EliteBook 8470p: Elitebook 8470p and the wireless module

Similar Questions

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• Problems with the sound button and the wireless button

  I have a computer laptop dv6-2155dx, and he has a problem with the sound, the button bar button and the wireless button, all of them continue to work, I do not know if I made a mistake and let them turn off or there is another way to get available.

  I need some advice.

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.

  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.

  3 reconnect the power adapter (do not connect the battery), press the power button

  Verification is your problem is resolved or not.

• EliteBook 8460p: WWAN Sierra Wireless Module

  Hello

  Can anyone give me the link for update my drivers of WWAN Module HP un2430 for 64-bit Windows 10 platform or the update isn't out yet... If Yes, then pretty close when it comes out? The reason why I asked this question is because my module drivers Windows 8.1 is not compatible with Windows 10 so the wireless with no signal, so does not work.

  I've used Windows 8.1 64-bit but am now on Windows 10 64-bit for my EliteBook 8460p. The module hp un2430 worked perfectly when I used Windows 8.1.

  Finally, on the other hand if there is a patch that is useful to let the thing working please let know me.

  Thank you, in advance for your help.

  Jamie

  Oh, I solved the problem myself... I can now connect intracellular... Detective Conan.

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• F11 key does not not in windows 7 - have the keyboard and the wireless mouse

  I had problems with my computer HP not recognize my second USB (:) drive J.  I called HP and the last thing said the tech support person had to restart and use the F11 key as soon as POSSIBLE.  I tried for 90 minutes, get the f11 key to work with absolutely no luck.  What is the wireless component which is too slow and I need a wired mouse and keyboard to "beat the clock"?  My f11 key invalid?

  There is practically no time to go into the system diagnostics no matter how long my fingers type.

  Well, honestly I don't know why he asked you to press F11, is perhaps just a key that will work for HP computers.

  Most computer manufacturers use generally:
  -F2 to access the BIOS Setup
  -F10 - F8 to access the list of available boot devices. Example CD, hard drive, USB etc.
  -F8 is for menu of boot loader Windows, where you can choose to start mode without failure, mode safe mode with networking, safe mode with command prompt... etc.
  -Check if you have a KEY named F-Lock on your keyboard.
  -During the reboot, press Caps Lock funct - and then try pressing F11.
  Sometimes this worked for me, in my case, I have a MS ergonomic keyboard which contains an F-Lock to enable and disable F keys.
  I hope that this help, my apologies for not having more information.

• ENVY 14-1190ea and the wireless installation

  I installed Windows 7 Pro x 64, and unfortunately I wasn't able to get the driver installed wireless lan.

  I downloaded and installed all necessary drivers on this page and is stuck with 2 damage which are the wireless adapter.

  The laptop is ENVY 14-1190ea.

  The hardware IDS that are not installed are:

  Network controller:
  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C & REV_01
  PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C
  PCI\VEN_14E4 & DEV_4353 & CC_028000
  PCI\VEN_14E4 & DEV_4353 & CC_0280

  Unknown device:
  ACPI\HPQ0004
  * HPQ0004

  Advice me please how can I find and install the correct drivers.

  Hello:

  Try the quicklaunch for the ACPI0004 software:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95237-1&LC=en&DLC=en&CC=US&OS=4063&Product=4313929&sw_lang=

  You are away from your wireless adapter: Broadcom 4313:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-90955-1&mode=4&IDX=1

  If the quicklaunch EHF software do not get rid of ACPI, try the HP Protectsmart driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-76187-1&prodTypeId=321957&prodSeriesId=3688868

  Paul

• Presario R3000 (R3200?) and the wireless USB mouse

  I have a Presario R3000 (or, perhaps, R3200) bought at Office Depot ages ago...

  Also, for centuries, I used a mouse Microsoft usb/wireless.  This mouse is connected through a hub USB of TrendNet.

  Suddenly, a few days ago the mouse is not responding.

  I tried to uninstall/reinstall the drivers, peripheral and even tried a BIOS flash, nothing helps.

  Here's what's weird:

  (1) a WIRED USB mouse will work, without any problem, in the same usb ports that the Wireless does NOT work in (I try all 3 ports of the laptop and those on the hub, in all of this).

  (2) the mouse (and the replacement, I bought, thinking that my mouse is dead) appear correctly in Device Manager - they just do not respond to the movement.

  What is a USB problem?  A power USB problem?  A Windows XP (pro, R2) problem?  A motherboard problem?

  I have no idea where to continue troubleshooting...

  Thank you

  EM

  It may be a stupid question but... you did not put fresh batteries in the mouse, have you tried new batteries?

