Backward compatibility for Weblogic server 12 c

Similar Questions

• Custom for Weblogic Server identity Asserter

  I created a Custom Identity Asserter for Weblogic Server, but when I try to access it from my cleint, I get an error of 401 - not authorized
  even when I send a valid token. The token is encoded in Base64 as marked in the created security provider.
  
  Can someone help me on this.
  
  -Raj

  allow me to mail and debug log file SecurityATN

  [email protected]

• How do I know the admin for weblogic server port

  I have Oracle Weblogic server installed on my Windows 7 machine. I want to know if the server is running and which is the port of admin for him. Can someone guide me?

  the default is 7001. If the weblogic administration console is accessible by http://localhost:7001 / console

  If weblogic is installed you will have weblogic home i.e. middleware... you can check that... These are all default values and can change according to the approx... but usually these things by default.

• Necessary assistance to the configuration for weblogic server 11g

  Dear all,

  My Version of the OS is:

  [oracle@wbctaxapp1 wlserver_10.3] $ cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.2 (Santiago)

  Linux wbctaxapp1 2.6.32 - 220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux

  WebLogic Server is 11g

  ---------------------------------

  Installation directory is:

  [oracle@wbctaxapp1 wlserver_10.3] $ pwd

  /Home/app/Oracle/middleware/wlserver_10.3

  [oracle@wbctaxapp1 wlserver_10.3] $

  Please help me to configure the following settings... Thanks in advance...

  Archived real path setting	Enable
  WebLogic plug-in	Enable
  Properties of Node Manager	Must be true for the start
  Environmental variables	MW_HOME, WL_HOME must be set to the profile
  Entries for the crontab Manager node	Starting the Manager node in the crontab.
  Data sources	Data sources will be created after the migration of the DB

  Thanks and greetings

  Yvon Das

  Solved

• Question about steps for Weblogic Server 8.1 to 10.3 Upgrade

  Hello!
  
  We have upgraded our server Weblogic 8.1 to 10.3. Could someone advise me:
  
  1. how to upgrade the Weblogic 8.1 to 10.3 Server? The Weblogic Server 10.3 can coexist in a single physical server with Weblogic Server 8.1?
  
  2. when the software upgrade can be downloaded?
  
  3. we have a web service running under Weblogic Workshop, Weblogic Server is started through the workshop. This web service can be run in Weblogic Server 10.3?
  
  4. are there predictable questions/problems that will happen?
  
  Please kindly help me. Thank you very much.
  
  Best regards
  May

  Download location: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
  You can upgrade the domain after you install wls 10.3 using quick start.
  When we migrated, we went from windows to linux. We have installed, created the field, servers managed, configured, etc from scratch. We have no problems "show-stopper".

• 8.3 tested SP1 configuration JDK for WebLogic Server (application server)

  The base 8.3 had JRockit JDK Sun JDK as well as a tested configuration.

  More late 8.3 SP1 counts Sun JDK as a tested configuration.

  Can someone comment on that. If I decide to deploy SP1 with the latest available patch just 8.3 use Sun's JDK tested for the application server?

  JRockit JDK is supported with P6 EPPM 8.3 SP1 and latest fix. The tested configuration for SP1 and above is an indication that additional certification of the last JDK was made. This does not necessarily mean that you have to upgrade to it, well recommended. Review the SP1 patch readme for more information.

• Services for SQL Server 2008 Express are not listed. No error message when installing.

  Hello community,

  I installed SQL Server Express 2008 (without SP but with SQL Management Studio) on a Windows XP 2002 SP3 32-bit. Used to install operating system user is a member of the administrator group
  The SQLManagementStudio_x86_ENU.exe installation file was downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=7593 . Express Edition has been selected during the installation. All prior checks have been adopted (with the exception of 1 and 2 does not apply). I chose this version with management tools that I will need them for a quick change at a later stage.

  Then I installed on SQLServer2008SP1-KB968369 - x 86 - ENU.exe, which is the general Service Pack 1 for SQL Server 2008, which has been downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=20302. All prior checks have been adopted (with the exception of 1 and 2 does not apply). The installation window title was SQL Server Service Pack 1. In the step select the components, I had no other choice than the selection of shared components / basic management tools. To the right of the screen, it says "Express with Advanced Services" edition / Patch level: 10.0.1600.22

  It ended with a message saying that your SQL Server 2008 upgrade completed successfully. The information contained in the mentioned log at the end of the installation displays no error message.

  Here is the troubled part

  Then I tried to install a different SW that has SQL Server 2008 SP1 as a sine qua non. What he did not. Then I rebooted and wanted to see what version was indeed installed.

