backup Windows used on xp family - need to locate the .dbx files to restore

Similar Questions

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• I forgot to backup Outlook Express! However, the .dbx files are all in the data folder of Application that I have back up! How can I see what is in them to import to my chosen e-mail program?

  Original title: .dbx files

  I've updated computer laptop of my client from Windows XP to 7.  I forgot to backup Outlook Express!  However, the .dbx files are all in the data folder of Application that I have back up!  How can I see what is in them to import to my chosen e-mail program?

  This is how you would normally import into Windows Live Mail. If all goes well it will give you enough of a jump start.
   
   
   
  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail.
   
  
  WLMail 2011/2012: folder button. Import Messages. Microsoft Outlook Express 6, and the point where it was saved.
   
   
  
   
   
   
   
   
   
   
   

• I need to remove the program files o to send to:

  original title:?

  I need to remove the program files o to send to:

  I need to remove the program files o to send to:

  You want to remove entries from the right-click send to menu?

  If so, click on the round of Windows (start), type shell: sendto and hit enter. To remove a shortcut, right-click and choose Remove.

• When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  Please follow it mentioned below as follows:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 reset the hosts - IP addresses redirected file may prevent you to complete the authorization process.

  • Run the host file fix in the cleaning CC tool.
  • Reset the file hosts manually.

  4 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  5 - raise the cloud creative app and connect

  Let us know if that helps.

• I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week

  I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week, my picture exports are still about 600 kbs. Not printable! I'm signed and registered. Whats happening?

  Looks like you have been in the library module and chose with a preset export or export to email. Whatever it is, your Presets 'export' were to reduce the size of the image exported to about 600 k.

  In Lightroom, the library module and under the file menu, simply select the Word Export. Who will open another dialog box. GO through each option in this dialog box to choose where you want to export the file, what color space to use, what name to give to each folder, what metadata to include and do not forget to select the export size! I included a few screenshots for your reference.

  If you export exactly the same path several times, you can create your own export preset to make this process faster.

  

• Adobe first is not recognize my I need to edit the flv files.

  Adobe first is not recognize my I need to edit the flv files. Flv files are not an Adobe creation?

  This should be fixed!

  What I can do in the interem... and no, I DON'T want to convert the files to another format.

  Welcome to the forum.

  What PrPro version do you use?

  FLV Import support has been removed from PrPro recently - * think * it was with on the second update to CS6, but others can check the exact time it was deleted.

  Good luck

  Hunt

• Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

  Version: 11.2.0.3 Linux
  
  Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE
  
  ALTER database open resetlogs upgraded;         error to throw
  
  So, I thought to use it to indicate the new location of the data files to restore.
  
  That's what I did
  ===================
  
  Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration

  $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of set command at 07/26/2012 04:40:43
  RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format
  
  Recovery Manager complete.

  Don't know how it worked for Levi without %f or %U. So, I added %f
  

   $ vi restore.txt
   $ cat restore.txt
  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
   restore database  ;
   }
  
  
   $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  
  Starting restore at 26-JUL-12
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  channel ORA_DISK_1: starting datafile backup set restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
  channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
  channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
  channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
  channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
  channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
  channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
  channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
  channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
  channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
  channel ORA_DISK_1: restored backup piece 1
  channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
  Finished restore at 26-JUL-12
  
  Recovery Manager complete.

  As you can see, RMAN restore data files to the desired location. But the data file names ended up as

  1
  2
  3
  .
  .      
  .
  9

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------
  
  
  So I had to rename each file as below
  

  $ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
  $ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
  $ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf

  I would have been better in execution of the order for each data below file

  SET NEWNAME FOR DATAFILE

  Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

  Martin;

  On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

  You use %f

  %b
  
  Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.
  
  %f
  
  Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.
  
  %U
  
  Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.
  

  Source - E10643-01

  Backup and recovery reference

  http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

  I see CKPT and I agree on that!

  Best regards

  mseberg

• I need to locate the file one by one?

  Normally, I put the iTunes media files on my external drive. But recently, it connects more.

  When I try to recreate a link to it, all the music in my iTunes shows "!" and cannot be read. I need to locate the file one by one to make them available again?

  There are more than 2,000 + music in my playlist. Are there other ways to locate the whole folder at the same time?

  Thank you very much

  It should connect if he did in the past. is it possible that you renamed the drive or folder in the path to the iTunes media.  This, ny the way, is one of the reasons why we suggest to keep a whole library on an external media player only.

  If you find an iTunes file should offer to find others as long have you let iTunes organize media in the past.  If this does not work then probably something got renamed on the disc.

• We used to have an account to edit the Pdf files to word. How can we do that in this new version?

  We used to have an account to edit the Pdf files to word. How can we do that in this new version?

  Hi lonew96262075,

  Make sure you have Acrobat Reader DC Acrobat Reader DC Learn & Support installed to use the service to export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC.

  Kind regards
  Nicos

• Anyone know if you can use FTP, when you save, just save the selected file and not all images and cs

  Someone knows If you can use FTP, When you save , just Save the selected file and not all the images et CSS includes ...

  What?  Can you please rephrase your question in order to understand what you're asking?

  If you ask how a file on the remote site via FTP without FTPing any dependent files?  That the answer is Yes, you can do this by changing the SITE > dependent files: option in the PREFERENCES to enable the option "prompt on put/check-in."  The next time you download a file, you will be asked if you want to also download dependent files.  If you say NO and check the don't ask again option, then you will always simply load the file and not the dependents. You can change it back at any time by changing the preferences of this setting.

• Windows DVD Maker DVD I made has all the VOB files and I need my JPG files that I used to do (lost laptop hard drive)

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  ==================================
  Long message... I hope the info is useful:

  VOB (as you know) is the DVD video format.

  You can not convert video to a format of photo as
  .jpg and retrieve your original images. And...
  None... copies of original source files are not
  archived anywhere on the DVD.

  A method (and probably not near what you)
  hope) would be to make the screenshots
  (capture) video. The resolution and
  sharpness of the capture will not equal
  the originals.

  The free VLC Media Player can read your
  VOB files.

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  A possibility may be 'Solution B' in the
  next article:

  "Excerpt from photographs of wedding DVD videos.
  for printing.
  http://labnol.blogspot.com/2007/02/extract-still-photographs-from-wedding.html

  Word to the wise... If you use a software that will
  extract frames from the video... be aware that thousands
  photos can be made and you can fill in all
  your free space until you realize.

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.