basic workflow steps

Similar Questions

• NDP activity Workflow step comments

  Can someone give us the sql code to find the NDP activity Workflow step comments?

  I can't find them! The 6.111 schema does not seem to reference where they are

  

  HA! Found! You were close! His npdActDocumentCollaborations2 in place npdActDocumentCollaborations

  Select * from plmMultiPartAttachments

  where fkEntityAttachments in)

  Select pkid in npdActDocumentCollaborations2

  where fkActivity = "3223e2c88a0c-6753-429f-b1e0-f699de9e5458")

  Thank you!

• Implementation of date deadline for the approval workflow step

  Hello! I'm trying to set up the deadline for a date of approval workflow. I was thinking of using tokens, so that the user/author enters at this date (using the calendar tool) the custom metadata field, and then this value token can be used in the custom script iDoc in the case of update of the step.
  
  Even if I found something similar in the documentation, I can't understand how to extract the date out of this custom field value:
  
  < parseDate (wfCurrentGet ("lastEntryTs")) $if < $ dateCurrent (-7) >
  DO SOMETHING
  < $endif$ >
  
  I guess that dateCurrent-(7) will have to use my value of token instead of the value (-7)? But how can I configure the token for the date (I know how to user) and how to get here?
  
  Thank you very much!

  It would not be a token, but just a reference to the field that contains the date value. Assuming that your custom date domain name is "xCustomDate", something like this should work:

  <$if parsedate="" (wfcurrentget="" ("lastentryts"))="">< parsedate(#active.xcustomdate)$="">
  DO SOMETHING
  <$endif$>

• problem in the basic workflow

  Hi all
  I am new to oracle content management workflow. I went to the admin of workflow in applets admin in Administration tab in the left navigation. I chose the workflow and added the new workflow with the name. I chose the ID of the content. I selected the user add and selected user.
  Now, I chose as follows. I gave the name of the step. I chose the user can see the current version. I chose the user by examining the content name (this is the user that we created to review the permissions). I chose the OK.
  
  When I start the workflow, it now shows the status active.
  
  Now when try to open the Site Designer, when I try to preview the page, it's show error in the content server.
  The end web directory "(null)" dispersion for the start-up ' documents' directory is not found in the path "/ idc/groups/public/documents/id_w_corpdevelopment ~ 6'."
  [Details]
  intradoc.common.ServiceException:! csFsMissingDispersion, (null), documents, / idc/groups/public/documents/id_w_corpdevelopment ~ 6
  in sitestudio. SSFileServiceHandler.doGetPageError (unknown Source)
  in sitestudio. SSFileServiceHandler.getPage (unknown Source)
  at sun.reflect.GeneratedMethodAccessor15.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:195)
  
  
  So take it please and advise me.
  I think that we must open a session to examine the content and read it again. Am I wrong?
  
  If you have documents or links on the basis of the Oracle Content Server workflow, please share with me.
  
  Best regards and thanks,
  Nirmala Vijaya Sekhar Varre

  http://download.Oracle.com/docs/CD/E10316_01/CS/cs_doc_10/documentation/Admin/workflow_guide_10gr3en.PDF

  Here is the link to the documentation for workflow

• The workflow step (approve Action) Service custom Java and "pass params".

  Good afternoon, fellow coders!

  Normally I research and proof of concepts until I find a solution, but given the great deadlines, I don't have the time - so I need your help.

  I try to have an Action to approve Workflow (idocScript output Workflow event call) to call a custom component (Service of Java) AND 'pass' a sort of parameters (bare minimum dDocName)

  In a perfect world, it would be as simple as: processContentInfo (String dDocName, String xMyCode1, String xMyCode2);

  But since I called the Java Service of idocScript (via executeService) I can't skip params through the API.

  Is there a simple way to do this?

  It seems that if you can not skip params you could put at least in the managed container (m_binder) and just know to look on the side of Java via some DataBinder as m_binder.getLocal)

  Am I missing a simple idocScript function that will allow you to do this?

  Note: I'm NOT running the Service from a URL so normal? param1 and param2-> m_binder.getLocal solution is not good.

  In addition, book of Bex warns on the Classes of Service not easily 'be able to call other Services of the University Complutense of MADRID'...  My Personalized Service must do exactly that (and JDBC and other things). Is this really a problem?

