update the record.
Any guess on what went wrong?
Thanks in advance for any help.
p.s Jdev 11.1.1.6
Journal:
oracle.jbo.DMLException: Houston-26041: could not publish data from database in "Update": SQL statement "START the CAR UPDATED CarEO SET SEL_ITEM =: 1 WHERE TXN_NO =: 2 AND LOGID =: AND SEQNO = 3: 4 POLL DELIVERY_MODE, CERTIFICATION_REQ, SOFT_COPY_IND, SELITEM IN: 5,: 6,: 7,: 8; END; ».
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:583)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8575)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6816)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3290)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3093)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2097)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2378)
at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1615)
at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1417)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:111)
to oracle.jbo.uicli.controls.JUNavigationBar$ NavButton.actionPerformed (JUNavigationBar.java:118)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
to java.awt.EventQueue.access$ 000 (EventQueue.java:85)
in java.awt.EventQueue$ 1.run(EventQueue.java:603)
in java.awt.EventQueue$ 1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)
in java.awt.EventQueue$ 2.run(EventQueue.java:617)
in java.awt.EventQueue$ 2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: invalid column type
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameterInternal(OracleCallableStatement.java:150)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:399)
at oracle.jdbc.driver.OracleCallableStatement.registerOutParameter(OracleCallableStatement.java:581)
at oracle.jdbc.driver.OracleCallableStatementWrapper.registerOutParameter(OracleCallableStatementWrapper.java:1765)
at oracle.jbo.server.OracleSQLBuilderImpl.bindUpdateStatement(OracleSQLBuilderImpl.java:2243)
at oracle.jbo.server.EntityImpl.bindDMLStatement(EntityImpl.java:10524)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:412)
... 52 more

The problem is solved now.

new columns added to the database table, after the creation of the entity object. Those changes were not picked up in the entity object.

I found this difference after object entity with the DB Table comparison.

And when I added these new columns to EO & VO, I don't get this error more.

Thanks to all who tried to help

Check if the automatic start of the database is enabled or not?

Grid Infra RDBMS/Version: 11.2.0.4
Platform: Oracle Linux 6.3
Disable us automatic restart with the CRS database by using the following command.
$ srvctl disable the database < name of comics > d
How can I check if the auto restart DB is enabled or disabled?

Add the - a switch to the command of srvctl config database. (of 11.2.0.3 GI + RDBMS):

[oracle@s600986sc0sl01 ~] $ srvctl disable the d SC01000 database

[oracle@s600986sc0sl01 ~] $ srvctl config database-d SC01000 - a

Unique name of database: SC01000

Name of the database: SC01000

...

Database is disabled

Database is managed administrator

[oracle@s600986sc0sl01 ~] $ srvctl activate database d SC01000

[oracle@s600986sc0sl01 ~] $ srvctl config database-d SC01000 - a

...

Database is enabled

Database is managed administrator

Bulk collect into the statement

Hi all
I'm trying to copy data using the database link.
I'm using the Oracle 11 g on Windows.
I check the data in the source table and it exists. When I run under block it is running successfully but do return no data in the target database.
SET SERVEROUTPUT ON
DECLARE
TYPE of t_bulk_collect_test_1 IS the TABLE OF NT_PROP % ROWTYPE;
l_tab1 t_bulk_collect_test_1;
CURSOR c_data1 IS
SELECT *.
OF NT_PROP@dp_copy;
BEGIN
OPEN c_data1.
LOOP
EXTRACTION c_data1
LOOSE COLLECTION l_tab1 LIMIT 10000;
commit;
WHEN OUTPUT l_tab1.count = 0;
END LOOP;
CLOSE C_data1;
END;
/
Could you get it someone please let me know what is the error in this code.
Thanks in advance

Bulk operation will not improve performance. Your code is a good example to show how to write code that is a performance nightmare. I'm sorry to say this, but it's the truth.

Static SQL is the fastest way to do it. As you will transfer the data via a DB connection it will be certain overhead. But the block is not the solution for it. Make a simple INSERT INTO... SELECT... Beh It's the best way to do what you want.

How to set up the database restarts automatically when the server starts?
Hello

What is involved if I configure Oracle database starts automatically when the server is started/restarted?

I guess that change the following entry in/etc/oratab
```
DEVDB:/u01/app/oracle/product/10.2.0/db_1:N
```
TO
```
DEVDB:/u01/app/oracle/product/10.2.0/db_1:Y
```
is not sufficient - there is more than that. But what is it?

