Can satellite A210 - 11K - I recover my data before using the recovery disk?

Hello

Basically, my laptop has been slain in a loop of startup repair so my only option is to use the recovery CD. However, I have some files I have not back upward until my laptop decided to do not on me. Is there a way in which I can retrieve these files while at the same time fixing my laptop?

I am running Windows Vista SP1.

Thanks for any help,

Felix

Hello

You can save your data if you put the HARD drive into an external HARD drive enclosure. Then, you can connect it to a laptop or PC and you can save the data on it or burn it to a DVD.
All that s!

These cases of disc HARD external are very good markets. I bought my drive enclosure external HARD on eBay and it s works well.

But there is no other way to save the data as the Toshiba recovery disc erase the whole HARD drive and every disk HARD will be erased.

Welcome them

Tags: Toshiba

Similar Questions

  • Info satellite A210 171 what do I need before using the recovery disk?

    Hello

    I have 1 recovery disk that came with my equium, have not used before.
    It says on the back of the envelope of recovery disk 'insert the first diskette.

    I guess there should be a second?

    Also this info I need to provide during the installation process? as serial number?
    All I have a black and white sticker that is on the side of the box, it came in, but it was so long ago.

    I'm having a lot of problems with windows install does not and many others.
    Windows updates do not work either and I tried to correct those, but a clean reinstall of the operating system has been recommended.
    Now, at this point nothing will install because windows setup will not work.
    So I think I wil lhave to try a clean install, but I do know that the cd player works.

    I got a great run on this laptop, little slow today for my needs, but all very good product, purchased in 2007.
    With a clean OS and 4 GB of ram that could last for years, cannot afford a new right now.
    I really tried to avoid using a disc of recovery in the past, as I have never had problems until now.

    Thank you

    Post edited by: sounds

    > I have 1 recovery disk that came with my equium, have not used before.
    > On the back of the envelope of recovery disk, it says 'insert the first diskette.
    > I guess there should be a second?

    I m wondering why you get this disc with your laptop, why? Because I do not have the recovery disk, but I had to create one using the Toshiba recovery disc creator software
    But my laptop is more recent that your A210 might be the reason why you have this drive

    I have created a recovery disk and I needed two-disc DVD, I think it depends on the size of the image file

    > Also what information I need to provide during the installation process? as serial number?
    This is not necessary because your system has already been activated.

    But I recommend you backup your personal data, because the recovery disk would format the whole HARD drive and you will lose the files.

    PS: you should read other threads in product recovery forum!

  • Satellite M300 - how do I back up the data before using the recovery disk

    Hello everyone,

    Today, I closed my laptop Toshiba Satellite M300.
    Just after a few seconds, it automatically in service and reported some "boot error".

    She also suggested I put on the recovery CD. When I put the CD, nothing happened.
    After awhile, I read the instructions in the CD cover that says that I have to hold the C button and it will start the recovery process.

    How the process goes, the system told me that all the files that I had in the computer would be removed.
    Is it possible how I could back up my documents before as I recover my Vista?

    I would be very grateful if someone could help me!

    Sincerely,

    Milan

    Hello

    If I understand correctly, you are not able to boot into the Windows operating system; According to the normal starting procedure or by using safe mode. Is this good?

    If Yes, then I don't see many options to get access to the files on the HARD drive.
    What you could try is to remove the HARD drive and use an external USB 2.5 enclosure to connect the HARD drive on another computer.
    Then you could test whether it is possible to access the HARD disk and save the data.

    The Toshiba Recovery disk does not any option that allows you to save the data, the drive formats the HARD drive and erases all partitions.

  • How to recover files before using the recovery disk?

    Hello

    I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

    Hello

    In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

    An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

  • I would like to recover my computer by using the recovery disks that I created. There is NO OPTION!

    I have a ' aspir ' 5750-6414

    I got a bad virus, but I did create recovery disk (4 or them)

    I would like to recover my computer by using the recovery IMAGE.

    The bootable disc, but it does not give me the option to use MY recovery disks. It gives only factury default of restore options.

    I tried to restore my computer to the image I created when the computer was new that had a lot of my program, including ms word for hour.

    Can anyone help?

    Thank you. That's why presence. The person who set up my computer a few years ago gave me these discs and I assumed it was a picture. My mistake.

  • Re: Satellite M35 S359 - 'machine wrongly' while trying to use the recovery disk

    I used it several times without fail. After that the laptop started acting a little strange recently (malware maybe) I decided it was time to rebuild. This time, I had 'bad machine' attempt of recovery CD error. I installed the brand new Toshiba HD, but still the same error message.

    I've searched and searched and find it is a 'classic' error but with many varied suggestions correct - which none had me up and running.

    So I hope someone can point me in the right direction.

    THX.

    Hello

    It is model Toshiba U.S. and so I looked on the Toshiba page for some suggestions.
    And I found this doc from Toshiba:

    [How to eliminate the error message "Machine hurt" during the restoration of the image of the software factory (recovery CD): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1031 711xml & sliceId = & dialogid = 59324518 & stateId = 1 0 59322815]

    As suggested in another thread, the information stored in the DMI may not correspond with the info on the recovery disk and so this message appears.
    I don't know if the doc of Toshiba will help you but it s worth a try m.

