Back up data before removing the batteries

Similar Questions

• Satellite M300 - how do I back up the data before using the recovery disk

  Hello everyone,

  Today, I closed my laptop Toshiba Satellite M300.
  Just after a few seconds, it automatically in service and reported some "boot error".

  She also suggested I put on the recovery CD. When I put the CD, nothing happened.
  After awhile, I read the instructions in the CD cover that says that I have to hold the C button and it will start the recovery process.

  How the process goes, the system told me that all the files that I had in the computer would be removed.
  Is it possible how I could back up my documents before as I recover my Vista?

  I would be very grateful if someone could help me!

  Sincerely,

  Milan

  Hello

  If I understand correctly, you are not able to boot into the Windows operating system; According to the normal starting procedure or by using safe mode. Is this good?

  If Yes, then I don't see many options to get access to the files on the HARD drive.
  What you could try is to remove the HARD drive and use an external USB 2.5 enclosure to connect the HARD drive on another computer.
  Then you could test whether it is possible to access the HARD disk and save the data.

  The Toshiba Recovery disk does not any option that allows you to save the data, the drive formats the HARD drive and erases all partitions.

• I want to configure firefox in kiosk mode, but I need to have the Back button (and before) and the available home button.

  The computer will be used only to access online catalog in my library. I need to remove the location toolbar, but keep the "back" button and the "home" button. If I use the Kiosk mode, I do not have the "previous" button. I can set it up so that I have the buttons but not the URL, but a user could right-click on the menu bar and reactivate the address bar. I need to stop them from doing it.
  Thank you!

  Users can always bring up an address bar with the shortcut Ctrl + L if this bar is hidden.

  One possibility is to hide the toolbar elements and elements of (context) menu with code in userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #openLocation, #urlbar-container, #CustomizeToolbarWindow, #toolbar-context-menu {
   display:none!important;
  }
  

• date picker - remove the calendar icon

  HELO,
  
  is there a way I can remove the calendar date picker icon?
  
  Thanks for the help!
  
  Kind regards
  drama9346

  Hey,.

  -Change the page element date picker
  -Find the "Settings" section
  -Select "development" to the selection list 'Show '.

  To hide the date picker calendar icon.

• How to upgrade existing data by removing the part of the text

  Hello
  
  For my column in table 'Last Name', the values are 'name '. I want to update data with the name of the user by removing the name and the ' / '.
  
  Any suggestions? Thank you.
  
  Column name
  John_Miller
  Jack_Webb
  
  
  Last_Name column after update
  Miller
  Webb

  Good afternoon

  Try this:

  Update name_table
  the value of last_name = substr (last_name, instr(last_name,'/'), length (last_name));

  Good luck
  Don.

  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone! :)

• Could I get back my data before something occur in the clouds? I made a very serious mistake me

  I rost my important data by mistake.

  How can I go back?

  You have no CC registered under this Adobe ID, if you are using the trial & works, you can save your projects before they expire.

  Concerning

  Stéphane

• Can satellite A210 - 11K - I recover my data before using the recovery disk?

  Hello

  Basically, my laptop has been slain in a loop of startup repair so my only option is to use the recovery CD. However, I have some files I have not back upward until my laptop decided to do not on me. Is there a way in which I can retrieve these files while at the same time fixing my laptop?

  I am running Windows Vista SP1.

  Thanks for any help,

  Felix

  Hello

  You can save your data if you put the HARD drive into an external HARD drive enclosure. Then, you can connect it to a laptop or PC and you can save the data on it or burn it to a DVD.
  All that s!

  These cases of disc HARD external are very good markets. I bought my drive enclosure external HARD on eBay and it s works well.

  But there is no other way to save the data as the Toshiba recovery disc erase the whole HARD drive and every disk HARD will be erased.

  Welcome them

• To restore Windows 7 to an earlier date before that the virus was noticeable, get rid of the virus?

  In recent weeks, my system has started to degrade and slowly get worse, it seems like a virus. I've restored a few weeks back system and the level of degradation was not as bad... it seems like it was in the early stages of the virus. If I restore it at an early enough date, I can rid my computer of viruses?

  You probably don't have a restore point fairly early, and even if you did, it can cause problems with the other stuff.

  What have you done outside a system restore?

  Have you tried use Malwarebytes?

  http://www.Malwarebytes.org/

  Either this...

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How to download the 'C' on a CD drive before removing the drive 'C '.

  Download 'C' drive via a USB port info

  You want to copy your data (documents, pictures, music, etc.) on an external drive.

  It is a good idea.

  What do you mean by "I am unable to open the drive?

  • Windows starts?
  • Are what drive you referring?  It matches your CD player that does not work or is that your hard drive is not working?
  • Can you access your files now?

  If Windows does not work normally, please describe the symptoms, including the full text of the error messages, without paraphrasing.

  You bought an external USB disk?  If Yes, what brand and model?

