Backup to the backup process mode two-step SAN vs NBD?

Similar Questions

• How the process in two steps of authentication does not work if you are not in an area of cellular service

  Outside cellular service areas, IS those who know how the two step aunthicatuon process works in an iPhone 6, using the operating system iOS 9.3.4?  Would a being completely locked out of their iphone and apple services until they could find themselves in a cell service area? Or can it be accessed by a public wifi? Who beg to differ on whether or not it is beneficial to use when you travel?

  I did a little research to see if all Apple items shed light...

  See "How it works" in the Apple ID - Apple Support for two-factor authentication - a time that a device is approved, he'll never ask again unless you perform one or more of several things to "break the connection.

  If I were you, I would spend it TURNED off if you fear that one of these things could happen while you might not be able to obtain the code by SMS

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

  I'm confused as to why Apple would use two different expressions for what seems to be the same:

  • "Two -authentication"- and
  • "Two -step".

  The above two articles begin with a statement like: [underlining is unique, "BOLD" is synonymous with]

  "Two-factor authentication is just an extra layer of security of your ID Apple aiming to sure you are the only person who can access to your account, even if someone knows your password."

  «The two-step verification is an additional security feature for your Apple which designed to prevent anyone to access or use your account, same ID is they know your password.»

  Maybe someone with more experience can shed some light on your question and MY confusion?

• How to measure the time elapsed between two steps?

  Hello

  In my script, I ask the subsequences. How can I measure the time it takes each subsequence?

  Something like:

  Statement: StationGlobals.TimeElapsed = 0

  -> SOMETHING HERE TO START A COUNTER<>

  call sous-suite

  Popup: Str (TimeElapsed)

  Thanks for help

  StationGlobals.Time = Seconds()

  ... / / stuff in time

  StationGlobals.Time = Seconds() - StationGlobals.Time

  You can also view the sample report of basic step in 2012 TestStand time (you can now download an eval).

• BlackBerry Smartphones OK to install the SW Office on two computers?

  New user 9530 about 2 weeks.  The office installed on laptop - required SW I plug device, then it reset default and then reinstalled BB (two trials) previous Contact updates, etc..  Laptop is gone to the store for a few days, so tried to install the SW Office on the second computer, and he wanted me to plug unit in and redo the entire process, so I stepped back.

  All negative to the installation on the second computer?  All future conflicts if the appliance BB back and forth beween two computers over time?  Just want to be sure before that I'm going.  Thank you.

  It is perfectly does well, no problem at all.

  Download Desktop Manager here:

  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

• The hot backup process

  Hello
  
  I have a Dev on Oracle 10 g (10.2.0.3 on Solaris 8) db, for which I want to set up a simple backup process hot. My question is: for simplicity, instead of putting each tablespace in backup mode and to take it out of backup mode, can I put the entire db in backup mode and copy the data files and control and take the Pb of backup mode:
  
  -J' my intention to do so hours offline when activities are lower and db is small and there is enough space to make it so again is generated (compared to each tablespace in backup mode) that this is acceptable. Thus, the following process is valid:
  
  (1) connecting to the db as sys
  (2) alter database begin backup
  (3) copy all of the files and control the db for the backup
  (4) change the backup of the end
  - or after it is necessary to issue the - modify the statement of system switch logfile also? -If so, what is the purpose of this statement?
  
  Also another question is: I don't have enough space on the db server hosting backups so after you put the db in backup mode, I transfer the file in Microsoft windows server for solaris. -Is possible with rman?
  The reason why I go to managed user backup, of rman is that we do not store the backup on the db Server nor we have any tape, but we have a windows machine that can be used to store backups. so in this case, is it possible that rman can be used?
  
  Thank you very much
  Cedric

  When you use RMAN, you don't have to put a tablespace (or database) in BACKUP Mode.

  With RMAN, you can create of BACKUPSETs, in this case, backups can be smaller than the actual database files as RMAN does not save the blocks that have never been used (that is to say, the blocks above the last measure in a data file). In addition, you can create AS COMPRESS in order to introduce more compression.
  Alternatively, you can creat backup as Copy, in which case backups are the same size as the data files that you might have with scripted backups (UserManaged).

  You MUST run your database in ArchiveLog mode.
  You MUST save each ArchiveLog.
  You must save your controlfiles as backup controlfile separate. However, even if you do not configure CONTROLFILE AUTOBACKUP ON, whenever you back up the SYSTEM Tablespace (that I advice every day), the controlfile is going to get backed up in the same backup set. For added convenience, I prefer controlfiles backup as separate backups so that they save files are easily identifiable.

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• what it means when your computer say-"your disc is a failure, start the backup process."?

  What it means exactly when your computer say-"your disc is a failure, start the backup process."? I know that's not good, but what is it? And that's something that I can fix with some instruction? Thank you, Brandi

  Hello

  If the message is correct, your hard drive is defective and must be replaced

  Your hard drive contains the operating system and all your files, photos, music, etc.

  Back up your data:

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be sure that the shrunk backup file contains everything what he

  I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be confident that the shrunken backup file contains everything it should?

  Lightroom CC 2015 to zip the backup catalog file, it should be much smaller. So, based on what you said, I see no evidence that something has gone wrong.

