Basic timing does not

Similar Questions

• my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen

  Original title: green screen

  my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?

  Hello

  1 - do you mean that you get the green screen even in safe mode?

  2 did you recent hardware or software changes to your computer before this problem?

  If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• Acer Aspire laptop with Vista Home Basic Edition does not, System Restore does not, sfc, find corrupt files but do not repair. Need help!

  Hi, I have an Acer laptop Aspire with Vista Home Basic Edition that came pre-installed, so no records only the disk hard drive partition.

  I turned on my laptop today and it starts but the loading bar of stalls at the black screen with "(c) Microsoft Corporation" and dragging green. The slide bar will continue to drag, but nothing else happens which means that I understand even as much as the login screen. I rebooted and tried Windows recovery, but the only remedy to what he suggests is a restoration of the system, which does not have any point, I try to restore it.

  To remedy this, I have connected in safe mode and ran the SFC command prompt. It scans my system and told to find corrupted files, but he can't heal some. This is where my knowledge limit runs out. I don't know how to fix the files that the SFC cannot. (Also I created a journal using the findstr command prompt and checked but it say anywhere that it was unable to fix it so I'm not even sure how to identify corrupted files)

  As it's an Acer laptop, Aspire I'll try their eRecovery tool to return my computer to factory settings, but it won't work in safe mode, and as I said I can not connect normally. I tried alt and F10 at the initial boot screen when I turn on, it loads the windows files and shows the Acer "Please wait a moment" screen and then nothing happens again.

  I can't afford to get it fixed, and there is no chance I can get a new laptop. Any ideas/help? Thank you.

  Hello

  You have t in Normal Mode to resolve problems by using upgrade repair facility that is SFC

  Read this topic eRecovery Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Windows Home Basic Edition does not connect to a grace wireless working group

  I'm running 3 computers on a workgroup that connects to the internet. A computer running Windows 7 Pro, another Windows XP Pro and the third is a laptop running Windows 7 Home Basic.  There are full between the 3 interoperability when connected via a LAN cable, even when the laptop is connected to the wireless router.  However, if I try to use the laptop without cable, it will connect to the router wireless as an unidentified Public network and therefore does not see the Working Group (and therefore there is no internet access).

  If I click on the icon of unidentified network in the center network & sharing, I expect to be able to select the type of network, I can use - i.e. knit - but instead I get a box indicating that it is a public network, unidentified without options.  I tried to use the difficulty Microsoft it 50725 - but he said he could not change the network settings and I should change in network settings - which I can't.

  In this mode, I can 'see' the laptop on the other two computers, but its network location is black (not the working group only when connected via cable) and if I try to open up the laptop I get an error message saying: it can not find the path.

  This is a recent problem that the system worked very well upward until a couple of there are days where I lost wireless connectivity. The signal strength is 100% (the router is normally less than 30 meters, although now is 1 meter away so I can plug the cable) and there is no other networks wireless within several km.  I have a total control through my browser to the router through the wireless link wireless, the material is so everything is OK - it takes a few adjustments to the software.

  Any ideas?

  Sorry for the delay in replying, I had problems to download all the drivers the most recent, but ultimately successful.

  Uninstall and reinstall the wireless card had no effect so I started the update or replacement of all other drivers as well.

  Replace the Bluetooth driver did the trick, even if it has been disabled in advance and it is always off - but for reasons that I doubt I'll never, understand which seems to have been the problem--for now

  Thanks for the advice - it always pays to be more radical than you ever thought necessary...

• THIS IS LAME: css coding to a basic appearing does not in level browsers

  I don't know why, I'm having such a fundamental issue with Binder sheets CSS in dreamweaver, have the CSS code will appear correctly in the design window, but the CSS does not appear in all browsers? Anyone else having this problem? Is there something wrong in the formatting?

