band, colorful on 30% of the image

Similar Questions

• After update command CC Photoshop liquify and then filter it was the color cracks appear on the image

  After update command CC Photoshop liquify and then filter it was the color cracks appear on the image

  This bug has been fixed with the latest update (Photoshop CC 2015.1.1).

• Change the matte color to jpg for the image assets

  Is there a way to change the matte color of white for the generated images jpeg?

  Photoshop can save jpeg files in the folder you are working on.  Photoshop is not a file editor.  You can change the image, you work on the appearance in many ways.

  If you open a JPEG with Photoshop it open like a background image layer.  The background layer, Photoshop does not support transparency.  If you add the canvas, you can add any color you want from the Web. There is no separation between an object in the background layer and the area around this object that is a unique raster layer.

• Open an Image in Photoshop puts a pink color on top of the Image.

  I work with the CC 2015 version of Photoshop. When I start a new image in Photoshop, everything is fine. When I open an image in Photoshop, it puts this pink color on top of images. I have a black and white image for example, and it opens in Photoshop causes the white part turn pink. Similarly just regular color images get a pink above them, as if I put a pink colored filter on top of the image. I scoured around and I can't seem to find an answer to the problem I have. Any help would be appreciated. I would like to mention that all open images mode is RGB.

  Looks like the problem fixed itself. I left on Photoshop and then re - open the photos everything was just peachy. In this case, even once, that I will remember to take a screenshot of it. I honestly don't know what could have caused this is the first place to be completely honest.

• Cannot make the fx color correction without getting the image of strobe

  Cannot make the fx color correction or blur fx with masks without getting the image to strobe. Do not return in the sequence, or export without the video strobe effect. It is clearly a problem since at least 2011 because I saw some forum posts dating back that far. Don't know how or why it is always a question 5 years later. I have the correction color fx on an adjustment layer that makes very well. Leave color and blur fx on a couple of individual clips is whats creating the problem. Does anyone have a solution? It does not appear that I can wait for Adobe.

  At this point, I would create a sequence for each clip (in the garbage, make a right click, create sequence and apply the FX it) then replace the clips in the mixture with the sequences.  -Test this point by one before they go crazy.

  OR, using the idea of sequence preceding above, return on a new clip with holiday color applied to replace as new originals in the mixture.

  Third idea: replace the clips with linked AE comp and try the color of leave which are.

  In short, do what you can to take the color of leave out of the final equation.

• HELP: The random colored lines appearing in the Images

  I recently updated my ASUS GTX980 video card and use that double ASUS PB278Q monitor.  Before the upgrade, I wasn't having this problem, but now I have these random bars appear in the images.  It does not reach all the images but is very common, perhaps both the image almost. Someone knows what's the problem?

  

  My system:

  8.1 pro 64-Bit of Windows

  Intel i7 - 4820 k @ 3.70 GHz

  16 GB OF RAM

  ASUS GTX980 Strix 4 GB GDDR5

  I raised my Cache tile size after reading something on Google and seems to work very well for now.  If she does that again I will try these steps.  Thanks for the reply! =)

• Undesirable color imported-how find the image that it is?

  I'm working on a big, 2 book of colors with many imported images. At least an image imported a third color that I can't see. Without opening of 50-60 images and research, is there a way to know what image has used color? It must be behind a solid color that is used. Thank you.

  Open the separations Preview Panel and turn off the two colors that you use. Whatever it is showing on the left is a problem. Or define a preflight profile to ban the CMYK...

• MS paint does not correctly save the images

  Hey guys.  I have a slight problem.  Whenever I close a Microsoft Paint Document that is saved, the next time I open it there are small dots of random colors that "mix" with the image.  However, this is problematic because then the paint bucket will fill only the portion that is not discarded.  After several times to open and close the document, the pictures are also very badly tainted.  I have a Windows Vista, who has not yet upgraded to Windows Seven.  This is my first post here, so I don't really know what (if any) additional information is required.

  Thank you! :)

  Hi-

  I don't know if the problem has been corrected, but if not, I found a possible solution.

  I lived the same problem for a while, and I recently thought about it. If you save in JPG format, the tasks of random colors seems to occur. I tried to save the 24 - bit card ' shape and it seems to eliminate the problem. I hope this works for you also.