• I did the security two-step for iPad.  Apple support is a restoration that took it back to factory default.  Now I have nothing in iCloud I can find, photos, notes etc.what can I do to get back them.  They are still on my iPhone 5 s

  I have an Air of iPad and iPhone 5 s.  I did the two-step verification and wrote the secret code 4 digit.  I couldn't get into my iPad.  Talked to about 4 Apple technicians.  They guided me to restore my iPad to factory default.  My photos and notes and videos have disappeared.  They are still on my phone.  I never went to iCloud to see hat is here.  My iPad has said there is nothing in the iCloud shouldn't the same thing that is on my phone.  I went to Verizon and they said it was a problem for apple.  Help!

  You need start the game up more so that we can see if you have a backup, you can restore from. Go to settings > general > reset > erase all content and settings so that you get the Hello screen. Then, you configure the iPad, sign your iCloud account and when asked if you want to restore from a backup to say Yes and see what is listed to choose from for restoration.

  After the back if you don't see any options for restoring your backup.

  See you soon,.

  GB

• How to add a trusted device to the two-step verification

  I have setup two-step verification on my Apple ID and there two numbers in place for audits.

  I recently added an iPad to our devices and also restored two iPhones.

  During the installation process, I was able to add these devices secure, so they now get verification numbers sent outside the SMS system.

  Is there a way to add my MacBook Pro as a trusted device too? Currently, I can't get checks him via transfer of text from my iPhone if I send the check to one of the original phone numbers.

  Do the Web to manage Apple ID site:

  https://appleid.Apple.com/account/manage

  Operating instructions here:

  http://www.idownloadblog.com/2015/10/23/Add-remove-trusted-devices-Apple-ID-two-Facteur of authentication.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• Windows 8 slow down browsing, explore everything slow, slow - Solution involves (defective)? Microsoft Windows backup process?

  I have a new PC of Windows 8 with all the OS updates carried out.  It was not long before the loading of the page on Internet Explorer took a minute (with messages frequent that the page was not answer and I wanted to get the Web page).  The same was true for the launch of Windows Explorer to browse the folders on the computer.  A quick look at the Device Manager revealed that the internal memory use was about 37% always, who initially does not sound an alarm for me (but it must be, I guess!).  Meanwhile, there was nothing wrong with my broadband access - Ookla was speedtesting to almost 20 Mbps.  I searched the web for answers - using search terms such as "fast and slow navigation broadband ' and permutations on this subject.  There were a lot of hits - a lot of people have had this problem, but there is that none of the solutions proposed who worked for one of these people who ask the question (and solutions did not work for me - a commune was ' stop using IE - use Chrome instead! ")  This has no effect).  Norton Internet Security, Spybot, and MalwareBytes found no problem.

  Finally, I took another look at Device Manager and reinforced with all the running processes.  I noticed a strange thing - a process called "Microsoft Windows Backup" was running - and it was in the list of processes about 8 times.  Some iterations were using up to 20% of available memory - others used none.  I went through and started to kill these processes.  At first, I just couldn't do enough quickly - they would reopen not almost as soon as I closed the.  Finally, with lots of quick click, I killed all and none reopened.  I went back to Internet Explorer - and found blazing fast page loading.  My Windows Explorer was also back to normal - I was browsing directories at a good pace.

  So the question is...  WHY 'Microsoft Windows Backup' ran several times in Device Manager?  Is it really 'Microsoft Windows Backup' or some malware masquerading as such?  And if there is a problem with a backup context process, how can I make sure it is disabled and remains disabled?

  Thank you!

  1 way of working!

  Historical files was already off, I had several instances of "Microsoft Windows backup" processes running and one of them would be 30 or 40 percent (he jumped of a process to another).

  What is the process and why did start? (or was it always ongoing enforcement & suddenly become a CPU hog?)

• How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

  For Apple ID - Apple Support two-factor authentication

  You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support

• Do not receive codes of two-step verification through the find my iPhone

  Hi all. When you try to connect to my Apple ID with two-step verification, I never seem to receive codes to check on my iPhone or iPad when I choose to sent them by find my iPhone (as opposed to SMS). Everyone knows this? My iDevices work very well with Find My iPhone otherwise...

  Initial configurations for these devices worked properly?

  Have you tried to delete in the section security @ appleid.apple.com and re - check their?

• How to reset the two-step verification code that is sent to the old phone number.

  I just upgraded to 10.11.4 El Capitan. I want to use the two-step verification code, but the activation code is sent to an old number attached to my apple id I got an online connection and was able to disable the two-step verification for now. I went to the 'manage account' to find where to update the telephone number verified that texting will. I don't see where this information is to change. A phone number is not listed in my section of the security of my account. Where can I find this information out of date to update?

  Thank you, Janet D

  Try this site as well as the apple id site:

  https://supportprofile.Apple.com/

  https://appleid.Apple.com/account/manage

• How to perform the two steps in parallel?

  I have always used the sequential execution, but now a situation that two steps must be performed in parallel (one step sends data to a device and another step cut the power to the unit with a delay).

  How it can be implemented in TestStand?

  I have attached a simple example in TS 4.1.1.

  Essentially to put one of the steps that will make an operation in a sous-suite call this sequence in a new thread.  Step settings you will see the execution of appeal Options in the sequence.  Use the new Thread!

  Hope this helps,