Automatic update to Vista computer sent in an endless loop.

Similar Questions

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Adobe Contribute and Photoshop Elements 8 interrupt work with some automatic updates of Vista.

  With some Vista updates automatic Adobe Contribute and Photoshop 8 stop working until the moment where the programs must be uninstalled and reinstalled to operate again. After an automatic update, these two programs can be open to all, and an error message appears indicating that they must be reinstalled. Both programs are residing on a separate hard drive than the Vista operating system. This problem doesn't happen with every automatic update of Vista.

  Please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum. Don't forget to include the numbers of KB updates at the source of the problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Once more my automatic update of Vista stopped working today.

  Once more my automatic update of Vista stopped working today; It looks updates constantly and never ends. Set to automatic update was working yesterday the download and installation of Windows Defender - KB915597 (1.229.1407.0 and 1.229.1054.0 definitions).  This issue happened on August 9, 2016 when Windows Defender - KB915597 (definition 1.225.3489.0) has successfully installed on 8 August.

  Volume Z replied to my request for help the Oct 1 instruct me to download and run KB3185911 by his specific instructions.  This clear up my problem.  I tried to run this file (. Windows6 0-KB3185991-x 86.msu) still today after initial Volume Z instructions and received the notice, it did not apply to my system.

  The issue was revived by the release yesterday of KB3191203.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53972

  Best regards, VZ

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• My vista computer keep trying to restart loop error - driver_irql_not_less_or_equal "stop 0x000000D1"

  Original title: my vista computer keep trying to restart loop.

  He came once with the driver_irql_not_less_or_equal. blue screen exports also "stop 0x000000D1 0x00000002, 0x00000000, 0x87dfb395.» I tried to use the vista repair, but it does not start even. I can't go anywhere because I can't even use a limited boot option, is not to happen.

  Hi AllanHolland

  (1) remember to make changes?

  (2) what happens when you try to run the Startup Repair tool?

  
  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the keyboard and mouse and then start.

  Step 2: run the Startup Repair tool after disconnecting all external devices, see them steps mentioned in the link below

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  If the problem persists,

  
  Step 3: follow the steps mentioned in the link below to access the system recovery tools and then run the system restore
  How to access the System Recovery Options menu?

  For more information, please visit the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• How do I leave my membership? I am sent on an endless loop, trying to stop my membrrship. Help!

  I am sent on an endless loop trying to stop my subscription and or talk to customer support to stop my subscription. I do not use it. I don't want to.

  We are working on this, but there is no ETA for it right now.

  Concerning

  Stéphane

• LOST laptop computer SOUNDHave WITH WINDOWS. His lost after automatic updates for VISTA operating system. Don't KNOW HOW TO GET sound BACK. CAN SOMEONE HELP ME?

  Have a laptop with the Windows Vista operating system.  After an automatic update of 3 steps software, I had sound.available and can not hear anything when I use Media Player.   I don't know how to get the sound to my laptop.  Can someone give me some advice on what I can do to get

  my sound back on my laptop?

  Thanks for your help, I appreciate it.

  Rmartinehp

  Hi rmartinehp,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing the issue with sound, after the automatic updates, you have lost the sound.

  Before you start the troubleshooting steps, I need the information required.

  1. this problem occurs with particular application?

  2. (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry)

  I suggest you to see the links and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• CAPI2 event ID 11 error after installing updates on Vista computer

  Updated Vista and question CAPI2
  After the automatic update this week, restarted machine, I logged normal, but the display is in classic mode instead of Vista Aero. I also got the message pop up on the no connection to Event Services and certificates third invalid.

  I have checked the event viewer and see the CAPI2 ID 11 errors. I have restored and the previous checkpoint and versions updated again several times with the same result.

  I've seen previous problems of CAPI2 asked on the forums, but none with the symptom of classic view.

  Any help appreciated.

  Hello

  Scan a file system (CFS) checker on your computer and check if it makes a difference. Scan SFC will Windows replace corrupted or missing system files
  on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article:
  http://support.Microsoft.com/kb/929833

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic update of Vista enough work

  Automatic update Vista stop working, I can not even updates to download manually on the site to update, because the update of the window hangs.  I've been across the different boards, groups etc. looking for an answer.  Here's the problem:

  When the problem was detected:

  I was performing a Windows Update on July 28, 2009, the update process appears to hang when - at this time there, I finished the process via Task Manager (which says that the Windows Update did not) - since that this led to the problem with the update of Windows process still suspended.