  CSS script
  @charset "utf-8"; / * CSS document * /. .1 a: active {} fonts: Verdana, Geneva, without serif. font-size: medium; background: #0F6; color: white; } .1 a: hover {} -adjust the alignment: central; font-size: medium; Background: #0CF; }

  The HTML code is:

  HTML

  <! DOCTYPE html > < head > < title > examples of button < /title > < link href = "buttons.css" rel = "stylesheet" type = "text/css" media = "screen" > " < / head > < body > < div class = "1" > < a href = "#" > button < /a > < / div > < div class = "2" > < a href = "#" > button < /a > < / div > < div class = "3" > < a href = "#" > button < /a > < / div > < div class = "4" > < a href = "#" > button < /a > < / div > < div class = "5" > < a href = "#" > button < /a > < / div > < div class = "6" > < a href = "#" > button < /a > < / div > < div class = "7" > < a href = "#" > button < /a > < / div > < div class = "8" > < a href = "#" > button < /a > < / div > < div class = "9" > < a href = "#" > button < /a > < / div > < div class = "10" > < a href = "#" > button < /a > < / div > < / body > < / html >

  I agree. There are some things I've learned that not workin CSS because they are already analysed by the browsers rules or definitions. Numbers of class or ID for example. Class or ID named "Center" 'left' (or 'middle') or 'right '.

• Windows Vista Home Basic Edition does not detect networks wireless scope.

  running Windows Vista Home Basic on my counter top and it will not locate wireless... period. I know at least 3 in the box and he is always telling me that there are no wireless networks detected.

  On a side note, I installed my router wireless on my laptop (so I know it works!) and have successfully installed on my desktop as well (or if the installation wizard tells me) the top round works on vista premium and office is vista home basic, but for some reason, the office is always telling me there are no available wireless networks. I went through the installation wizard for my router wireless twice now and still that it prove when I go to "connect to a network.

  As much as I know there is no 'Wireless' or switch to be turned on anyway... There may be a command prompt to enable the wireless function?

  Hello

  Have you been able to use the network without any problem on your desktop computer wireless earlier?

  The following articles might help you solve this problem.
  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Basic settings does not

  My Control Panel basic functions setting seems to no longer work.  No visible change, appear on photographs for exhibition or one of the other basic features of.  Does anyone have a solution?

  This isn't your basic setting Panel that is your brush/Graduated Filter adjustment / Radial filter Panel. Your basic Panel is missing.  Right-click on the header of the tone curve Panel and place a check next to the base to restore.

• Application_Setup_Wizard of visual basic 5 does not work on windows 7

  When you start the visual basic Application_Setup_Wizard 5 Windows 7 the message "an unexpected error has occurred."

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  The question you posted would be better suited in the VB Support Forums. I would recommend posting your query in the Forums of Visual Basic.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Basic button does not

  Well I lied it works at first but then it stops

  I have a flash site that has a page of presentation, it offers a menu of two buttons (1) to take you to a slideshow and (2) that will lead you to the gallery. These are only two buttons that seem to work in control test film, I get no error.

  The only connected button is slide show button (I haven't done the Gallery yet). This button takes you to the two framework. where I have the main site. It has its own menu that spans the entire site which is of 25 images. each image represents a new page. I have menus minis images 3, 5 and 10. who are supposed to just giving the user to correct the image labels and stop.

  Here is my problem

  the only buttons that work are the ones in the first images.

  animated buttons seem to work on all pages when I advance the film by using the key [.] but I don't no witch instruction trace means that it is not recognized, the buttons are named correctly I think so I don't know what is the problem, here is the code as well, everything is in the framework:

  Stop();

  handle events for the buttons...

  Gallery.addEventListener (MouseEvent.CLICK, clickSection);

  Home.addEventListener (MouseEvent.CLICK, clickSection);

  Location.addEventListener (MouseEvent.CLICK, clickSection);

  Guest.addEventListener (MouseEvent.CLICK, clickSection);

  Lodging.addEventListener (MouseEvent.CLICK, clickSection);

  Cuisine.addEventListener (MouseEvent.CLICK, clickSection);

  ExploreEcuador.addEventListener (MouseEvent.CLICK, clickSection);

  Direction.addEventListener (MouseEvent.CLICK, clickSection);

  Home.addEventListener (MouseEvent.CLICK, clickSection);

  Lodging.addEventListener (MouseEvent.CLICK, clickSection);

