Automatically reduce the copy on my M1212nf MFP printer

Similar Questions

• Mobile Lightroom automatically reduce the size of the photo. Why?

  The original photo I took with the iphone is 2448 * 3264, 1.64 mb. When I import the photo in Lightroom for mobile it automatically reduce the size of 2048 * 1536, 446 kb. Why? How to disable this option?

  Hello

  Since version 2.2 Lr mobile on iOS now uses the output of full resolution:
  Lightroom mobile for iOS 2.2 now available with the release of Full-Resolution "Julieanne Kost's Blog

  Thank you

  Ignacio

• HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue

  Hello world

  I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1

  Updates are made, tried to reinstall ect.

  Now, when I tried to print it says required attantion

  But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.

  Any idea what could be the problem?

  I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name

  Help, please!

  Thanks for the help everyone, I managed to solve the problem.

  The soluction (Windows 10)

  Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)

  Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver

  In the future no update new printer

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,

• I want to send to automatically reduce the size of the picture to send.

  My email used to give me the option to automatically make the photos to send, but then it just stopped.

  How to get back this option please?  It is used to automatically birng up a box saying "reduce size" or "maintain the original size" or something similar.

  I use Outlook Express 6.

  Hello rossmount

  If the question has recently occurred then may I suggest you use system restore. Follow the link below for instructions.
  http://support.Microsoft.com/kb/306084
  You can also try Image Resizer. This can help as well.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

• LaserJet M1212nf MFP prints on labels

  My Laserjet M1212nf MFP will not be printed on the labels. Select 'labels' as the paper type, I get the large popup telling me to load support.

  I use Avery 5160 labels

  I can print the same labels on plain paper without problem.

  Hi Michel,.

  When the printer is set to the current settings and receives a request for the written press which is not currently installed and configured in the printer, it will prompt you can load the media is requested to print on.

  According to the description, it seems that the printer has not said the type of media that is loaded in the tray.   When he thinks that the driver you select labels, the printer itself, it commissioned from plain and requests that you load the labels.

  The following is a section of the User Guide. On Page 57 there are instructions to change the setting from the default document type.  If this setting is changed to 'Labels' and 'Labels' request from the driver, you should not get the prompt on the control panel again.

  

  Please try this and see if the prompt disappears.

• How to reduce the pri ha'nting on a printer 7760 seris

  The printer is a H P 7760 sreis.  I would like to redice the images.

  Help.

  Thanks Digger1315

  Welcome to the @digger1315 forums

  I understand that you're looking to resize your images. My best advice would be to check in the printing preferences in any program you use to see if there is an option to reduce the size.

  Here is an example of Microsoft Paint:

  

  I hope that helps!

  Have a great day!

• laptop Dell automatically reduces the brightness of

  My dell mp5040 automatically fades immediately when it's plugged in and fades sfter a minute or two on the battery. I tried troobleshooting and adjust power settings, but nothing worked... Please help me

  Hi Kolla,

  This problem can occur because settings of dough, try the following methods and check if it helps.

  Method 1:

  I suggest to change the brightness of the screen and check if it helps.

  Control Panel and Power Options, click on the left side of the Panel and adjust the brightness of the display

  Method 2:

  I suggest to create a new power plan and check if it helps.

  Configure power management: http://technet.microsoft.com/en-us/library/dd744398 (WS.10) .aspx

  Note: If the problem persists, I recommend you post the same question in the Dell Forums and check if it helps.

  DELL Support Forums

  Keep us updated on the status of the issue.

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• HP Laserjet m1212nf mfp printer: cannot set RINGS TO ANSWER

  Hello

  I have the printer HP Laserjet 1212nf.

  It works very well in the past.

  The fax was not connected during the last year.

  Now, I reconnected and I can't send or receive faxes.

  I also see that I can't set the number of rings to answer - is what I see on the fax screen: 0 (0-0)

  Can it be fixed?

  Thanks to you all

  Hi @AmirTA,

  Have you tried the reset I sent you private message?

  If you can't change the settings of the printer, I would suggest to update the firmware of the printer: LJM1130_M1210_FW_Upgrade_Security_signed - 20150405.exe

  It may be a hardware problem, if the options in the menu, you cannot change them.

  You must use a cable 2 son.

  Voicemail can interfere with faxes that crosses. One suggestion would be to get setup distinctive ring on the line or to disable voicemail.

  You can set the fax to the manual, but you must press the printer button each time to receive the fax.

  Keep me posted. Thank you.

• M1212nf MFP prints but does not analyse in OS 10.9

  OS 10.9, this printer drivers are supposed to be updated by the software update. However, there is no update available, and the system does not recognize the device as a device of image capture. Therefore, it is not possible to scan with preview, Capture of Image or printing and scanning window.

  In the Help window, there is a note which refers to the HP scanning software. But I can't find anywhere.

  This equipment will work correctly in OS 10.9?

  It turns out that I had the same problem as this guy: http://forums.macrumors.com/showthread.php?t=1211760

  I reinstalled OS 10.9 and that solved the problem.

• HP M1212nf Mfp printer installed via USB Port

  I checked all my software and hardware, but when I install the printer using the printer installation disc works. But when I turned my computer off and restart the computer, the printer does not print. The printer indicates a default printer and the printer says ready, but I get nothing. I can re-install and get it printed, but it disconnects when I turn off my computer. I have another printer Dell I can go to and it will be printed, but HP will not.

  HP printer to a USB port facilities requires installation of driver CD must be started before the printer is connected to a USB port.

• change the display of the Chinese language to English on LaserJet M1212nf MFP

  Hello

  How do you change the display of the Chinese language to English on a LaserJet M1212nf MFP printer?

  its screen was English before but someone changed the Chinese and we do not know how to change the display in English language

  Hello

  Please, try the following steps:

  • Press the power button to turn the product on.
  • On the Control Panel, press the Setup button to open the main menu.
  • Press the left arrow key three times to select the system setup and press OK. The language option opens.
  • Press OK to open the language menu.
  • Press the right arrow key to select the language that you want to display, and then press OK.
    Press the back button to return to the main menu.

  Kind regards.

• I use an old CRT monitor, I can REDUCE the appearance, so I don't have to scroll to the right?

  Almost all sites Web throws himself on the edge of the Visual field available on the old monitor, so I have to scroll to the right, just to see the whole field. I realize it's showing of the newest, wide-aspect ratio, but is there a way to automatically reduce the field to fit my screen? I'll try to change my display settings, but who will do the much smaller type, I think that... Be vigilant and thank you, DAVID

  What is the screen resolution (width and height)?

  Some sites Web always displays with 1024 x 768, but many require a larger screen avoid horizontal scrolling.
  
  If you have less than 1024 x 768 then you should consider buying a LCD.
  
  An LCD is probably much cheaper while you have paid for the CRT screen and are also more easy on the eyes (the pixels are one and flicker).

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!