Background pattern does not record correctly.

Similar Questions

• Y580 background winds does not work correctly... help!

  Hi all, I just got my new Y580 a week ago. I use HWMonitor to check the internal temperature. The highest ever record temperature is 81 c for the CPU (where the game). I think it's high enough, think that I have the laptop high about 3 inches off the table and my room is quite cold (it's winter here). So I checked to see if the low 3 vents are working properly. I think that the bottom venting air draws in to cool the Interior. So if I use a small piece of paper, he should stick to the passage because it is sucking air. The piece of paper only stick to the upper vent (the one near the ventilation hole on the side of the laptop), but not the bottom 2. Also, the upper vent feels kind of cold to the touch after extended use, which make sense, because it is sucking air. However, the lower 2 events feel the same and feel a little warm. This thread believe me the 2 vents below even does not work properly.

  
  

• Match pattern does not work correctly when you are looking for a null character

  I use the match pattern to retrieve a string NULL completed a response, I'm getting a device on a serial port. The VI is attached and here is a screenshot of the block diagram.

  It works very well with the index value 0, 1, or 2. When index is 3, I get the result below.

  Why model matching is not finding the null character?

  Thank you!

  

  

  I'm Datura, need to remove the cable from the shift control for the control of the match pattern.

  DUH!

• Why to acquire her VI % 27s does not record correct samples % 2Fch

  Hi all

  Not an important issue right now, but interested if anyone knows why.

  LV2011 using full development and work with the base acquire its VI.  Its very strange, but I put the sampling to tell 48000 Hz and samples/ch 96000 frequency assuming I'd get 2 seconds worth of data, but I get 1.5 seconds and data points only 72000.  Cut not exactly half a second off the coast, ive done a few different variations.  There is nothing special about this VI im for help, I did the same thing with the express VI and got the same results.

  Someone at - it indexes?

  Thank you

  Matt

  It's got to be a weird thing buffer then... Maybe my computer is able to fill the buffer up to the top, but yours is not.

  In "relevant" code above, use a buffer 2 x for the configuration, but still draw only 96000. I say 2 x, so that if you change your number of points of data in the future, just change one number, not the buffer too. If you should finish writing in the service Config 192 k and 96 k in playback function.

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Why my microphone does not record any sound?

  So, I try to activate the sound of material & sound-> Sound-> record, succeed in that, then try to test. And my microphone does not record anything yet (I have the latest drivers), it is a headset and it is not silent. I've reconfigured it, it didn't work.

  So I tried a new micro, it worked too.
  Can you give me an answer to what is happening and how to fix it?

  Hello

  Did you change your computer before this problem?

  Try the following steps to cross check if the microphone is correct.

  a. Click Start, type mmsys.cpl in the search box and press ENTER.

  b. in the sound dialog box, click the recording tab.

  c. click Microphone, and then click Properties.

  Note: Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.

  d. in the properties of the Microphone dialog box, click the custom tab.

  e. turn on or off the amp Microphone check box.

  f. click the levels tab adjust the slider for the volume to the desired level and then click OK.

  g. click OK to close the sound dialog box.

  See also:

  Open the troubleshooting of Audio recording

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Connect one microphone, music player or other audio device to your computer http://windows.microsoft.com/en-US/windows7/Connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Search page based on query with Table on Layershift ADF Panel does not work correctly

  Hello

  I'm on 11.1.2.4 jdev and deployed my application on glassfish 3.1.2. I've hosted this application on Layershift externally.

  I created a search page based on query ADF with table Panel. All fields of research are working fine on weblogic Server integrated and my deployment local glassfish.

  However, on Layershift, when I enter some criteria of research in certain fields, it does not record.

  UPDATE, it seems that the problem is with the fields which are of the "String" ie. Name. Fields of data type Integer and Date seems fine.

  any ideas please?

  Thank you

  kdario, you're right, ViewCriteria does not use the correct syntax for mysql for the concatenation.

  The generated sql statement looks like this.

  SELECT * FROM (select student_id, student_name, from  student) QRSLT WHERE ( ( (UPPER(student_name) LIKE UPPER('%' || 'Per' || '%') ) ) )
  

  as DB MySql does not support | (double pipe sign), its sql causing failure.

  in order to support |, mysql requires to change the sql mode setting in the file my.cnf (on linux) in the

  # Set the SQL mode to strict
  sql-mode="PIPES_AS_CONCAT,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
  

  After setting this parameter, its working fine now.

• 6 Lightroom does not start correctly

  LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.

  There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.

  The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?

  What should do? Help!

  Hi bjomb,

  You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.

  This would create a new catalog.

  check if it opens the new catalog, and it passes under the background processes in the Task Manager.

  If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.

  Kind regards

  Claes

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• Yahoo mail does not load correctly

  Yahoo mail does not appear correctly. Does not add, or graphics. I uninstalled Firefox and reinstalled the latest version and it did not help. I started Firefox Add - ons disabled and this did not help. Yahoo email is the only site to be on. Gmail opens fine with Firefox and yahoo mail opens fine in Internet Explorer. It started tonight and nothing on my computer has been changed before you start.

  Nothing of what you have suggested will be / will work. I tried all your suggestions and much more, before you find what is the problem. Yahoo mail not properly opens with Firefox, if you try to open it with Yahoo messenger open. If anyone runs into this problem, close on yahoo Messenger and open your mail with Firefox alone.

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Since Firefox updated to 23, Hotmail does not display correctly

  Firefox itself up-to-date version 23 and since Hotmail does not appear correctly. I tried in IE and Chrome, and that's fine. I tried troubleshooting suggested, but nothing has worked.

  You can try the basic steps like these in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!