• Layers and Trace the image

  Is it possible each output color got trace of the Image in a single layer? For example, I have 50 colors in Image path and I want 50 layers, each of them with a single color.

  Thank you.

  Nico,

  Object > images Trace > expand.

• Color of the image area measurement

  HIII

  I want commensurate with colours (RGB) of the region of the image and have the result in the table of red, green and blue color samples

  and display the histogram

  Thank you

  If you have the NI Vision Development Module, you should have a "IMAQ ColorHistogram" function available. It should provide what you are looking for.

  Again, you must ensure that your images are acquired correctly. This by far isn't a simple thing (refer to this thesis for more information).

  Norbert

• Display of the color after treatment in grayscale image

  Hello

  I'm writing a vi using the geometric model of correspondence that will search a specific letter (eg. A, B, c... as stated below in Image1) both on live video. My code seems to work OK, but the only way I was able to do research work has been using (as shown below in Image2) imaq image cast and convert in grayscale (U8). My problem is that I need the final image (which is superimposed with a red circle in the Center - see Image1) to be in color, but so far my vi works only in grayscale.

  Any thoughts anyone?

  Image1

  

  Image2

  Connection of a wire does not have a copy of the image.  You must create a second image to shades of gray.  IMAQ Cast should have an entry for a destination image - wire image to grayscale in there.  If it doesn't, make a copy of the image (IMAQ copy) then use the Cast operator.

  Bruce

• The color of threshold IMAQ blank image

  I'm doing a base color threshold program, but the result I get is an empty image, but only when I create the display in the Panel before me. When I copy the color Thresold.vi example screen output, it can display the output of the binary image.

  What is the difference between the output of two screen? How can I make this possible without having to copy from anywhere else?

  

  Looks like you have to select the binary Palette to the display image control that you create:

  

• can I know the reason for the change of color in the image - canon EOS rebel T5

  Hi, I am using canon EOS rebel T5... Recently whenver I clicked on an image using this device, I get color variation in the image that I've highlighted in the image below... It's because of the lens or the camera settings... Pls help me to get a clear picture

  

  What are compression of camera settings, for example, I use fat with Fine quality

  This 478KO scares me, it's really small for a 4000 x 2000 image. You use too much jpeg compression which is ruining the image. You need to set a level of quality JPEG 9 or 10 - it will result in larger images, but as you can see, throw the data has detracted from your images.

  If you want to send pictures, decide first the smaller number of pixels you can hang out with and then use just enough of JPEG compression to get the size you want.

• How in the paint can have the background color assumes that the background color of whatever the image is stuck on

  I have a photo I am amending in paint and erased what I don't want image.  Unfortunately, now when I import the image into PowerPoint, the cleared area of the image is the color I used in painting.  How can I get the color of the image in the painting to use whatever the color of the background is where the photo is stuck?  For example, if the background in PowerPoint is light blue area which I deleted in the painting seems to light blue.

  Hi GaryDry

  By default, the gum replaces any area you erase by white, but you can change the color of the eraser. For example, if you set the yellow background color, everything you clear turn yellow.

  a. on the home tab, in the Tools group, click the Eraser tool.

  b. in the colors group, click color 2and then click the color you want to erase with. If you want to erase with white, you don't have to select a color.

  c. drag the pointer over the area you want to erase.

  Refer to the below links for more information.
  http://Windows.Microsoft.com/en-us/Windows7/using-paint
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-paint

  I hope this helps.

• Color LaserJet MFP M175a 100: install the imaging drum.

  Hello

  This is the second post from me for the same problem.

  My printer is hp LaserJet 100 color MFP M175a

  It still shows the message " install the imaging drum ", so it does not print!

  Although the ink is new, I just bought it and insert it in the printer.

  I try to turn the drums by this button, but it never turns! I have to use my hand to spin!

  When I press the button, it displays error 49! and demand for filming and on the printer.

  I have reset the printer by default also but the problem still there

  My printer is old, not Internet, only connected to the computer by USB.

  Please I NEED your help.

  Thank you

  Hello

  The imaging drum is different contained in Toner cartridges and will need to be replaced also.

  You can follow these steps to replace the imaging drum, it is accessible from the front door and is not part of the carousel system:

  http://support.HP.com/us-en/product/HP-LaserJet-Pro-100-Color-MFP-M175a/4208157/model/1118287/document/c02631465