Ban the fields with the same entry?

Similar Questions

• Are the AdobeID and inputs of password that I connect on your website are the same entries that I use to install Digital editions 4.5 on my computer?

  Are the AdobeID and inputs of password that I connect on your website are the same entries that I use to install Digital editions 4.5 on my computer?

  Hi % 20% 20mark bark.

  Yes, it would be the same. However, you need to make sure that it is exactly the same adobe id with which you made the purchase.

  Let us know if this helps!

• Concurrency with replicated Cache entry processors

  Hello
  
  In the documentation says that entered the replicated cache processors are run on the original node.
  
  How concurrency is managed in this situation?
  What happens if two nodes or more are invited to run something on an entry at the same time?
  What happens if the node initiating enforcement is a storage node disabled?
  
  Thank you!

  Jonathan.Knight wrote:
  In a distributed cache entry processor runs on the node that owns the cache entry. In a replicated cache the same entries are on all nodes, so I think that one of the questions was what happens in this scenario. I presume that the only EP execues on one of the nodes - it would be unwise to run on all nodes - but which should I use? Is there still a concept of owner for a hiding replicated or it is random.

  At this point, I would have coded a quick experiment to prove what is happening, but unfortunately I'm a little busy right now.

  JK

  Hi Jonathan,.

  in the replicated cache, there are always a notion of possession of an entry, in terms of consistency, it is called a lease. It is still owned by the last node to perform a change successful thereon, where change could be has put/remove, but it can also be a lock operation. Granularity of lease is through entrance.

  Practically the lock operation in the code pasted Dimitri serves two purposes. First, it ensures that no other nodes cannot lock, second that it brings the lease to the lock node, so it can properly run the processor entry locally on the entry.

  Best regards

  Robert

• Update from the field with consecutive number according to the number of entries

  Hello
  
  I need to update a field with a consecutive number according to the number of lines where the entries are made which go hand in hand. What it means:
  I have
  SYSAUSPR AREA SYSGEBIET TYP RANG
  182925 600003 4 1 PERSON
  1 600004 4 1 PERSON
  2 600004 4 1 PERSON
  3 600004 4 1 PERSON
  17 600004 4 1 PERSON
  18 600022 4 1 PERSON
  182864 600079 4 1 PERSON
  184082 600092 4 1 PERSON
  182774 600143 4 1 PERSON
  PERSON 183237 600165 4 1
  NO 7 600169 4 1
  8 600169 4 1 PEOPLE
  9 600169 4 1 PERSON
  12 600169 4 1 PEOPLE
  14 600169 4 1 PERSON
  184309 600179 4 1 PERSON
  23 600182 4 1 PERSON
  
  I need to change column "RANK" of 1 the number of records that have the same id in the "SYSGEBIET" column (from this example with 600) so that it looks like
  
  SYSAUSPR AREA SYSGEBIET TYP RANG
  182925 600003 4 1 PERSON
  1. NOBODY 600004 4 * 1 *.
  2. PERSON 600004 4 * 2 *.
  3. PERSON 600004 4 * 3 *.
  17. NO 600004 4 * 4 *.
  18. NO 600022 4 * 1 *.
  
  Does anyone has an idea how to solve this problem in an update statement?
  Thanks for your help
  Best regards
  Carsten

  SQL> select  *
    2    from  tbl
    3  /
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           1 PERSON     600004          4          1
           2 PERSON     600004          4          1
           3 PERSON     600004          4          1
          17 PERSON     600004          4          1
          18 PERSON     600022          4          1
      182864 PERSON     600079          4          1
      184082 PERSON     600092          4          1
      182774 PERSON     600143          4          1
      183237 PERSON     600165          4          1
           7 PERSON     600169          4          1
           8 PERSON     600169          4          1
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           9 PERSON     600169          4          1
          12 PERSON     600169          4          1
          14 PERSON     600169          4          1
      184309 PERSON     600179          4          1
          23 PERSON     600182          4          1
  
  16 rows selected.
  
  merge
    into tbl t
    using (
           select  sysgebiet,
                   sysauspr,
                   row_number() over(partition by sysgebiet order by sysauspr) rang
             from  tbl
             where sysgebiet like '600%'
          ) u
      on (
              u.sysgebiet = t.sysgebiet
          and
              u.sysauspr = t.sysauspr
         )
    when matched
      then update set t.rang = u.rang
  /
  
  16 rows merged.
  
