Automatically generated header has & quot; Redefinition of the macro & quot;

Similar Questions

• Redefinition of the macro "TRIG".

  Recently, a difficult problem has been frustrating me. I created a few panels and them, then I've compiled creat some new panels, there will be some errors like "Redefinition of the"TRIG"macro."  ___TRIG is one of the panels;

  For example:

  now, I have a few panels, and the header file is:

  #define PANEL 2

  #define  RUN                                              3

  #define RUN_RUN 2 / * type of control: control, callback: (none) * /.

  #define INSTALLATION 4

  #define SETUP_SYSTEM 2 / * control type: tab, callback: (none) * /.
  #define TIMEPANEL 5

  #define TIMEPANEL_STARTTIME 2 / * control type: canvas, callback: (none) * /.
  #define  TRIG                                               6
  #define TRIG_MODEWORK 2 / * control type: binary, the callback function: (none) * /.

  When I create a new Panel "DROP":

  #define  DROP                                          2
  #define DROP_RESIDUAL 2 / * type of control: graphic, callback: (none) * /.

  #define PANEL 3

  #define  RUN                                              4

  #define RUN_RUN 2 / * type of control: control, callback: (none) * /.

  #define SETUP 5

  #define SETUP_SYSTEM 2 / * control type: tab, callback: (none) * /.
  #define TIMEPANEL 6

  #define TIMEPANEL_STARTTIME 2 / * control type: canvas, callback: (none) * /.
  #define  TRIG                                               7
  #define TRIG_MODEWORK 2 / * control type: binary, the callback function: (none) * /.

  the error is the redefinition of the macro 'TRIG' 'PANEL' "SETUP" "RUN"?

  What is the problem with them?   How to create a new Panel?  It has the same issue if I creat some new "digital"?

  Anticipating for your question.

  Each include file says :

  / * Caveat: do not add, remove or otherwise alter the content of the include file.                                         */

  You can regenerate by opening your GUI in the user interface editor, change a setting (backwards, for example a control up and down again), this will mark the user interface, such as amended so that you can save it.

• Can I automate creating a cluster in LabView using the structure of data created in a generated automatically. CSV, C header or XML file?

  Can I automate creating a cluster in LabView using the data structure created in an auto generated. CSV, C header or XML file?  I am trying to take the data structure defined in one or more of these files listed and have LabView automatically create a cluster with structure types and the same data.  (Ideally, I would like to do it with a C header file only.)  Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I looked in EasyXML and contacted the rep for the add-on.  Unfortunately, this feature was not created yet.  Did anyone done something like this before? Thanks in advance for the help.

  
  

• I have a paid site (it wasn't a demo for a few months) but robots.txt has this "# this file is automatically generated that your site is being tested." To remove it and to allow search engine indexing, please move your site to a paid plan. »

  I have a paid site (it wasn't a demo for a few months) but robots.txt has this "# this file is automatically generated that your site is being tested." To remove it and to allow search engine indexing, please update your site to a paid plan. ». How can I fix it?

  You should be able to create and upload a new file robtos.txt. Create a txt file and call robots. Put the content in the robots.txt file:

  User-agent: *.

  Allow: /.

  Site map: http://www.your-domian-goes-here.com/sitemap.xml

  Once created, download the robots.txt file in the root of your site.

• LabVIEW has an automatic generator of document API?

  Java's javadoc, which automatically generates the API documents.

  LabVIEW there equivalent or similar to that thing?

  The print files function can be called programmatically as well.  Pass a VI reference in an Invoke node and select printing > VI to function HTML to generate the HTML for the VI documentation.

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Microsoft sent me an auto update KB 2656369 for my Dellxp. The automatic update has tried to load the patch about 9 times but it failed.

  Microsoft sent me an auto update KB 2656369 for my Dellxp. The automatic update has tried to load the patch about 9 times but it failed.

  http://support.Microsoft.com/kb/2656369

  How to get help and support for this security update

  Help to install updates: Microsoft Update Support (http://support.microsoft.com/ph/6527)

  Help protect your computer running Windows against viruses and malware: Virus Solution and Security Center (http://support.microsoft.com/contactus/cu_sc_virsec_master)

• Software that has a compatibility with the windows operating system 8, applies to windows 8.1system automatically?

  I just want to know when you buy a software that has a compatibility with the operating system windows 8, applies to windows 8.1system automatically?

  Former title: compatibility

  Yes, he does.  Windows 8.1 is compatible with Windows 8.0.  In fact, it can run almost all programs built for 7, Vista and XP as well.

• Jdev 12.2.1, automatically generate the password when creating a new user

  Hello

  Just by creating a new Admin user wants to automatically generate the password based on specific conditions and some mail users e-mail ID entered during creation.

  Please help me find the solution

  Nikhil

  Hi Timo,

  create new user with the username, userid, e-mail, etc. and the strength to change password to true by default. and the implimentation of security as capital letters, Lowwercase, number, at least one special character. There is no need of plu username. just something random.