  Looks like I've got dDocName I could use CRMI to hit what I want, as long as I know how to use a binder, etc. - is there a mystical shade that prevents this?  Or he just said that it is difficult, UNLESS you know RIDC?

  Quality all advice is appreciated!  And please, try to give me an answer detailed as opposed to something vague like 'try a Service Manager', I need something that I can digest quickly.

  Thanks in advance!

  You can set parameters for the service call by defining Idoc Script variable before calling executeService.

  <$dDocName="TEST12345"$>

  <$param1="09876"$>

  <$param2="ABCDEFG"$>

  These variables are then available via the DataBinder service.

  Here is information on how to run a custom component service. Avoid any question doing this.

  http://www.redstonecontentsolutions.com/5/post/2012/05/executing-a-service-from-aservicehandler.html

  http://jonathanhult.com/blog/2012/06/execute-a-service-from-a-Java-filter/

  Jonathan

  http://jonathanhult.com

• Basic workflow questions

  I have several videos (.mov files) and photos that I would like to string together into one video.  I will also add an audio track and a few alterations, which will mainly be text that introduces the next section of the video.  If it wasn't for the text, I would probably all in first but I do not know what way to go today.  What type of workflow would be better to achieve this?

  If you add only simple text, and you are familiar with the first, then I would just do the first work. If you are looking for a more complicated for the text effect, or you want to use After Effects for some other reasons, the workflow (Simplified) would then involve:

  • import of assets
  • creating a publication
  • sequencing of the asset within the chronology of this composition
  • Add your text layers (animation as needed)
  • rendering
  • compression (if necessary)

  If you're new to After Effects, check out the blog of Todd on some tips on putting on the road.

• Basic workflow

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/PremierePro/CS/using/WS4C20B718-E29E-41EE-B3D0-0CD37A1D94F7.ht ml

  "After you've left the new project dialog box, the dialog box new sequence will appear."

  In CC, it does not appear after starting a new project.

  Either go to file / new / sequence or

  Drag an item from the project window in the new icon.

  An interesting feature request would be to drag a clip from the PW in an empty timeline (no sequence) as AE.

• Basic Workflow question

  Hi All-

  I would like to build a presentation of EI who looks that you are walking/driving on the road and images/pictures/text appear on billboards like you to walk/drive to.

  I'll start as simple as possible, but would eventually like to produce something which I think is a pretty common effect with depth, moving through or beyond the objects in 3d space, adding and moving the camera, etc..

  This type of effect/presentation goes by a name or a BOM? I'm not having much luck finding online tutorials so I don't know that I'm not looking for good things.

  I am running After Effects CS5, Flash CS5 (if necessary), and Zaxwerks ProAnimator. I am a nOOb on the implementation of the real world, but have experienced many hours of training. If another product (s), it would be easier, I would appreciate that information as well.

  Thanks in advance,

  Rich

  > you have suggestions for resources to help me understand the EI 3d world?

  Start here:

  "Overview of the layers 3D and resources."

  > I'm under AE CS5 and there only seems to be too many books on.

  You don't need a book to After Effects CS5-specific. The 3D features have not changed in recent versions of little.

  But there is already a version of a book excellent chapters CS5 3D:

  http://blogs.Adobe.com/toddkopriva/2010/06/creating-motion-graphics-with.html

  I recommend early:

  http://blogs.Adobe.com/toddkopriva/2010/01/getting-started-with-after-EFF.html

  BTW, you can find much of this information. How to search:

  http://blogs.Adobe.com/toddkopriva/2010/05/How-to-search-for-after-effect.html

• How to get the user name in a workflow?

  I have a simple request of what appears to be a basic workflow step.
  
  I create a workflow that has the user approve/reject their own review as the first step of the workflow. My question is, how do I get the username of each document as it comes in the workflow?
  
  I read on wfAddUser. If that's what I use, how to use it and where I can add it to the Workflow screen?
  
  Thank you.

  I don't know exactly what you are after all in a row. You want to get the original author?

  The document is checked and the user name is registered. It is the only name available at the moment where the document to enter the workflow, which would be the only user attached to the content so far.

  have you tried looking at the dDocAuthor variable?