  SQL> select  *
    2    from  tbl
    3  /
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           1 PERSON     600004          4          1
           2 PERSON     600004          4          2
           3 PERSON     600004          4          3
          17 PERSON     600004          4          4
          18 PERSON     600022          4          1
      182864 PERSON     600079          4          1
      184082 PERSON     600092          4          1
      182774 PERSON     600143          4          1
      183237 PERSON     600165          4          1
           7 PERSON     600169          4          1
           8 PERSON     600169          4          2
  
    SYSAUSPR GEBIET  SYSGEBIET        TYP       RANG
  ---------- ------ ---------- ---------- ----------
           9 PERSON     600169          4          3
          12 PERSON     600169          4          4
          14 PERSON     600169          4          5
      184309 PERSON     600179          4          1
          23 PERSON     600182          4          1
  
  16 rows selected.
  
  SQL> 
  

  SY.

• All the fields are filled automatically with the same information as in the field.  When deleting, all delte also fields.

  Whenever I type information in the first field of the form, it automatically fills the same information in all areas.  How can I stop this

  If you don't have Adobe Acrobat Reader for free, you can not.

  It was more than likely a mistake by the creator of forms. No doubt, they have created a field copy and paste this one to create others. Usually, it's ok, but must be given to all fields different identifiers (names). All the fields with the same name will be filled with the same content.

• I have created a complete either form, with fields to interrogate.  When a test the form and enter the date in a field - it automatically inserts the SAME date in all other areas. How do fix you this?

  I created a form to fill in professional, with several fields.  When I try the form and enter data in a field - it fills the SAME data in all other fields.

  Give a unique name to each field.

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Update database with several form fields with the same name

  If I've made good progress on my CF photo album project, but now I meet a problem.  Once I downloaded a collection of photos and them inserted in my database, I bring up a page that is actually an array containing the thumbnail of each image, some info on it and the description of the photo.

  The table is inside a < form > tag, and the description is a < textarea > tag.  I have many text boxes that I have pictures, so there may be any number (within reasonable limits).  I'd like to be able to type a description for each picture in each text box rather than having to do one at a time, and then click the button submit to update my file.

  Each text box has the same name, so I had the idea of adding a hidden form field that held the photo ID, then on the processing page, I might have a < cfloop >.  My problem is that I can not understand how to associate each photo with the corresponding description ID, especially if we consider that some of the descriptions may be empty.

  Is there a good way to do this?

  As you probably understand, giving all your textareas eponymous means that when the form is submitted, you get a value that is a list of the contents of each text box comma-delimited.  If none of the commas are typed in the text box, you have a problem.

  My preferred method is to include some sort of identifier as part of the name of the form field.  Since you have ID photo available, I would use those.  This would give your names textareas as description_111, description_112, etc.

  When the form is submitted, I loop through the form.fieldnames list.  If the first 12 characters are 'description_111', I can remore 12 characters to get the id.  I also have the content of the text box using the array notation.

• Rename fields with the same name

  Hello

  I ended up creating a form with several boxes of hundreds.  In order to create, I create a few check boxes and then cut and paste to generate the rest of the form.  Unfortunately, this means that all the fields have the same name and face to the same value.  Can I write a script that will change the name of each field?  My boxes are "Yes #0", ' Yes #1 "," #2 yes ", etc.."  I want them to be 'yes0', 'yes1', "YES2", etc.  But, when I try to 'this.getField("yes#0"), we just return null.  Y at - it a syntax that I can use with getField to go individually to each box?

  I don't really want to open the properties on the + 400 boxes Editor...

  Thank you.

  You cannot rename fields with JavaScript. But you can create as many times as you need in a loop by using the doc.addField method. So could copy properties (rect, etc.) of your current fields and recreate each using the name you want. You can access instances of fields (widgets) using the getField as method:

  Get the rect of the first 'yes' field

  var Rect = getField("yes.0").rect;

  For more information, see: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.679.html

  When you are finished adding new fields, you can remove the old with the doc.removeField method.

• I have a problem with my iPhone 6 s more battery.  When he arrives less than 30% the phone will stop and will not restart unless I connect it to the charger.  Once it reboots it shows the same battery as the entry stop percentage.

  I have a problem with my iPhone 6 s more battery.  I had to 'support' from Apple telling me there is nothing wrong with the battery, I was at the store and had them test and I had two replacements and they all did the same thing, even to start the replacement up as a new phone so that there are no applications that could contribute to the problem.  I told them repeatedly it was their software problem, but they said they had never "heard of someone having this problem.  I have not updated to the latest version of the software to see if the problem still occurs and initially it didn't, but then he was back at close to 30% or less, even if there is a power adequate to continue much longer.  I've updated to the latest version because it refers to a "correction of battery problems.  Unfortunately, it makes no difference at all.  I had iPhones for many years and have always been a fan, but my next phone will be a Samsung unless Apple admit to their problem and sorting.