• I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrat

  I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrating!

  Hi rct_nv ,

  Please provide the exact version of the acrobat application (given that no update available for acrobat 9 as its an older version)

  In addition, I wish to inform that Acrobat 9 is not compatible with Win 10 OS. Refer to this article:- Adobe Acrobat required configuration

  Kind regards

  Christian

• How to change the automatic generated wsdl for the procedure

  I configured xdb and as far as I know, for each procedure that I expose as a web service, oracle automatically creates a wsdl.

  I would like to change this wsdl, but I don't know where I do.

  For example:
  It is a part of the wsdl file I want to edit:

  From:

  < types >

  "< xsd: Schema targetNamespace=""" elementFormDefault= "qualified">

  "< xsd: Element name="TESTE_AUXInput">"

  < xsd: complexType >

  < xsd: SEQUENCE >

  "< xsd: Element name="P_VAR-VARCHAR2-IN"" type= "xsd: String"/ >

  TO:

  < types >

  "< xsd: Schema targetNamespace=""" elementFormDefault= "qualified">

  "< xsd: Element name="TESTE_AUXInput">"

  < xsd: complexType >

  < xsd: SEQUENCE >

  "" < xsd: Element name= "P_VAR-VARCHAR2-IN" " minOccurs="0" maxOccurs="1"oraxdb:propNumber = '4608' oraxdb: global ="false"oraxdb:SQLName ="VAR VARCHAR2 IN"oraxdb:SQLType ="VARCHAR2"oraxdb:memType ="1"oraxdb:MemInline ="true"oraxdb:SQLInline ="true"oraxdb:JavaInline ="true"' type="xsd: String"/ >

  
  

  
  

  
  

  
  

  I tried to create a "TESTE_AUXInput" type, but it changed nothing.

  
  

  I heard it has to do with the XML schemas, but I tried to create an xml schema that contains:

  
  

  "" < xsd: Element name= "P_VAR-VARCHAR2-IN" " minOccurs="0" maxOccurs="1"oraxdb:propNumber = '4608' oraxdb: global ="false"oraxdb:SQLName ="VAR VARCHAR2 IN"oraxdb:SQLType ="VARCHAR2"oraxdb:memType ="1"oraxdb:MemInline ="true"oraxdb:SQLInline ="true"oraxdb:JavaInline ="true"' type="xsd: String"/ >

  < xsd:simpleType >

  < xsd:restriction base = "XSD: String" >

  < xsd:minLength value = "1" / >

  < xsd:maxLength value = "100" / >

  < / xsd:restriction >

  < / xsd:simpleType >

  < / xsd: element >

  
  
  But I don't know how to do the procedure to use wsdl.
  How can I do?
  
  
  
  INFO:
  Oracle 11.2.0.4 standard edition
  Oracle linux 5
  
  
  If you need any other information, let me know.
  
  
  Thanks in advance.
  

  And the answer is always no, the wsdl file cannot be changed.

• In the form of sales_order, after booking, schedule_ship_date is automatically generated. On what basis he gets calculated?

  In the form of sales_order, after booking, schedule_ship_date is automatically generated. On what basis he gets calculated?

  And in my case, it's generated as 31 dec 2012 and I am unable to change it. How and where can I change it?

  Please tell me the navigation.

  Hello

  Please check the defaulting rules for SSD

  Thank you

  Ranga

• I need someone to walk me through how to get Photoshop to recognize cc I downloaded the plug 9.1 raw in.  I thought that this would happen automatically, but it has not changed in photoshop.

  I need someone to walk me through how to get Photoshop to recognize cc I downloaded the plug 9.1 raw in.  I thought that this would happen automatically, but it has not changed in photoshop.  I ran the installer for the plug in but it didn't ask me what to do next.  The responses I get are all over the map on this so I'm writing again. the wording of the question differently.

  There was some problems with loading 2015 ACR 8. You may need to reinstall Photoshop. Which seem to help a lot of people.

• Entry entry not added to the automatically generated table of contents

  Using RoboHelp HTML 11.

  I'm linking a Word document into my project and have it automatically create the Table of contents. I create new pages from the Word title 1 and title 2.

  As a general rule, a section in Word will be like this:

  Heading 1

  Body

  Section 1.1

  Body

  Section 1.2

  Body

  In the table of contents, it will create a book labeled "Heading 1" and pages for 1.1 and 1.2 position position. There is no page for heading 1 or the body of the text that goes there.

  I can manually add the title page 1 of the book, but I suspect that I don't have to. Y at - it a setting I use wrong? Or a tip or solution?

  
  Thank you.

  -Shawn

  If you click on the book for heading 1, it go to the right place and show the body of the text?

  Separate headings are created for heading 1, section 1.1. etc., or is - this a topic with the table of contents goes to the required place?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge