Based on roles can read all the records

Similar Questions

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?

  My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?

  Hello

  You mean the sticker on the case of the Vista operating system pre-installed from Dell, HP, Acer, Toshiba, etc.) ?

  If you do, you can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  Hi chrism43238735,

  May I know the process to convert Doc to PDF files. If you use Acrobat to convert the files, and then with the same application you open.

  If you used another process, in this case try using the Adobe Acrobat Reader application. Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek

• How to upgrade all the record for a particular column in a table based on search criteria.

  Hi all

  I'm new to ADF. I have a requirement where I have to perform the update of mass on a table.

  Scenario:

  Ex: I have a search region manual dept. where I search with deptId: 20. I get 20 records in my table. now I have another area where I have an inputchoice list that contains all the column names that exist in the dept table. Beside that, I have a text box and a button update

  The user now, first research with dept id: 20 and click on the button Search, where it shows 20 record in the table. He then select an input choicelist(ex: ManagerId) column, then enter the new value in the decision-making box(ex: abc) then click on the button update.

  Now, I want to, all the records in the ManagerId column with dept id: 20 update with the new value 'abc '.

  Can someone help me with the code.

  Thanks in advance...

  Hello

  If you go to your VO and generate the ViewObjectImpl, here you can create a method that contains two parameters, 1 the name attribute and 2 the value.

  Then you can follow something as explained in this post:

  ADF tutorial: how to apply actions in bulk to a view object lines

  The only difference is that you must create a method like this:

  ' Public Sub updateAttribute (attribute String, Integer value) {}

  RowSetIterator iter = createRowSetIterator (null);

  While (iter.hasNext ()) {}

  Line = iter.next ();

  row.setAttribute (attribute, value);

  }

  }

  Then execute you who expose a customer interface and then after you filter your table according to your criteria just this method passing the correct parameters.

  Concerning

• Nikon D7100, I can't download my RAW to Lightroom files. I have read all the post, update of 3.6 to 4.4 and 5.7 with Lightroom 2015; Nothing helps!

  Nikon D7100, I cannot download my RAW to Lightroom files! I have read all the post and started with Lightroom 3.6 4.4, Lightroom 2015 then Lightroom 5.7 update. Nothing helps!

  The Nikon D7100 is supported from 4.4 LR on-site. So I have no idea why you have problems to import files NAVE of this camera or the card memory used in this device.

  You use the Nikon software first to get images of camera or card to your hard drive? I read somewhere that the Nikon software does something for the NAVE of the files making them unreadable by LR.

• I can't stop the recording of data on a DVD. is it possible to stop this?

  I can't stop the recording of data on DVD

  is it possible to stop this?

  It indicates a security error

  Please help as recycling seems to be the only solution

  Original title: HP Pro Book S-series windows 7 proffessional

  Hello Mike,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I understand that you have problems with a DVD, but I would like to learn more about the issue to provide you with better assistance.

  1. What do you mean when you say, 'I can't stop recording of data on a DVD?
  2. You talk about a blank rewritable DVD? It is specific to a particular disc?
  3. What is the accurate and complete error message when you say, 'this shows that a security error "?
  4. Are you able to eject the DVD? If so, what happens when you save the data without any disc in the drive?

  I suggest you to provide the information identified above to refine the question and provide you with better assistance. Apart from that, you can try the mentioned below of methods based on specified corresponding understanding.

  Method 1:

  If you mean that the data you record are, by default, saved on the DVD player, then you can change the default save location as detailed below.

  1. Open libraries.
  2. Right-click on the Documents folder, and then click Properties.
  3. Click on restore the default settings.
  4. Repeat steps 2 and 3 for the musicfiles, photos and videos in the library.

  Try to save all the data and check if the number is reproduced.

  Method 2:

  If you have problems with the specific DVD when inserted into the CD/DVD drive, you can try to let flow the next fixit and check if it helps.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Hope this information is useful. Please post back with the information required for any further assistance. We will be happy to help you.

• ONCE 1 DISC CD/DVD PLAYER READS ALL THE OTHERS LIKE WHITE

  has got an acer 5315 laptop filth single bed 1 disk. reads all the other virgins or be reformatted, I'm puzzled... any advice would be greatly appreciated.                am running vista Home Basic edition if it helps

  Hi Ronwaddilove,

  1. are you able to play these discs on another computer. ?

  You can read the following article and try to run the Fixit and see if it helps.

  Your CD or DVD drive cannot read or write media

  Hope this information is useful.