• my laptop is divided into 2 profiles. How can I remove the 2 profiles without deleting the programs in profiles

  I want to remove the 2 profiles that divides my laptop. I wish well for my laptop one without loseing computer programs that have been added. My laptop is a Dell Inspiron 2650

  Oh

  Here is an answer from another forum posted by Rick Rogers:

  "There is no method of merging the accounts, simply choose one or.
  others and save the data of the impeachment.

  Start and connect to one you want to keep. Open Windows Explorer as
  Administrator (click right/run as admin) and take ownership of files in
  the other profile that you want to save (under your registered profile). You may need to go to start / Control Panel / folder
  Options/display/and check the box to see hidden and system files to do (if you do not, you will not miss important information - in particular about your programs). Move the
  files you want to put on your user profile. »

  There are some files that you should not move - they are documented in the following article: http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile (which is very close to what do you except that you are not from a user account fresh but one that already exists).

  NOTE: Before removing the old profile, I would make absolutely sure all your data are moved and accessible, and that all your programs work correctly.  The time to solve a problem, if there is while you still have available data - not after it has been deleted.  Frankly, I'd let the old profile sitting there for a few weeks or more, just to be on the right side (if you have the space, and I suspect you do).

  Here is more information about the permissions you need permissions in its own right and to take ownership of:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove the laptop battery?

  Hello!

  My question seems a little odd, isn't it? I bought a HP Pavilion dv7-1285DX two months ago. I don't know how to remove the battery from the laptop! Sounds crazy, I use HP laptop for 5 years, but I could not understand how the hell should I take the battery from this new guy! Could someone please tell me what to do. If you know how to do it please show it with a photo or something, or set up a website or video or something.
  Thank you and all comments are appreciated.

  Siar

  Message edited by Siar on 13/10/2009 02:26

  Hello

  Follow these steps: -.

  BE VERY CAREFUL!

  Before you begin any Setup or uninstall procedure:

  1 shut down the computer. If you do not know if the

  computer is turned off or in hibernation, turn on the computer.

  and then stop it through the operating system.

  2. disconnect all the external devices connected to the computer.

  3. disconnect the power cord.

  4. remove the battery by following these steps:

  a. turn the computer upside down with the front

  towards you.

  b. drag and hold the 1 battery release latch to the left.

  (Disengage the front edge of the battery of)

  the computer).

  c. lift the front edge of the battery 2 and bring her back.

  d. remove the battery.

   

  Reverse the above procedure to install the battery.

• How to remove the files SENT in duplicate?

  I have two files sent to my email address. One is a stand-alone file is either a subfolder in gmail. This has caused confusion as messages go to the two records and must be moved or deleted separately.

  Is there a purpose to having two records SENT?

  Can I delete one? If yes how?

  Thanks GeoSing

  Read it back. She says remove the control, as in uncheck.

• How can I remove the application dropbox to my Imac?

  iMAC 21.5 Inc.

  OXS X El capitan

  10.11.3 Versie

  How can I remove the application dropbox to my Imac?

  I get a warning when I click on the dropbox app to delete!

  Thank you very much

  ollylibby

  Official instructions are here-> https://www.dropbox.com/help/41

  It helps tremendously if you actually post the text of the error message that you receive.

  You may need to view the activity monitor, search for dropbox and stop all processes before removing the Dropbox app in the folder/Applications.

• Re: How to remove the Package of added value?

  I'm having issues (media buttons no longer work) with the package of added value of Toshiba (TAVP) on my Portege M800.
  I want to update, but I can't do it before removing the old version of the TAVP. When I try to install the new TAVP, I get an error message saying that I need to remove the old version first.

  Problem is, I can't find the TAVP on my "Add/Remove Programs" list The internet said it should be on the list, but it is not. The programs are on my computer.

  They do not seem to be among the programs 'package of added value '. How can I remove the TAVP?

  I use Vista and Win7 long on two laptops from Toshiba. On two of them Toshiba Value added Package is listed in the control panel > programs and features and then you can start to uninstall option.

  I've done this several times. It must be there. He is listed as TOSHIBA Value added Package. Check it out at the bottom of the list under T.

• Satellite L750-A218 - how easily / safely remove the MMC card

  Hello

  I just tried the MMS and inserted a MMC console.
  I have a question now. After eject devices.

  How to remove it properly. I tried pushing gently so that it would make the ticking and make out but that has not worked. I didn't force and ruin the slot. I can get out, but I have to raise the laptop.
  On the user manual. Those are the steps for removal:

  1. open the icon remove the device safely and eject media on the Windows taskbar.
  2. tap media memory and click on the left Touch Pad button.
  3. Enter the media up and out of the computer to remove it.

  I have not quite step 2. Please explain to me how easily / safely remove the MMC on this laptop.
  Also, tell me if pushing the MMC will be out or not.

  Hello

  What card insert you? MMC (MultiMediaCard)?
  Usually you will need to enter the card and pull it out of the computer s slot to remove the media but when you insert the support of memory in the wrong direction, you will not be able to remove

  > I have not quite step 2. Please explain to me how easily / safely remove the MMC on this laptop.
  In most cases the task bar contains a small icon showing that the media card is inserted...
  We must therefore stop this read/write process before removing the card...