  Control Panel - Add/Remove software : 5 entries, Microsoft SQL Server 2005 backward compatibility / Microsoft SQL Server 2008 / Microsoft SQL Server 2008 Native Client / Microsoft SQL Server 2008 political / setup of Microsoft SQL Server 2008 supports files (no mention of SP1, can this be correct?)
  Control Panel - Services : there is no service of any kind that has SQL Server on its behalf. This is very probably a major problem, a google for that advice that there should be more of them
  Regedit - HKLM - SW-MS - MS SQL Server - 100 - Bootstrap Release - current Version : 10.1.2531.0 (Diffferent than SP1, think?)
  Cmd - osql-u its Pei : named pipes provider: could not open a connection to SQL Server [2]. / Login timeout expired

  I reboot several times since then.
  I don't know the status of the installation before installing the SP1, I knew I'd need SP1 anyway.

  I suppose that services SQL Server issue resolved would be a big step forward.

  Anyone has an idea on what I could check?

  Thanks in advance, Laurent

  SUPPORT IS LOCATED IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Administration server and the servers managed (WebLogic Server).

  Hello

  What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,

  but I don't know what they are?

  
  

  I saw them while I was reading on the Node manager that allows me to start the above mentioned.

  
  

  -J' installs the WebLogic to develop applications with oracle reports and forms services.

  
  

  1 - do I need a node Manager, Administration Server or managed servers?

  
  

  2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?

  
  

  Thank you very much

  Answers to most of your questions WLS lie in WLS documentation:

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm

  However, a simple answer to your questions could be summed up as follows.

  If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing.  In the context of WLS, a managed server is responsible for hosting java applications on the server side.  For example, Oracle Forms Servlet.  The WLS management server is actually a java application deployed on a managed server.  So, really, the "Admin" server is a kind of "Managed Server".  In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:

  • Server Admin
  • WLS_FORMS
  • WLS_REPORTS

  Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.

  http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm

  Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet.  However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).

  All these components are much more complex than what I've described here.  I would recommend to consider the documentation if you are interested in learning about them.  That said, the best way to really learn about them likely will be to install the product and start using it.

• Proposal Setup infrastructure - Oracle database, LDAP, Weblogic Server, part operational

  Hello Experts!

  First of all, until I opened this topic I tried to search for similar positions that can hold at least part of the necessary information for me. This topic is that most related to the architecture of the whole system in the sense of the application that contains a part of database (oracle with data models database), the operational part (unix scripts called from the web interface), weblogic server where MS Java application runs and the last part is LDAP Setup for supported LDAP grups.

  Currently confirmed architecture is for me unacceptable from the point of view of dorsal because everything would be installed on the same physical server (physical machine). From my point of view, there should be at least 3 physical separate servers:

  (1) Server database where the Oracle database is installed (say ommit backup and disaster at this stage recovery)

  (2) operation of servers shared between several applications to manage operational tasks and application configurations

  (3) separate server for Weblogic server, the LDAP server and Java application is

  Given that 2 points are obvious to me and I provided them with really simplified form then 3. is not entirely clear to me mainly due to the fact that I am the architect of solution for datawarehausing, not for applications based on J2EE.  Under the following link:

  webloic Oracle server needs a server infrastructure

  I just read to support failover and balancing I should have two different boxes physical and Weblogic software installed on each of them. I know not so so many separate for the 3rd point above mentioned how boxes I need. I would appreciate if you can share your thoughts on this subject by considering the following points:

  -scalability (1000 users at the same time)

  -further development

  -maintenance

  -installation costs

  If you can guide also links to cover this topic, I'd be more than happy

  Thanks in advance!

  Kind regards

  Bolo

  
  

  Hi Bolo

  Here's WDM of Oracle Identity management includes the installation of OID:

  Content

  I'm sorry for the confusion.

  I meant "General guidelines of architecture of say that you should keep the boxes", for example: LDAP must be in another box of WLS, also database must be in a different area, this isn't really something related to Oracle products, it is only related to the definitions of architecture.

  WebLogic Server at the end being that a java application is running in the virtual machine JAVA, WLS should run in the same box as the JVM as it comes to a unit in terms of functionality.

  Best regards

  Luz

• Install PT8.53 with Linux question: setup.sh can't recreate WebLogic Server PIA

  People,

  Hello. I install PeopleTools 8.53 with the server database Oracle 11 GR 1 material and OS Oracle Linux 5. Data Mover Bootstrap and application designer can connect to the instance of database successfully. About PIA, Oracle Database Server and Application Server Tuxedo11gR1 runs correctly. But when to start WebLogic Server in the opt/PT8.53/webserv/PT853/bin directory, I get an error message like below:

  [user@userlinux bin] $./startPIA.sh

  Its output:

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  In the direcctory /opt/PT8.53/webserv/PT853/servers/PIA/logs, I run the following command:

  [user@mylinux log] $ vi PIA_stdout.log

  Its release containing the primary error message:

  Another process is using port 80: exception java.net.BindException: Permission denied.