  When you've got additional phones you restore from a backup or set up as a new device?  If the first case, then this is probably your problem.

  Restore the configuration as a new device / phone and be on your way.

  PS None of your fellow users on these forums really care if you get a samsung and I don't know that apple will do fine without you as a customer.

• How to implement multi-site with the same URL field in the ATG

  Hi guys,.

  I have a multisite transposition obligation with the same url domain but ATG does not support same domain URL for multisite. Can someone please help me with this problem?

  David.De - Oracle

  Thank you

  Vivek

  As I said use custom filters to read the parameter when the user clicks on the link for the site of CA and set the site context.

  You can store a cookie that determines the site for subsequent applications.

  Peace

  Shaik

• FRM - 40202:Field must be entered on two blocks with the same table

  I have two blocks, blockA and blockB, both from the same table that is tableX.
  
  When I ask of blockA and it worked, then I go to blockB and modify data, and save, there is no problem. But when I do not run the query of blockA or if the query did not return any results, I go to blockB and change some data then save, I got this error. The cursor then go to first blockA point. So now, I have to delete this empty line before the Save.
  
  
  Any suggestion?

  you set a few initial values programmatically for a block?
  in this case, the status changes to INSERT and you will get this message.
  You can check the staus with GET_RECORD_PROPERTY (1, "A BLOCK", STATUS), e.g. with the trigger KEY-COMMIT.

• Multiple tables with the same field name

  Hi, I have a query that pulls a field named 'Total' from 20 different tables (week1 - semaine20). When I try to view the results as #Week1.Total #, for example, I get an error saying that Total is not defined in week1. I also tried totalHours.Week1.Total (totalHours is the name of my request), but get the same thing - Week1.Total is not defined in totalHours. Help, please! Thank you!

  Alias your colunms...

  SELECT
  request.ID, request. FirstName, request. LastName,
  Request.SEM, request.year, request.banner,
  Week1.id AS wk1_ID, Week1.Total AS wk1_total,
  Week2.id AS wk2_ID, Week2.Total AS wk2_total,
  Week3.id AS wk3_ID, Week3.Total AS wk3_total,
  Week4.id AS wk4_ID AS Week4.Total wk4_total...
  ... etc.

  They will now have different names in the output. (The table name prefix that is used in your query on each column is never displayed in the output.)

  Phil

• OWB, I need to update the target table with the same field for game/update

  OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
  
  Update table
  define RFID = 0
  where RFID = 1
  and ID_processus = 'TEST '.
  
  Can HWO I do this in OWB.

  I have check but in the case later (last one) that he warns no error if you can go with it.
  and I tested it it works

  You can check the first case (from where we start) if it has been warned and then try to run.

• My iTunes is a collection of songs with the same artist, the same album artist and the same album separately. How can I fix it?

  Can someone tell me how to solve this problem? I put a lot of effort in organizing my collection and I hate to see 15 sections 'Lil Wayne' in my artist entry or right of the complete discography of Paul McCartney by Paul McCartney with 1 song. I tried to edit all the files together, intentionally misspelling the name and spelling then it right once again, but it do not work and that the use of work well, but it doesn't seem to work.

  If iTunes displays multiple instances of an artist or an album then generally what works is to select all the associated tracks and use read information to add say end X for each of the areas that the slopes have in common:

  • For an album. Album, artist of the Album and artist (if the artist is the same for all tracks) *.
  • For an artist; Album artist (artist and unless there is the comments/featured artists listed that should not be changed)

  Apply the change which merges things together, then remove the excess characters. Occasionally, it can help to close and reopen iTunes between two renaming operations. Part of a compilation should also be set in a consistent manner.

  * If the titles must be synchronized to a non - iOS device, there should be a common artist and/or album must be defined as a Compilation.

  Use the view of songs and display fields, Album, genre, Album, Album artist, genre artist Album, artist and genre artist side by side to see you whether or not it is necessary to change the artist and if sorting values could be the cause of additional problems. See grouping in albums, titles for help if necessary.

  Another tip duplicates stubborn reality. At one point, I had three batches of various artists in the view of artists in my iTunes game library that wouldn't meet usual backward X treatment. What I found worked was adding the final X, but with each group, iTunes wanted to separate start typing a value and let iTunes autocomplete of the Var... for various artists. Collection of AutoComplete lists seemed to work when the full value of collage/montage does not.

  TT2