• criteria - between steps workflow

  Hello
  
  I have a workflow of criteria with two documents linked together (with a custom component). I want that they to be approved together.
  A single document may not leave the step without the other.
  How can I send one of them, after having been approved by User1 in a 'pending instance /' State (or at least remove it from its 'Worklist Assigments"), somewhere between the steps.
  I want the document go "worklist disposals" of the User1, but not in user2 'disposals Wk", until that the second document is not approved by User1.
  Is it something like dStatus = 'pending' in the basic workflows?
  
  Can someone help me pls?

  One thing I did in the past to use the additional output of the additional update event (code) criteria or conditions to maintain the docs in place until I want them to move.
  I could do something like this:
  (1) create a file companion to act as a flag variable indicating when it was approved.
  2 because the update event is evaluated in the case of a writing of approval one event script looking for a) b) if the event approve find controls for all of the other constraints - as a linked document which has not yet been approved) c defines the indicator "I was approved.

  In your example, Doc 1 is approved, but the condition of additional output research flag "I been approved" for himself AND he has linked the file, Document2. When Doc 2 is approved additional code output condition sees that the Doc 1 AND Doc 2 have been approved and allows them to move forward.

  It is best to think of measures of workflow as logical containers rather than sequential events. Using logical leap, you can trigger the movement (flow), documents in any container you want and the conditions that you specify (for example, only when my linked file is also approved).

  I hope this helps.

• How to return to the previous step in a workflow to void?

  We call a workflow under an approval action in a main workflow. In the child workflow, we have 9 steps. If at any stage in the child (other than the first) workflow user rejects action, workflow control should return to the previous step in the child workflow itself.
  
  We have added a custom action in the output of all stages of children workflow events. This is the logic of the output of step 4 of the child workflow event. A similar logic is there for every step of the workflow of the child.
  
  < $if wfAction and wfAction as "REJECT" $>
  < $wfSet ("wfJumpTargetStep", "Step3@childWF") $>
  < $wfSet ("wfJumpEntryNotifyOff", "0") $>
  < $endif$ >
  
  With this code when the user made the rejection of the child workflow action, it takes us back to the main workflow and not to the previous step in the child workflow.
  
  This approach is correct?
  
  -Pratap

  1 3 events are input, output and set to date.
  2. rejects arrives in the area to update but you can not reliably respond it because to reject it, he leaves immediately (don't not through the exit event).
  3. the rejected content goes to the rear in the workflow step by step (even going back to the main workflow in a workflow sup) until he finds a step that has valid editors (not only reviewers).
  4. If it does not find a Publisher he goes all the way back to the step of automatic Contribution at the beginning of the workflow and is in a kind of no mans land until the donor (or an administrator) will and approve it again.
  5. to check if something has been rejected to the input of an editor event stage BEFORE the stage where it is rejected needs to have the code to check the status of rejection.

  The workflow under should be able to capture dismiss it as you wish. All the steps in the child are steps only workflow (workflow sup)? Or maybe the people in the steps do not have RW access to the document? This is what I would predict with your described symptoms.

• Categories of attachment for the OKC workflow

  Hi all

  I'm having some trouble with the variable #Attachment to the workflow, I created the attribute local #Attachment who call the attribute of the element with the following constant:

  FND:entity = OKC_CONTRACT_DOCS & pk1name = BusinessDocumentType & pk1value = - & contract_type - & pk2name = BusinessDocumentId & pk2value = - & CONTRACT_ID - & pk3name = BusinessDocumentVersion & pk3value = - & ATTACHED_DOC_VERSION-

  up to this point, all right, but when I run the process, there is that one attachment (should be three), after some research, when I checked the attribute to 'Update of the attributes' values he gave me:

  FND:entity = OKC_CONTRACT_DOCS & pk1name = BusinessDocumentType & pk1value = - & contract_type - & pk2name = BusinessDocumentId & pk2value = - & CONTRACT_ID - & pk3name = BusinessDocumentVersion & pk3value = - & ATTACHED_DOC_VERSION -& categories = OKC_REPO_CONTRACT, OKC_REPO_APP_ABSTRACT

  
  

  My question is, where can I replace/find these parameters of the categories?

  Thank you

  Adelmo

  After some research, I found the thing that became troubled.

