"Error-printing" showing on device portable printer box

Similar Questions

• C4599, error-print wireless unable to "communicate" with the device?

  problem with the wireless C4599 printer

  sometimes wireless works, and sometimes it's not

  "solution center" shows that it is connected.

  When the work get status = "error - printing"

  "solution center" still shows as connected, but when trying to get information, such as ink level, get "the computer is unable to establish 2-way communications with the device.

  OK work when connect with usb.

  does not help to disable ZoneAlarm firewall.

  What are the good ' property settings, for example...

  ' 1. ' localization ', Ip etc.?

  2. "ports", including one for check or add?

  3 etc.

  could not find any help in the manual.

  Maybe there's another document that helps with that.

  any other suggestions for fixes?

  Thanks again for your help!
  AKM (XPproSP-3, 7 - IE, Office2003)

  I'm starting to suspect a problem with your firewall.  Is the firewall disabled Windows (do)?

  In addition, ZoneAlarm has some known issues with the HP printing software.  Learn how to set it up here.

  I would like to set a static IP address (or reserve, and IP address), but I don't think it's a source of your current problem.

• my printer shows error & or shows offline

  my printer shows error & or watch the printer is offline

  Ronald

  What error does show?

  You have the right drivers and software installed?

  You can run this fix it tool to see if it helps with your problem.

  http://support.Microsoft.com/mats/printing_problems/

• Want 5640: Error - printing queue

  My husband and I want to 5640 each. Both are connected to the network and until tonight, all two worked very well on my PC.

  To start I got the printer off-line message with mine but could still print using machine of my husband. I removed my in Device Manager but then found I couldn't add new and got the message "driver is unavailable," Although it is able to print using the machine of my husband.

  I used the HP support tool and reinstalled everything to do with my printer and it is now finally showing in device as manager being available. However, when I try to print I get a message from Windows 10 that the printer cannot print and in the queue, it shows a "print - error" message. There is no error message on the printer itself.

  The HP troubleshooter cannot find what is wrong.

  All the time I can still print using printer to my husband.

  Hey @Psycholemon,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing from your PC to 10 Windows to your desire 5640 e - all - in - one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done.

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. On your PC to your type of search bar in printers and open devices and printers.
  5. Right-click on any icon of your printer or husband listed.
  6. Click on remove the instrument.
  7. Repeat for all other listed icons.
  8. Click Add printer, and follow the prompts to add a queue for your printer.
  9. Click Add printer, and follow the prompts to add a queue to printer of your husband.

  Please let me know the results after following the above. If you are able to print on your printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Adobe PDF error - printing

  I use Adobe Acrobat 8 on a Vista Ultimate PC.

  When I print a document in PDF format, the box of the printer has the followiung inside:

  Status: Error - printing

  It shows that it prints to COM1. Should I change?

  See attachment

  I can't confirm exactly the settings of Vista. But it is the port under XP settings.

  This is fort Acrobat 9, but I guess that Acrobat 8 should be similar.

• HP Officejet Pro 8630: Test Print "error - printing".

  Hello

  I have problems printing in the main printer in my office, the HP Officejet Pro 8630. Some work colleagues print to this printer without problem, and others have gave up on it as well. I have no printing problem with HP Officejet Pro 8600 to an office close to home.

  I have finally connected to this printer manually, using its IP address, because it does not appear in the search "add a printer". When I try to do a test print, in the print queue of the printer window, it shows its status as 'Impression' for a brief moment before changing to "error - printing".

  Honestly I don't know what else to do without disturbing the few people who are successfully using this printer. I hate my work colleague whenever I need to use their printer bug.

  Hi @klewald,

  I want to help you with printing problems you encounter. I understand that you can not print, but your colleagues can. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When address us the issue, I would you kindly mark the appropriate post as accept as Solution so that others have the same or similar problem can find what worked for you.

  In my opinion, the best approach is to start to run printing HP and doctor Scan because if it does not solve the problem, he could at least help to identify the root cause and point us in the right direction.

  Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Error: "printer does not" (105-100003)

  Original title: PRINTING from MY COMPUTER

  I INSTALLED A NEW KODAK PRINTER. HAD THEWIFI TO WORK, BUT IT WON'T PRINT FROM MY COMPUTER.