    If you will not find a good tool DMI, then you will need to request the ASP in your country a DMI update!

    Good bye

  • Re: Satellite Pro A210, stil does not start after you use the recovery disk

    Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

    He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

    I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

    Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

    Thanks in advance.

    Hello

    Never heard talk of this error but sounds strange
    If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

    Well, in this case the HARD disk must be OK because the files were copied correctly

    I searched a bit in google and didn t have found a solution to 100%.
    Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

    You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

    PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
    Its free tool. You can find using google

  • Satellite L750-1LC - Boot Manager is missing by using the recovery disk

    I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

    On the first dvd that only he came an error reading twice, the other DVDs were ok.
    When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

    After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

    Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
    If so, what are the steps to qualify for this promotion?

    I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

    It seems that the first recovery disk is not created properly because you got an error message.
    As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

    Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
    I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

    PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

  • Satellite L450 - X 13 not turn on after using the recovery disk

    Problem climbed down after turning off suddenly. Initially could not get windows OS to work while I used the recovery disc. After it has been successfully used all of the computer has been cut and will not start (dead whole machine) despite the battery power and common alternative in place.

    When you press power button / stop the led green lights for a second and then immediately turns off, no attempt to start engine.

    Someone at - he seen this before or has any ideas?

    Remove the battery, disconnect the power supply, leave the laptop for now and try to start with power current only.
    The same thing happens again?

  • Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

    I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

    How can I fix my computer!

    Any help would be greatly appreciated.

    Have you tried to format the HARD disk until you try to use the recovery disk?
    Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

    But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

  • Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

    I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

    I expect your support...
    Thank you very much...

    Hello

    Yes, you can do it!
    If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

    Welcome them

  • Satellite M300 - how to use the recovery disk

    Hello world

    I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

    Any suggestions?

    Hello

    You can use the only recovery disk to reinstall the whole OS!
    This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

    If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
    Then the installation of the OS should move forward and you should follow the instructions on the screen.

    All that s

  • Satellite U300 - how to use the recovery disk?

    I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
    I really need to fix my cause cell it's time to review!

    Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

    Thank you!

    Hello!

    If you have inserted the recovery disc you must only start her everything that s!

    I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

    Good bye

  • Satellite L300 - can't reinstall Vista using the recovery disk

    My daughters Satellite L300 gave problems that seem to be hard disk errors.
    I installed a new hard drive and tried to reinstall vista from the recovery of the product CD.
    Partitions are created successfully and then I get an error "C:\program files\adobe\acrobat restoration...". several times followed by etc

    "image restoration of error."

    "The file or directory is corrupted and unreadable."

    "Imagex error not to VISTA F:\06235XSP.svm Index 2 odd c:\!

    "Press a key to continue."

    And thye ned.

    All ideas

    Hello

    Hmm, looks like the laptop cannot restore the operating system from the recovery image
    To be honest I'm not very well why this error pops up but eventually it s m related to the new HARD drive installation.

    Perhaps, you can format the HARD drive again using a clean Microsoft Windows CD (Win XP, etc.).
    Boot from the CD of Win and format the HARD drive.
    Then go to the recovery disk, boot from the recovery disc and try reinstalling the operating system

    Maybe it would work

  • Satellite L350 won't start or recover using the recovery disks

    My L350 suffered a hard disk problem and wouldn't start. He attempted an ASR, but failed. I rebooted after the system recovery cd that I created when the laptop was bought first, but the recovery fails in image 5.

    Does anyone have advice?

    Have you used these recovery disks in the past?
    If the drives are OK I can imagine there is a problem with the HARD drive but I m not 100% sure about this.

Maybe you are looking for

  • iPad news sites always loading in the Middle

    Why always charge my Web sites of newspapers in the middle of the page of the site? I always have to scroll up to the mast-head to read from the top. Is there a display setting that I don't know? Thank you.

  • Fraudsters

    Some time ago I was sent a friend of an unknown user "xxxxx xxxxxx" request knowing I had idea of who it was so I thought ishould accepts and see who it is, just today this person contacted me after agreeing, he asks friend and what she said was not

  • 'DAQmxReserveNetworkDevice' was not declared in this scope

    Hey guys. I have a problem with this function. I have already included NIDAQmx.h in my aplication c ++ and the functions of this header works. However, I was checking and "DAQmxReserveNetworkDevice" was not included in the header, identical to DAQmxA

  • HP LaserJet Pro 100 color MFP: install the driver for color laserjet MFP m175a pro 100 failed at about 83%

    When I connected the printer to the system recognizes it as a cd player. I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg. UAC is disabled and .net framework advanced fetures is not installed. I see

  • For best practices

    Reading on the web make me thing if im doing good things on BB as im starting. Can someone tell me which would be the best way in this case? And if I can get a nice link to read more info on this type of advice would be nice. staticclassFoo{ int mSpl