• HP computer laptop 15-afl54sa: network card for computer HP laptop and the wireless adapter drivers

  Hello

  My name is Andrew and I currently installed the operating system windows 7 on my HP laptop. However, I'm unable to connect to internet via cable and wifi network. I have included all of the hardware ID and my computer laptop make and model below.  Is it not possible for a technician to send me the links required for these special as soon as POSSIBLE drivers. Thank you very much.

  15 - afl54sa
  
  Laptop
  
  [Personal information]
  
  N7J75EA #ABU

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C & REV_07
  
  
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80CB103C
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_020000
  
  
  
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  
  
  
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  
  PCI\VEN_14E4 & DEV_4365 & CC_0280
  
  
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  
  
  
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  
  PCI\VEN_1022 & DEV_1537 & CC_108000
  
  PCI\VEN_1022 & DEV_1537 & CC_1080
  
  
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C & REV_42
  
  PCI\VEN_1022 & DEV_780B & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  
  PCI\VEN_1022 & DEV_780B & CC_0C05
  
  
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C & REV_11
  
  PCI\VEN_1022 & DEV_7814 & SUBSYS_80CB103C
  
  PCI\VEN_1022 & DEV_7814 & CC_0C0330
  
  PCI\VEN_1022 & DEV_7814 & CC_0C03
  
  
  
  ACPI\SMB0001
  
  * SMB0001
  
  
  
  ACPI\MSFT0101
  
  * MSFT0101

  Hello:

  It is a model that is difficult to install W7 on.

  See if these drivers work...

  PCI\VEN_1022 & DEV_780B install this driver first and then restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  PCI\VEN_1022 & DEV_7814 installation of these drivers and reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058#tab1

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_150879_1

  PCI\VEN_10EC & DEV_8136:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_148639_1&swEnvOid=4063

  PCI\VEN_14E4 & DEV_4365:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_151873_1&swEnvOid=4063

  You will also need driver bluetooth for this card template...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155436_1

  PCI\VEN_1022 & DEV_1537: This driver may need to be manually installed.

  Download and run this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_153451_1

  If it does not automatically install unit above, go to Device Manager and click the controller PCI E/D who need driver.  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp72675.   Make sure that the include subfolders is selected and the driver should install.  Then restart.

  ACPI\SMB000:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609962&swItemId=ob_154783_1&swEnvOid=4063

  ACPI\MSFT0101: There is no W7 drivers for this device because it is only used for certain security features that can't be find in W8.1 and W10.  W8.1 and W10 were the drivers for this device included with the operating system.

  Some books of class cases may have a BIOS setting to disable this security feature, but I doubt that yours is.

  No no not this installed device will have no negative impact on your PC.

• "The service cannot accept control at this moment a message" and the wireless Wlan card stopped working

  My computer is showing a wireless card WLAN stopped and on numerous programs, including the firewall and security, as well as other system error "the service cannot accept a message of control at the moment."  I even tried downloading new spyware thinking that something was inside my computer but cannot download anything.  What can I do?

  Hi irishswede,

  Thank you for visiting the Microsoft Windows Vista Community.  Here are the steps that include the error message you stated in your troubleshooting post.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a new laptop and the Wireless does not work as it should.

  You can have a new laptop with Windows 8 and are having some problems with wireless, but no other system with Windows 7 or more, there is a problem.

  At first glance, this seems to indicate something wrong with the all-new Windows laptop, 8.

  Before making a lot of changes and going through troubleshooting, make sure that the firmware of the router is up-to-date.

  Similar problems occurred when Windows Vista and 7 have been released and most of the large router manufacturer had a firmware update this rememedied a lot of questions.

  Just something to keep in mind is updated updated the firmware of the router because it is not clear that he could be at fault.

  I hope this information helps.

• Firefox 5 and the Firebug module

  The Firebug add-on does not work for Firefox 5 stable at present.

  Note that Firefox is supposed to be 'rapid development', up to version 7 - for the best or the worst for its modules - in order to keep in touch with this is advisable.

  We have presented a new version of BrowserLab for Firebug for Mozilla and not expect to talk live on their site every day. More on that in a blog recent post on the Blog of the BrowserLab team: e http://blogs.adobe.com/browserlab/2011/06/28/browserlab-for-firebug-and-firefox-5-incompat /

  Bruce

  Bruce Bowman

  Product Manager BrowserLab

• What wireless router and the wireless network card can I use with my Satellite 1800?

  TOSHIBA SATELLITE 1800-314
  I NEED TO KNOW WHAT WIRELESS ROUTER SHOULD I BUY AND PC CARD I SHOULD BUY.
  MY CD/DVD ROOM DOES NOT READ DVD. Thank you.

  Router is not relevant at all. You can use what you want. Interesting is what WLAN card on your device is installed.