  A basic workflow procedure OKC_REP_WF_PVT.initialize_attributes was setting this attribute point with these categories above.

  The categories are:

  OKC_REPO_SUPPORTING_DOC

  OKC_REPO_CONTRACT

  OKC_REPO_APP_ABSTRACT

  OKC_REPO_CONTRACT_IMAGE

  To change the value of this attribute, I called a step in the workflow that would set the value of this attribute as I wanted

• More simple workflow possible cut pieces of video and video filling in first

  I'm looking for the workflow as simple as possible cut out pieces of a video and video filling in first. I am a novice, so I'm not so familiar with the software.

  Basically I have a subscription to the first (cc version) purcased since it is able to manage any video format. I may have a few images of the GoPro video taken from screenshot software, something taken with a video camera, etc. Although the video contains parts I want to throw. I need to quickly cut that out and trom it.

  I'm looking:

  How to mark a part of a video. That cut.

  Mark the beginning and end of a video. That cut.

  Export the video as a MP4 file or another file format which reads easily on a Windows machine with good quality.

  I want to use keyboard shortcuts as much as possible.

  Looking forward to your expert advice.

  There are two basic approaches, with multiple ways to accomplish each. I'll limit to a single workflow for each approach.

  APPROACH A: only inserting the segments you want from the Source monitor in the sequence

  1. Double-click A Clip to load it in the Source monitor
  2. In LUN Source, use the JKL keys to rub to the first image of a segment you want to use.
  3. Press I to develop
  4. JKL in the last image of the same segment
  5. Press O to set the point
  6. Press, [comma] to insert in/out segment in the timeline (see below for a note on the creation of a sequence)
  7. Repeat steps 2 through 6 for other segments of the same clip.
  8. Repeat the foregoing for Clips B to Z

  B APPROACH: By cutting out segments you don't want the sequence

  1. Add Clips A to Z of a sequence in the order you want to run
  2. In the timeline panel, use JKL to rub the last image of a segment you want to cut.
  3. Press O
  4. Press (quote) to "extract" (cut the defined segment and the gap) [not required to Point to the first segment because first will assume that frame 0 is the entry point...]
  5. JKL to the first frame of the next Segment to be cut
  6. Press I
  7. JKL in the last image to cut out
  8. Press O
  9. Press on '
  10. Repeat for the rest of the content of the sequence.

  These workflows is for on the simplest possible sequence: a series of clips on the same track (i.e. no compositing superposition or Picture-in-Picture) with all the sequential clips the clip a source, then another. If you want to have several layers or cut Clip a to B new Clip in Clip, then things become more complicated.

  As to the sequence, since you work with the contents of a series of cameras, you can have clips of different resolutions (SD, HD and even Ultra HD). In this case, you must decide what sequence parameters to use. You usually get the best results by setting the sequence to match content with its very small dimensions, then reduce other content at your leisure; Scaling up generally returns the quality degradation.

  While you might start thinking you're doing a very simple mounting, the complexity is almost sure to grow, in order to invest in the time to become familiar with the basic workflows will pay dividends. Here is a good starting point: How to create a video with Premiere Pro | Adobe first Pro CC tutorials

• Need to activate the workflow on check-in

  Hello
  
  I made a custom control in the page on my web site. Now, I want that whenever the user checks the document in a workflow, but I have no idea on how to apply it.
  
  Appreciate any kind of help as soon as POSSIBLE.
  
  Thank you
  Abhijit

  You must use a workflow of criteria and not a basic workflow.

  Create a new workflow of criteria in the workflow Admin Applet
  Choose the criteria - for the purpose of the test to choose a security group, check the definition of criteria, and then specify the criteria.

  For example, you can set the Group of public safety criteria and content type is 'Document '.

  Add steps / users to your workflow
  Then you must enable the workflow.

  Whenever you are looking for now in a 'Document' in the Group of public safety, he will enter this workflow

  Tim

• Add new documents to the Workflow Runtime

  Hello

  We have a requirement to add more than a few documents to a workflow by the examiner running instance before approving it. The next workflow step would see the original document, but also new documents added in the previous step. is this doable OOTB Configuration?

  Concerning

  Srinivas

  Yes. For more information, see https://blogs.oracle.com/fmwinaction/entry/oracle_bpm_adding_an_attachment