• Cannot modify only directory attributes of reading, all the readers all the directories.

  Original title: cannot modify only directory attributes of reading, all the readers all the direcotries.

  For some reason now all directories are read-only. I have a check only reading tab, it goes through the process of change in all files in the subdirectory (I put their scrolling), click ok. But when I go in the directory again that reading is only check again. It is on my C: dirve all directories and all the other readers, including empty directories. Any suggestion would be appreciated. Thank you
  Bit defender shows no problem.
  SdS49r

  Hi SdS49r,

  I would like to ask you a few questions to better understand:

  (a) you connected to the administrator account? because you do not have the \n(Assurez-vous if you are not in the administrator account

  (b) don't you make changes on the computer?

  (c) have you created the file read-only?

  (d) what message do you get while changing the read-only attribute?

  (e) have you been able to change the attributes previously in your computer?

  You can scan your computer, then follow the steps in the link: http://www.microsoft.com/Security_Essentials/

  Try the system restore, it restores the computer to its point earlier while it was working fine.

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  
  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Cannot read all the letters of the key at the back of my computer

  My Win 7 crashed and I need to reinstall it, but can not read all the letters of the key at the back of my computer

  It * may * be an alternative solution, if you are patient and persistent.

  Attempt to activate by phone and speak to an operator - they will tell you that your current key is locked (they then seek confirmation of your product key). Explain your problem, you must change the key of your sticker, but the thumbnail is unreadable (they could please provide a replacement key?). If all goes well, they will request documentary proof of the sticker, in the form of an e-mail with a picture of the affected tile - and you can proceed from there.

  It sometimes takes two or three calls before you get an operator who knows and uses this procedure, but I know that it is possible and happens.

• How can I fill the records using the value LOV

  Create a form based on the use of the following output Table EMP
  
  Create a database block IE control-> Dept No. block
  
  
  Create a database block - EMP
  Create a LOV to the Dept not according to the dept table.
  For the current No. Dept. Complete records of the employees
  
  How can I fill the records using the value LOV?
  
  
  Thank you

  Hello

  Create trigger KEY-LISTVAL for control_block.dept_no with code similar to the following:

  IF SHOW_LOV ('LOV_NAME') THEN
          SET_BLOCK_PROPERTY ('EMP_BLOCK', DEFAULT_WHERE, 'DEPT_NO = ' || :CONTROL_BLOCK.DEPT_NO);
       GO_BLOCK ('EMP_BLOCK');
       EXECUTE_QUERY;
  END IF;
  

  Hope this helps

  Best regards

  Arif Khadas

• delete all the records in a table, the speed of insertion is not change.

  I have an empty table, and I insert a record need 100ms.
  During this table a 40,0000 trace, I insert a record need 1 s, it's ok, because I need to make a comparison according to an index before inserting a record need, so more record, more time.
  The problem is when I delete all the record in this table, the insertion time is always 1s, not reduce to 100ms. Why?

  Hello

  Read this part of the oracle documentation

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14220/logical.htm#CNCPT004

  The reason is always 1s, because when you inserted 400ko record as HWM (high tide is the border between old and new space in a segment.) moved to the top. And when you remove all records of your HWM still in the same coordinate system and that you have not reset to 0. So when you insert 1 it save free space and after finding faces (usually a regular insertions got 6 steps it inserts data). If you truncate your table you and try it again it will be faster that your HWM is reset to 0.

  Concerning

• Thunderbird says it can't find the records that my message filters use and are present in the list of folders.

  The error message reads:

  The record [which] is not found, then the filters associated with this file will be disabled. Verify that the folder exists, and that the filters to point to a valid destination folder.

  If I manually edit the disabled message rules and try a mail run, the same error messages come up.
  

  I have the problem solved. The database of the service provider Internet Mozilla for some reason any returns the name of the server 'imap.gmail.com' when the account is set up in Thunderbird.

  Manually configure as "photoscape", and filters work very well.

• How can you save dead MacBook using FireWire for iMac? I can view all the files on iMac, but don't know how to back up before, I reinstall MacBook.

  My MacBook Pro doesn't start then you want to erase and reinstall iOS. Before doing this I want to back up all my files. If I connect to imac via FireWire I can view all the files, but how can I save it it?

  If your MacBook will start in target disk Mode, follow the instructions on how to set up and use...

  Share files between two computers with target - Apple Support disk mode

  But you do not want to share files, just to save them. You can make a "clone", using disk utility. For cloning utility purposes use a program likeSuperDuper! or double clone.