  The 127.0.0.1 address may be incorrect or another process is using port 443: exception java.net.BindException: Permission denied.

  Because I changed the MAX_FILE_DESCRIPTORS from 4096 to 1024 in the file 'setenv.sh', I can't start PIA on the ports lower then 1024 on Linux with a non-root users. I need to recreate PIAS and assign ports like 8000 and 4443. I have remove the PIA installed folder opt/PT8.53/webserv.  I recreate PIA in the directory /opt/PT8.53/setup/PsMpPIAInstall/ as below:

  [user@userlinux PsMpPIAInstall] $./setup.sh

  Its output:

  Select the web server root directory/home/user/oracle/Middleware

  Web server detected version: no choices available

  Error: The web server root directory entered is an invalid or incorrect version.

  Please try again. The version of the required web server is "Weblogic 10.3.

  
  My installed WebLogic directories are /home/user/oracle/Middleware/wlserver_10.3 and /home/user/oracle/Middleware/coherence_3.7 and I run WebLogic Console successfully with http://mylinux.mydomain:7001 / console. I think that the directory/home/user/oracle/Middleware is correct, but it says "no choices available".

  The first time, setup.sh runs correctly. In the second, setup.sh Gets the error above after deleting its previous /opt/PT8.53/webserv file installed.

  My question is:

  Can any folk solve the above problem to make run them "setup.sh" to recreate WebLogic PIA again assign ports greater than 1024?

  
  Thank you.

  See your original thread.

  Continue.

• Install PT8.53 Linux question: startPIA.sh cannot run the WebLogic Server

  
  People,

  Hello. I install PeopleTools 8.53 with the server database Oracle 11 GR 1 material and OS Oracle Linux 5. Data Mover Bootstrap and application designer can connect to the instance of database successfully. About PIA, Oracle Database Server and Application Server Tuxedo11gR1 runs correctly. But when to start WebLogic Server in the opt/PT8.53/webserv/PT853/bin directory, I get an error message like below:

  [user@userlinux bin] $./startPIA.sh

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  According to the site Internet of Nicolas http://gasparotto.blogspot.com/2010/02/web-server-weblogic-11gR1.html, I did 2 things like below:

  
  First of all, in the setenv.sh file, I changed MAX_FILE_DESCRIPTORS to 4096 to 1024.

  
  Secondly, I added the last 4 lines in the /etc/security/limits.conf file as below:

  # - nice - max great priority has led to increase of
  priority realtime max # - rtprio -
  #
  # < domain > < type > < item > < value >
  #

  soft #* coeur 0
  #* rss hard 10000
  #@student hard nproc 20
  #@faculty soft nproc 20
  #@faculty hard nproc 50
  #ftp hard nproc 0
  #@student - maxlogins 4

  # The following lines are added by me

  WebLogic - nofile 65536
  WebLogic - nproc 65536
  WebLogic - unlimited core
  WebLogic - memlock 50000000

  # End of file

  
  I have restart startPIA.sh and get the same error message:

  Try to start WebLogic Server PIA
  No activity will be connected to this window.
  Activity on the server will be connected to /opt/PT8.53/webserv/PT853/servers/PIA/logs/PIA_*
  PID for WebLogic Server PIA is: 5462

  
  My question is: any folk cannot resolve the error above to start the WebLogic for PIA Server?

  Thank you.

  As Nicolas says that you cannot start PIA on ports below 1024 on Linux with a non-root users.

  Recreate your PIA assembly and affect others like 8000 and 4443.

• Can not connect to App - Weblogic Server 10.3 Jdeveloper 10.1.3.5

  Hi friends,
  
  I'm trying to connect 10.1.3.5 JDeveloper to WebLogic 10.3 Server.
  
  I am facing some problems.
  
  I used JDeveloper 11 g to do the same thing and it worked.
  
  I found that JDeveloepr 10.1.3.5 isn't any Assistant for Weblogic 10.3 connection, all the available wizards are
  for the version server 10.1.X.
  
  So please tell me if it is possible to do.
  
  The reason why I'm doing this is because I can't create composite applications, that my project only works with projects of the BSE.
  
  As I am new to Oracle SOA suite, I downloaded accidentally JDeveloper 11 g and SOA Suite 11 g etc.
  
  But I found that JDEveloper 11 g cannot create projects of BSE, it can only create composite projects.
  
  So I downloaded JDeveloper 10.1.3.5. So please help me configure the IDE with the Weblogic Server I.
  
  If it is not possible, please suggest that the App Server and version of OSB should I install.
  
  Thanks in advance.
  
  Published by: user10935249 on August 27, 2011 05:11

  You use Jdeveloper 11 for WebLogic server 10.3.

