Bad noise in the shadows in ACR

Similar Questions

• Funny blue noise appearing in the shadows during the passage to develop Module

  When you change the photos below, after having paid a graduated filter the shadows of the image turn blue, the blue color disappears when I switch back to the library module.  The blue noise does not appear when I export the image or film or the browser.

  Any ideas?

  Thanks in advance,

  Henry

  Version of Lightroom CC 2015.3 release 6.3 (Mac)

  

  That the superposition break.  Click on the white triangle in the upper left corner of the histogram to turn it off.

• Blue noise now appear in the shadows

  I am suddenly, see blue noise when opening a raw file to process and use my usual settings and adjusting with the sliders. Even the old raw files that were already processed (and then looked satisfactory) are showing blue noise, sometimes completely blowing the shadows. I don't know why this is happening. When I slip and shadows or blacks far to the right, the sound diminishes or disappears.

  Are you developing? You have turned on shadow clipping? Click on the triangle of shadow on the left side of the histogram to toggle the shadow clipping. Same thing with nails...

• HP Pavilion 15: Noise of the fan during games

  Hello world!

  I recently bought the HP Pavilion 15. All-in-all, it's good. But when I play certain video games, I hear the noise of the cooler fan. The noise is loud and a little bit of crackling. Some games cause stronger noise (progression of Tomb Raider, hand of fate), other (The Witcher III) - not so loud. The less demanding games produce almost no additional noise.

  At first, I thought it might be connected to the audiosystem, but when I use headphones noise crackling under the remains of the screen and the sound in the headphones is good.

  This problem does not prevent the game experience - games work without problem, but I don't know if it's a sign of some videoadapter damaged or simply bad. Or are all generally noisier than other pavilions portable?

  What can be the problem? What should I do?

  Fellow HP users!

  I found the solution on my own!

  I had BIOS version F0.5 and improved through this site up to F0.9. And the sounds of crackling disappeared! Everything works!

  So, if you have similar problems, just find the update for your BIOS. It is also a good opportunity to check if your drivers are up to date!

• ThinkPad T410 collapsed after that I replaced the bad srew near the fan to work!

  Hello
  my Thinkpad T410 stoped working after that opening and blow the dust out of my fan.
  by mistake I replaced the bad srew near the fan... that would be a mojor to my motherboard damage prevents it from start.
  When i replaced the battery in my laptop and kicked it... all I saw my battery I icon started flashing.

  additional information:
  whenever I press the power bottom, I hear the noise for less than a second of the hard drive started to load and then nothing.

  I would be very grateful for any help

  Note from Moderator: Edition subject to the content of the game.

  A long screw can damage the keyboard only.

• Obvious, ugly, black as pepper 'noise' in the development of image?

  

  

  My question is hard to explain other than looking at the photo above here and I was wondering, 'is this normal? Is it because of my picture or Lightroom? »

  Sometimes, when I'm editing a darker photo in the develop module, LR seems to deal with noise on the pictures differently resulting in (sometimes) really ugly black pepper like noise or patches of black color which kind of ruins the picture. If it's just my camera or photo or how I'm editing very well - the picture, I accept a bad photo and please let me know what I'm doing wrong here. But if LR treats the photo so that it focuses on the noise in the photos, I want to know how to not make again. Any help is appreciated! Thank you!

  If you blow things up to 3:1 and you have a lot of sharpness, this could easily happen.

  If you temporarily turn off sharpening and view the image at 1:1, how is it?

  Moreover, why you look at photo 3:1 anyway?

• default values for sharpness and noise in the develop Module

  Capture sharpening

  I get my head round sharpening and agree there are three distinct phases: Capture, creative and output sharpening sharpening sharpening

  Regarding the Capture sharpening, I noticed that when I import a CR2 file in Lightroom 3.6 there is a pre-set Adobe in the develop Module. Is this a form of Capture sharpening default?

  Sharpening

  Amount: 25

  RADIUS: 1.0

  Detail: 25

  Noise reduction

  Luminance: 0

  Color: 25

  Detail: 50

  Thanks, Jeff

  I got the hang of this now. The parameters are the same in ACR and LR - as I might expect that I always use the same camera - but they never vary independently of any setting ISO I can used well

  Bill

• Error of the shadow

  Problem:

  Error when trying to add a shadow to a big rectangular box in AI CS3.

  (This should therefore not be complicated, right?)

  I searched a / b two hours the dropshadow errors and I tried the following:

  copy and paste to a new document

  setting memory program

  The error does not says something specific, that is maddening. I get two separate errors.

  A moment with the help of the shadow as an EFFECT and a use as a FILTER and each are different from errors (see below)

  

  

  It is not that the placed image b/c HAVE don't make a shadow on the rectangle (72 '') in a new blank document. I get the same errors.

  It works on small objects, not great. Under the side filter, after he throws this arrow, I hit OK, it gives as an opaque black box behind the original.

  SPECIAL DESIGN: I'm trying to create salon banners (36 x 84). I placed stock photo low resolution (until the customer buy the vector image) in a large, rectangular white opaque area. I want the box to jump off the background image.

  Thought it would be fairly simple.

  Ideas? I'm not a computer guru, but can help most things when guided in one direction. Is - this memory? Is it just me aka bad user?

  Thank you.

  Reach

  Effects > effects of rasterization of the Document settings and change them to 72 dpi.

  Now, everything will be fine I think that 72 dpi for this size is more than enough, that it would probably lower as well.