  Amenities.addEventListener (MouseEvent.CLICK, clickSection);

  Hotel.addEventListener (MouseEvent.CLICK, clickSection);

  Coast.addEventListener (MouseEvent.CLICK, clickSection);

  BahiaDeCaraquez.addEventListener (MouseEvent.CLICK, clickSection);

  CentralBankMuseum.addEventListener (MouseEvent.CLICK, clickSection);

  IslaCorazon.addEventListener (MouseEvent.CLICK, clickSection);

  RioChone.addEventListener (MouseEvent.CLICK, clickSection);

  Beaches.addEventListener (MouseEvent.CLICK, clickSection);

  CaboPasado.addEventListener (MouseEvent.CLICK, clickSection);

  LaSegua.addEventListener (MouseEvent.CLICK, clickSection);

  CerroSecoPark.addEventListener (MouseEvent.CLICK, clickSection);

  WhaleWatching.addEventListener (MouseEvent.CLICK, clickSection);

  SeasonalTours.addEventListener (MouseEvent.CLICK, clickSection);

  HomePage.addEventListener (MouseEvent.CLICK, clickSection);

  Contact.addEventListener (MouseEvent.CLICK, clickSection);

  end of menu

  function clickSection(evtObj:MouseEvent) {}

  //trace shows what is happening... in the output window

  trace ("the"+ evtObj.target.name + "button was clicked!" ")

  //go to the section clicked on...

  Stop (evtObj.target.name);

  }

  Help me to Adobe-wan, you're my only hope...

  If you have these buttons in different keyframes but just code assigned to them in a ketframe, the only ones that will work will be those of the coded image key. When you create new keyframes, you create new instances.

• 'New Art has basic appearance' does not

  I have enabled, but whenever I draw a new line, it uses the calligraphy brush. What can I do?

  Use pencil instead of the Brush tool.

• Windows 7 Home Basic: custom Option does not appear

  I have windows 7 home basic when I right click on the desktop customization option does not appear and I can't change the color of my task bar.pleaase help me

  Hi Matrix

  Missing customization is normal because Windows 7 Home Basic Edition does not support themes. See the following article for an explanation.

  The "Customize" option is missing from the drop desktop on Windows 7 Home Edition basic

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Basic commands and functions does not

  Hello

  MAIN PROBLEMS:

  1. Chronology of basic functions does not work. My tool icons do not change (for example I click on C for the Cup and the cursor remains a mistake), they still work.
  2. I can no longer drag my clips in and around the timeline, they are "stuck" in place.
  3. A clip with the audio and video are not bound when placed in the sequence. In the video drop-down, it is said that they are linked, but clips act otherwise.
  4. I can't right click on anything in my calendar.

  So here's the big problems I've met only a tooling around. I tried uninstalling and reinstalling several times, with 2015.4 and 2015.3. I'm puzzled.

  The film plays very well and is able to export, problems seem to focus on the timeline navigation and use.

  TECHNICAL DATA:

  • 2013 mac Pro
  • OS X El Captian
  • Version 10.11.1
  • 3.7 GHz Quad-Core Intel Xeon E5

  Any help would be greatly appreciated!

  Hi PatrickShelton,

  Sorry about your problem, try the following steps.

  Go to the following locations:

  1 location: In the Finder, click go > go to folder > ~/Library/Application Support/Adobe

  Situation 2: Go > go to folder > ~/Library/Preferences/Adobe

  Location 3: Documents > Adobe

  Everywhere, rename the folders 'Adobe' to 'OldAdobe '.

  Launch the first, accept the license agreement and see if it works.

  Note: You will lose your customized workspaces and keyboard shortcuts.

  Thank you

  Ilyes Singh

• Firefox does not take into account the settings in/etc/hosts Mac Mavericks

  Firefox sees only the first entry, defined in/etc/hosts to 127.0.0.1.

  Basically, Firefox does not see the changes to the DNS entries, that I made in/etc/hosts. Chrome is. However, later, I noticed that Safari is not to see them. After troubleshooting below, I solved the problem by moving all my/etc/hosts statements to different lines according to them here: http://www.justincarmony.com/blog/2011/07/27/mac-os-x-lion-etc-hosts-bugs-and-dns-resolution/

  I have no idea why that works. But it does not resolve the problem for Firefox and Safari.