We can also configure the listener to automatically re / start?

I guess that everything what is the solution, it will also apply to Oracle 11 GR 2 databases/ASM - right?

The platform is Redhat Linux 64 bit (version 4.7 & v5.9).

Thanks in advance!

Best regards
Hello

Below is one example of autostart services database and the listener.

1 > make/etc/oratab file entry Y as:
ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

2 > create a file called "/ etc/rc.d/init.d/oracle" as root, containing the following.
--------------------------------------
#! / bin/sh
# chkconfig: 345 99 10
Description #: Oracle automatic start-stop script.
#
# Define ORA_HOME as equivalent to the $ORACLE_HOME
# from which you want to run dbstart and dbshut;
#
# Define ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME server.

ORA_HOME=/U01/app/Oracle/product/10.2.0/Db_1
ORA_OWNER = oracle

If [! f $ORA_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
output
FI

case '$1' in
'Start')
# Run Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known - $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
known - $ORA_OWNER - c $ORA_HOME/bin/dbstart
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known - $ORA_OWNER - c $ORA_HOME/bin/dbshut
known - $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
;;
ESAC
-------------------------------------------------

3 > use the chmod command to set privileges to 755.
chmod 755 /etc/rc.d/init.d/oracle

4 > associate the appropriate oracle service run levels and set it to auto-start by using the following command.
chkconfig--level 345 oracle on

Note:-back, I've done this for a long time... Please check the dbstart use pfile or spfile to start the database instance.
Thank you

enabled automatic optimizer stats collection, but is not running and not appearing not
enabled automatic optimizer stats collection, but is not running and not appearing not

I've activated automatic optimizer stats collection days ago, but it never worked. DB version is 11 GR 2, OS redhat 5. It shows active in dba_autotask_client, but not in autotask_task. Please help on this issue.

SQL > select client_name, State of dba_autotask_client;

CLIENT_NAME STATUS
--------
ACTIVE automatic optimizer stats collection
advise OFF auto space
SQL tuning advisor ENABLED

SQL > select TaskName, status, to_char (last_good_date, ' ' YYYY-MM-DD HH24:MI:SS) last_good_date, last_good_duration
of dba_autotask_task
where client_name = "auto optimizer stats collection"; 2 3

no selected line

SQL > select program_action, number_of_arguments, active
of dba_scheduler_programs
where owner = 'SYS '.
and program_name = 'GATHER_STATS_PROG '; 2 3 4

PROGRAM_ACTION NUMBER_OF_ARGUMENTS ENABL

DBMS_STATS.gather_database_stats_job_proc 0 TRUE

SQL > select w.window_name, c.autotask_status, c.optimizer_stats, w.repeat_interval, w.enabled
-, w.duration, w.last_start_date, w.next_start_date
dba_autotask_window_clients 2 c, dba_scheduler_windows w
3 where 4 c.window_name = w.window_name
5 order by last_start_date desc;

WINDOW_NAME AUTOTASK OPTIMIZE ITS REPEAT_INTERVAL

MONDAY_WINDOW ON ON freq = all days; byday = MY. byhour = 22; byminute = 0; BYSECOND = 0 TRUE
SUNDAY_WINDOW ON ON freq = all days; byday = Sun; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
SATURDAY_WINDOW ON ON freq = all days; byday = SAT; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
FRIDAY_WINDOW ON ON freq = all days; byday = FRI; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
THURSDAY_WINDOW ON ON freq = all days; byday = THU; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
WEDNESDAY_WINDOW ON ON freq = all days; byday = SEA; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
TUESDAY_WINDOW ON ON freq = all days; byday = KILL; byhour = 22; byminute = 0; BYSECOND = 0 TRUE

7 selected lines.

SQL >
Select max (last_analyzed) from all_tables;

display SQL results above

SQL statement causes the database to hang
Guys,

a DBA told me that there is something wrong with this SQL statement and causes a blockage of database...

Please check.

SELECT field1 FROM table1 WHERE Field1 LIKE ' %% ' AND field2 = '123456' ORDER BY Field2 ASC

Tell me, what is the problem with statement above. The LIKE operator is?

Thanks for the help!
Are not specifically related to your question, but having a clause such as ' where Field2 ='123456 "and then you place your order on Field2 is not really going to do much for you, all values will be identical!

Carl

Automatic stats collection in the database

Similar Questions

Maybe you are looking for