  The default incidentally is 300 ppi, I think that even in CS 3

• Tecra S1: Notebook generates noise when the LCD display is on

  Tecra S1 is 4 years old and generates a high noise when the LCD is turned on (from last week). The noise comes most of the keyboard. Could this be a defunct ups?

  Is there an easy way to fix it? It's not very loud, but in a quiet that is audible.

  Hmmm I think this noise comes certainly from the FL inverter.
  But I can't tell if the inverter is faulty or not because I noticed that her top on different laptops when the brightness of the display is placed on the lower floor.

  But if you think that this problem was not present in the past, then you need to contact a technician who could help you replace the inverter FL.

  Best regards

• Qosmio F20: Bad sound using the MSN Messenger & video transmission

  Hi all

  I recently bought a laptop Qosmio F20, who is currently connected to the Internet via a router/modem WiFi Netgear (DG834v2).
  I tried to use MSN messenger v7.5 (7.5.0311 and 7.5.0324) with a webcam Creative NX () to make a video call.
  But the sound of the person I'm talking to is so distorted, it is impossible to have a conversation (I tried with several of my friends, who all have good sound on their end).
  However, if I have an audio only (no video) conversation, I have a perfect sound.
  Despite my best efforts (update drivers, reinstall messenger, windows firewall ok for messenger etc...) I've had no chance of finding the problem so far. If anyone has any suggestions I would be very grateful.

  Thanks in advance.
  François

  Hello

  You suggested that the sound working properly without the video connection.
  In my opinion, it happens because of the webcam. Maybe the software has a bad influence on the sound.
  This is not a product of Toshiba, and Toshiba is not responsible for any 3rd party device.
  I recommend you to check the site of the manufacture of cam. Maybe you will find the solution.

• Satellite L20-214 - isolate bad sectors on the HARD drive?

  Dear Sir

  My laptop fell off my table leading to serious hard drive problems. The hard drive now has some bad sectors that can be repaired with the chkdsk command. I managed to get my data on an external hard drive. Despite the bad sectors, I can reinstall it however from the recovery cd. Starting after that time consuming (1.5 hours) and after starting Windows I get the error messages from programs that cannot be started. It's the same thing after each reinstall. My guess is that the recovery disk writes data on the same spot every time both on bad sectors.

  I was wondering if theres a way to fix or even isolate bad sectors on the disk, so I can continue to use my laptop.

  Your help is very appreciated.

  Hello

  You can try HDD Regenerator 1.61 (HDD Regenerator is a unique program for regeneration of physically damaged hard disk drives. It does not hide bad sectors, it really restores them).
  However, the best way is to buy a new hard drive :)

• Satellite P10-304: bad sectors on the disk - how to fix?

  My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this?

  My model is a P10-304.

  In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, does anyone know how to bypass or disable round trip

  Hello

  I found these tips how to disable the Norto Go Back tool.
  You can uninstall it from your computer, disable GoBack to your laptop press 'space' GoBack screen button and select the option "disable" GoBack.

  Follow these steps:
  1. reboot your computer.
  2. when the Norton GoBack splash screen appears, press the SPACEBAR.
  3. in the Norton GoBack boot menu, click on disable.
  A message informs you that disable Norton GoBack erases history and you will not be able to run the hard drive or hard disk restore advanced restore until Norton GoBack is turned back on.
  4. click on Yes.
  5. click on continue.
  Your computer restarts automatically, and Norton GoBack is off
  After restarting the laptop, I recommend once again using the following key: CTRL + ALT + G.
  Immediately press on and hold the keys Ctrl + Alt + G after restarting the laptop you. A message you giving the possibility to force the removal of GoBack master boot record. Press F to force the removal of GoBack master boot record.

  If failure of keys Ctrl + Alt + G in the first time then try this again for three or four times until you get the prompt to remove the master boot record of GoBack.
  Finally, restart the computer.

  To fix bad sectors on the HARD drive, you could boot from the XP CD to use the console of "repair".
  And then use the CHKDSK /p command to repair the bad sectors.

  Good luck

• If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages b

  If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages by using Outlook.

  See this article.
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• Camileo P100 screen is black, but the noise from the unit

  Hi all
  I just bought a Camileo P100 and fully charged.

  Although it seems to work when you take a picture the camera 'clicks', the video recording the LED flashes, the touch screen is black and I don't see anything.

  When you touch the screen, it doesn't seem to be working (there are noises from the unit when I touch the screen), but the screen is black.

  Can anyone help?

  Thank you
  Mark

  Hello

  Try, press and hold the button On / Off a few seconds.
  Also check if the opening of the camcorder is open

  But it looks a bit like a hardware problem.

• Satellite L500 and the noise of the fan

  Last week, I bought a new laptop Satellite L 500 with Inter i3 processor, 1 GB, 4 GB of ram ATI graphics card, etc.
  Everything is OK in general, however, I think the fan is very noisy.

  I used to own a HP Pavilion laptop and could hardly notice the fan while with my new laptop, the noise of the fan is really loud.
  Does anyone know if this is normal or if it could be fixed somehow?

  I did some internet research for a solution, but I couldn't find anything, and apparently nobody complains noise from the fan on L 500 computers portable so maybe it's only me that have this problem?

  Thank you.

  Stefano

  For optimal use for laptop use the balanced power plan. Go to the advanced settings for this plan and energy saving of Toshiba, you can find cooling method.
  The level here. I'm sure that notebooks fan will be much quieter than before.