  I GET THE ERROR CODE:

  Error: "printer does not" (105-100003)

  WHAT I will DO, I DONOT UNDERSTAND DIRECTIONS

  Help me

  Kodak solution - error: "printer does not" (105-100003):
  http://support.en.kodak.co.UK/app/answers/detail/A_ID/37708/selected/true

  Try the printer Troubleshooter

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Solve printer problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• "Error - printing LaserJet" 2100 TN

  This printer is an office where it worked fine via ethernet.

  It is not configured / has an anti-theft system so that in can only work in the office, right?

  My OS is windows 7 ultimate 64-bit.

  The printer prints on the page of configuration with IP etc. I was able to print the pages of another printer that is connected to the same router as my computer correctly (and 2100 TN is now). There is nothing wrong with either ethernet cable.

  I followed
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02850101&lang=en&cc=us&taskI...
   
  and installed PCL5, all seemed well until the test page, which was not being printed. If I try to print nothing happened Word Pad either. In looking at windows printer dialog box displays "error - printing". Even with PCL6, and if the choice of windows update to install the drivers in the Add Printer Wizard.
   
  If attempting to add it as a new product I get now dialog box saying "additional information required:
   
  http://gyazo.com/25ab5cf9ca0ea45ed900ae7b5e284d15
   
  restarted the printer. in wordpad status says ready. still does not work.

  HP Instant Support - Driver Check
  HP Instant Support - check pilot detected the following: connected printer: HP LaserJet 2100 Series PCL 5Operating system: Windows 2000Connection Port: 10.17.30.11_1
  Results: Cannot determine the status of your printer driver.

  Dear Sir, it seems you are the only one not to provide good information.

  Through google, I discovered that the way to reset the cold of this particular model is the JOB CANCEL button, not the wholesale/GO BUTTON.

  http://www.printertechs.com/printer-troubleshooting/cold-reset-instructions-HP-laserjets

  Once I did that I got a new IP address with my routers standrad format and I just now correctly printed the test page.

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• Why is there no option 'print Fames' in my printing box. Using Firefox 32.0.3

  Why my printing box does not display the options Print framework? They are not at all. I use Firefox 32.0.3 which I believe is the latest version.

  It used to be there all the time, but in the course of these latest images of print disappeared from this box 'dialogue native printing' when the page is not frames. Probably coincided with one of the many HTML5 features that have been added or twisted.

  obsolete in HTML5 - http://www.w3.org/TR/html5/obsolete.html#frames

• Error printer mechanism: the print cartridge cradle cannot move

  HP Officejet Pro 8500 has 910g

  The printer will not print: the message is: error printer mechanism: the print cartridge cradle cannot move.  Without the cradle of the cartridge and press ok.

  How free the cradle of the cartridge?  I sent a message to 13:30 and I got a notice that they will contact me within the hour, he is now almost 19:00 and nobody sent me back.  Help

  Try the steps in this troubleshooting page.

• mechanism error print cartridge cannot move. C3180 all in one

  It will not be printed.  I got this error

  mechanism error print cartridge cannot move.  Turn the printer off.  Free cradle of cartridge.  I checked the cradle.  He moves very well.  The only way I can get the red light to go on top of the computer is to disconnect the two cords for 30 seconds and reconnect.

  I've uninstalled and reinstalled the software from the disc that came with it.

  In desperation, I tried anything that might help - checked for paper jams, changed two inks, processed on.  Restarted the computer.   A prayed and begged for it to print.  Nothing has worked.  My computer was purchased in 2007.   Maybe it of just old and has mechanical problems.  I don't have the time to go printer hunting this weekend and want to print something today.

  If anyone has any suggestions I would be very happy.

  Thank you.

  Reset the printer - turn off, remove power from the back of the printer (not the wall), wait 5 minutes, plug back in and turn on.

  Indeed, it may be stuck and dead, but it's really the only thing you can do to get it back.

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• Error: "error-printing" when tried to print to the HP Laserjet Printer

  Original title: HP Laserjet 6 p uninstalled then re-installed but does not work

  HP Laserjet 6 p would not print envelopes correctly so I not unhooked printer.  Re-installed but now ot does not at all.  I tried the printer on Win98 computer and it works fine.  Went back to Vista machine but only the message "error-printing" get under control panel.  Any ideas?

  Hi Bobster123,

  We recommend that you run the Printing Troubleshooter and check if the problem persists.
  a. see solving printer problems
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check if the problem persists.

  You can also post your query HP printer forums for further assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.