  I have tried a number of things according to this thread: https://support.mozilla.org/en-US/questions/1011327

  I tried many things (typing about: config in the address bar):
  Set keyword.enabled false
  browser.fixup.alternate.enabled set to false
  tour of DNS caching.

  None of these things worked, but did all my config/etc/hosts the migration of multiple domains on a single line to separate lines. Hope this helps someone.

  all my config/etc/hosts the migration of multiple domains on a single line to separate the lines did. Hope this helps someone.

• A WI - FI connection does not work on Satellite C50-A-179

  Hi all!

  I am owner of laptop Toshiba Satellite A-C50-179 (PSCGAE) with Windows 8, and recently I tried to install Connectify on it.

  However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop and given this Connectify couldn't work. I tried to activate/install somehow using advice found on the internet. The suggestion was to reinstall the driver for the wireless adapter.

  I uninstalled the driver original and reinstalled again after you download from Toshiba Web site ([here | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7934 & selSh ortMod = 3969 & language = 13 & selOS = 40 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 86778 & DISO = 40 & driverLanguage = 42])

  I'm sure that I downloaded and installed the right driver for the right card that is "Qualcomm Atheros AR956x Wireless Network Adapter". I made prior to installation to verify all the information on the adapter and the driver.

  However, after the relocation wifi stopped working completely:

  -l' icon/network adapter wireless connection 'Control of the network connections and Internet\Network' is there but it does not behave as it should, it looks like a generic and not specific to a network connection icon - basically, it does not represent the actual adapter and got the name of it in the note;

  WiFi - option in Windows 8 settings menu-changes PC network settings has completely disappeared (bluetooth option is still there and so is the flight mode option);

  -wifi can be turned on by pressing on activate in the menu of RIGH click that generic network connection I mentioned, but it will not pick up any signal and will find all the same connections so it is certainly.

  There is no yellow exclamation point in Device Manager list and the wireless adapter is thus, to act and to pretend as if everything is fine and working properly.

  I tried troubleshooting, installing the driver using Windows Update, the installation and update of its properties menu driver in Device Manager and all kinds of things like that, but none of this has helped and wifi still doesn't work.

  Basically, the laptop seems to think that the adapter is not working properly and everything is fine HW and SW wise, but in reality it is not. I don't really know what I should try, I don't want to reinstall the entire operating system, because I'm afraid (or I) would mess everything up even more (wasting yet more pilots).

  I'm running on a cable internet connection now, and I'm happy it's working (I really need the laptop for work and I can't afford to lose for a day, not to mention some more)

  Could someone help me please?
  Any ideas how to solve this problem and make the wifi working again?
  I will be really grateful for any advice.

  Thank you, Miko31.

  Problem is that Toshiba does not support the third party software and if the problem occurred after installing Connectify you should contact support and ask for help. I mean they know how their software works and perhaps a workaround solution that can help you.

  This software is not known to me, but I can imagine there are now a few conflicts. What should do? It is not easy to say. Try to remove the preinstalled software and clean the registry entries.

  In the worst case, you must reinstall OS and reuse for laptop with factory settings.

• How install .man files or other files that Windows does not recognize?

  I found my own answer. I write just in case someone else has a similar problem.

  I tried to install the software on my computer that was supposed to be a "msi" file and installed as a file ".man". Basically, Windows does not recognize some types of codes that install files can install as. Microsoft Help and chat live did not help, so I called my dad and the solution is relatively simple: change the type of file manually.

  1) go to control panel

  (2) search of Folder Options and open it.

  (3) uncheck Hide file extensions

  (4) go to which the file was saved (make a copy of it to the case where)

  (5) change the endpoint in .msi or your type of file of choice

  6} window opens asking if you want to change the file type, and then click ok.

  I hope this helps someone as lost as I was!

  Thank you

  Bradley

  Well, .man is not a valid file for installers type, so now the question is why the hell gave you a .man as installation file first. You can inform the place you have setup of.