  Projects of the BSE are now called mediator within a composite application. If you create the composite application and then insert a mediator object. When you open the mediator object, you get the old style 10g ESB project.

• Workshop for Weblogic 10.3.5.0

  Is there a new version of Oracle workshop out yet? The one I downloaded does not work with Weblogic 10.3.5.0. Maybe I could just the Eclipse plugin somewhere?
  
  Thank you for your help.

  Hello

  If you are looking for WebLogic Server 10.3.5 tooling in Eclipse, Oracle Enterprise Pack for Eclipse (EPCO) Please check.

  The EPCO OTN page can be found here:

  http://www.Oracle.com/technetwork/developer-tools/Eclipse/Overview/index.html

  Thank you
  Greg

• WebLogic server starts only not in several version of JDeveloper environment

  Hello
  
  I installed first Jdev 11.1.1.1 version (now works well) and then Jdeveloper 11.1.1.3(problematic maintenant) keeping Jdev 11.1.1.1 side... in windows xp, operating system.
  
  I created House of Middleware for Jdev 11.1.1.1-> D:/Oracle/Middleware1 and 11.1.1.3-> D:/Oracle/Middleware2. There is also a structure of folder C:/Oracle/Middleware that contains some files in the C: drive.
  
  From weblogic server 11.1.1.3, it displays the following error. The class for weblogic server path must be start with D: drive and not the C: drive.
  
  Please tell me how to change the class path to designate the correct weblogic server.
  
  Additional details:
  The CLASSPATH of the named environment variable has value 'D:\product\10.1.3.1\OracleAS_1\jdk\bin;D:\product\10.1.3.1\OracleAS_1\ant\bin; C:\Oracle11gDB\product\11.2.0\dbhome_1\bin;c:\Windows\System32;D:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin ".
  
  and another PATH variable has the value D:\product\10.1.3.1\OracleAS_1\MOBILE\Sdk\bin\OLITE40. CONTAINER;
  
  
  LOG FILE:
  
  
  Using the 7101 port *.
  "C:\Documents and Settings\navinkumark\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd"
  [waiting for the server to complete its initialization...]
  The system does not have the specified path.
  .
  .
  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
  .
  Start mode of WLS = development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;D:\product\10.1.3.1\OracleAS_1\MOBILE\Sdk\bin\OLITE40. JAR; _
  .
  Path=D:\product\10.1.3.1\OracleAS_1\jdk\bin;D:\product\10.1.3.1\OracleAS_1\ant\bin; C:\Oracle11gDB\product\11.2.0\dbhome_1\bin;c:\Windows\System32;D:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  WLS starting with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Ddomain.home=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\ DEFAUL ~ 1-Dcommon.components.home=C:\Oracle\MIDDLE~1\oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log= org.apache.commons.logging.impl.Jdk14Logger-Djrockit.optfile=C:\Oracle\MIDDLE~1\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.domain.config.dir=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1-Doracle.server.config.dir=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.security.jps.config=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml - Djava.protocol.handler.pkgs=oracle.mds.net.protocol - Digf.arisidbeans.carmlloc=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\ FMWCON~1\carml-Digf.arisidstack.home=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\oracle_common\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\oracle_common\modules\oracle.oamprovider_11.1.1-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\DOCUME~1\NAVINK~1\APPLIC~1\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole= weblogic. Server
  Java version "1.6.0_18.
  Java (TM) SE Runtime Environment (build 1.6.0_18 - b07)
  Java Client VM (build 16, 0 - b13, mixed mode)
  java.lang.NoClassDefFoundError: weblogic Server
  Caused by: java.lang.ClassNotFoundException: weblogic. Server
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
  The main class is not found: weblogic. Server. Program ends.
  Exception in thread "main" process is completed.
  
  
  
  Please help me,
  
  Thanks in advance...
  
  Kind regards
  Navin

  As long as you start together the two version, you should be OK (I have version 6 installed on my pc).
  I had this discussion today in this {: identifier of the thread = 2249375}.
  The solution should work for you too.

  Timo

• I can not IL2 Sturmovik for install on win7 64-bit using backwards compatibility please help program

  I tried to use the backward compat on different versions of windows and won't work troubled turned 3 times and still nothing so I came here for help.

  Hello

  You need to upgrade the version of IL2-Sturmovik, which is installed on your computer. The editor offers a paid upgrade for a
  compatible version.

  Check this link for more information:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=IL-2%20Sturmovik%3A%201946&v=Ubisoft&UID=&pf=0&PI=1&c=PC%20Gaming&SC=simulation%20%26%20Driving&OS=32-bit

  Visit this link to purchase the upgrade:

  http://www.Ubi.com/us/games/info.aspx?pid=5163

   

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.