  The system configuration:

  (1) HP Pavilion dv7 laptop
  (2) Intel Core 2 DUO P7350 CPU @ 2 GHz
  (3) 64-bit operating system running Service Pack 2 (4 GB Ram)
  (4) Vista Home Premium

  Behavior (I start the Windows Update process - the following happens each time):

  * The Windows Update process launches a blank page of IE with a crumb of bread from "Control Panel > Windows Update.
  * The wheel keeps spinning and over time, I'll "end task the" via Task Manager which translates into the following:
  -A dialog box opens saying "program does not.
  -When I FINISH the task another dialogue box opens saying "Windows Explorer is not responding" However windows Explorer will be finally complete and restart itself.

  Here are 3 of many Solutions of attempts:

  (1) msconfig to disable services Start Up items & disable (has not fixed the problem)
  (2) new installation Usr & run Windows Update (did not fix the problem)
  3) CMD - net stop wuauclt & bits (what was interesting because the system could not find wuauclt but he found pieces)

  I hope you can help as I am running out of ideas.

  See you soon,.

  Pinawa (Richard)

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Looks like there is a problem with the componetns of Windows Update.
   
  Try to perform the SFC scan
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5. If you have the enabled User Account Control (UAC) you will be asked for leave before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  Also you can try to run the system tool for Windows Vista update: http://support.microsoft.com/kb/947821
  It will be useful.
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic updates of Vista have deleted all the data on my desk.

  Recently my laptop Toshiba running Vista business done the automatic updates during the night, the morning I found that he had deleted all the folders, files and icons on my desktop (including the important work files), had changed the wallpaper, reset all my Internet properties and changed the login screen.

  What I can do, are very important files.

  I tried to restore the system to an earlier date, but this made no difference.

  I also tried to contact Microsoft, who acknowledged my report and said they would be back to me within one business day, which was seven days ago.

  Hi mbuk,.

  Welcome to Windows Vista answers Forums!

  With automatic updates, you want to lose the data stored on the system.

  Once removed the HDD data can't be recovered. However, you can use your favorite search engine to browse third-party data recovery software and use this software to recover data.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also view the following link to recover lost or deleted files and try the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Automatic update of Vista SP2 won't let windows not load? !! 0xC0000102! 3125/4933 (inkwatson.exe) this is where its decisions

  My Vista Home Basic which is pre installed on my Asus laptop computer did an automatic update to SP2 and then ask to reboot the computer, now I can not start vista it stops to! 0xC0000102! 3125/4933 (Inkwatson.exe). I tried to boot into safe mode (each of them listed) and cannot it stops at Loaded:\windows\system32\drivers\crcdisk.sys. I even tried to use my recovery disc but nothing comes even after pressing F9 only said memory and windows vista boot check in the Tools section... someone can tell me what to do
  I want to reformat the system but can no longer Hat
  Thnks in advance

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, , but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or repost in the Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or you can try this:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's the General information regarding the use of the recovery disk:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then restart with the recovery in the drive disc.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  See you soon.

  Mick Murphy - Microsoft partner

• How to stop or delay the system restart after automatic updates in Vista? This is the case most of the weeks and I lose what I'm working on at the time

  The Windows Vista system upgrades

  Configure automatic updates to one setting other than "auto". See to change the automatic update of the settings here: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Automatic update of Vista MS has stopped working 10 August 2016; It goes into an endless search.

  August 9, 2016 is shown in my last update of Windows Vista when Windows Defender - KB915597 (definition 1.225.3489.0) has been installed successfully.  When I opened the Windows Update window it shows "Windows is up to date" from the last control on 09/08/2016.  When I click on "Check for Updates", it goes into the endless search.  I tried different options already listed on this site without success.  I tried a 'system restore' back to August 7, but restored him failed because of an unspecified error.  I removed a number on startup package programs that may have affected the system such as Java and CCleaner, but nothing helped.

  Try the following: KB3185911 to install it manually. Download links:

  http://Wu.krelay.de/en/

  The value "never search for updates' automatic updates and reboot before installation manual.

  Best regards, VZ