More simple workflow possible cut pieces of video and video filling in first

Similar Questions

• HP6500A more: top of page cut off when printing and copying on HP 6500 a Plus.

  My printer has recently begun systematically cut the top of the page when I copy or print from my computer.  I searched the site for possible corrections and have checked all the firmware/drivers and all are up-to-date.  So far, none of the suggested corrections seem to do anything.  New ideas or known problems?

  HI -.

  I'm not a Mac guy, but it may just be a power problem, where the rolls are not picking up the paper correctly.  First thing to try is a test page.  If she clips the top as it does in the other pages, I will try following the steps described inthis document to clean the rolls of selection.  If the test page prints correctly, it may be something to do with the printer driver or software, or a combination of both, in which case I hope one of the Mac experts on the site can ring in.

  Hope that helps.

• Is it possible to display a video in a video?

  Is it possible to view two videos at the same time in FCPX?  For example a "display in a screen?

  I'm showing the action and someone explaining the action at the same time.

  Instead of having a physical screen beside the person (who does not work because of the flickering light) talk, I want to insert a brief appearance of a screen showing the action in the real video, next to the person talking. Or have the person who speaks in the "TV screen" insert a little in the part of the main action of the film.

  Is it possible; and if so, how?

  Yes.

  A place above more and reduce the top.

  Al

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• simple workflow to open a custom service

  I'm tring to make a simple criteria workflow to call a custom service and am getting an error that I don't know how to solve problems. I have a beautiful SR, but unless the error is considered to be due to a bug I won't be able to count on much help. Installation: Service A) created and tested HELLO_WORLD_SERVICE which simply displays a message in the log - via SystemUtils.trace ("system", message); ((B) not created criteria workflow - no required user interaction, just run the service name: paul_test_01 criteria field: comments of value criteria: say hello C) added the name of the only step: checked dit_bonjour: users can view the revision to the current address users tab: adding Token WCWorkflowApproverUserToken terms of output tab: checked: reviewers at least as: 0 events tab : entry Edit-> custom tab: added following script: I then chose the Test tab for the properties of Script and chose a piece of content with comments to 'say hello '. When I choose "Test Script", I get the following: StatusMessageKey =! csWfScriptTestExeError! csDynHTMLArgumentMessage2, 3! csGrammarParserNoOperatorToCombine script execution error: an error occurred in assessing: Offset in the assessment of execution is 3. No operator present to combine grammatical elements. Does anyone have an idea how to determine the cause of this error and how avod it? Alternatively, if anyone has the steps explicit to do this, it would be welcome! Thank you, - paul

  executeService idoc works only the name of the service takes as input param... something else must be defined in the workbook before calling for service.

  <$param1="foo",param2="blah blah"$="">

  <$executeService("HELLO_WORLD_SERVICE")$>

  <$wfExit(100,100)$>

  You must not set dDocName... it is already available in the workbook.

  may I know what you're trying to make using executeService in the workflow.

• Is it possible to move the video of a prelude to another project?

  Is it possible to move the video of a prelude to another project?

  Hi Lekepistol,

  Thank you to try prelude workflows.

  Prelude working with one project at a time. He cannot communicate between different projects. You just need to close the current project, open the other and ingest the file to use.

  Customer feedback is important for us to improve the workflow and functionality. We are working hard to implement the features desired among our products.

  Please fill out the following form with accuracy. We will discuss the suggestions.

  Feature request/Bug Report Form

  Thank you

  Mayjain

• is it possible to record a video without rendering (like virtualdub direct copy flow)?

  Hello

  I have an avi video, I want to cut a part of the video

  so is it possible to record the video (with the part I want to cut) in "direct stream copy"?

  in record short without making it once again

  for example, I use windows 8.1 and virtualdub and avidemux can record video without re-encoding (rendering)

  VirtualDub is enough copy to selet for video and audio live stream

  

  and in avidemux just select the video and audio copy

  I can do with first cs6 or cc?

  Thank you

  Which varies from format to format. With MXF OP1a, there is a checkbox "Enable Smart Rendering codec." In all other cases I know, smart rendering is done automatically - if (and it's a pretty big "If") the content of the source properties, the sequence settings and export settings are all aligned.

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?

  At the moment the iCloud synchronizes only with what is already on my iPhone.

  This article should help you remove photos from my photo - Apple Support stream

• I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  Yes.  The frame rate (and resolution) of a project is determined by the first clip set a new timeline for the project.  So put a clip known 30 fps (with the resolution you want) in a new project timeline then copy everything from your existing project in the new project.  You can then remove the first clip if you wish.

  Geoff.

• Satellite L20-149: is it possible to replace the video card?

  is it possible to replace the video card in my laptop L20-149?

  because I can not play on my video card intel because its slow and boring... don't worry not about the warranty because its not valid anymore

  No, it is not possible to s.
  Why? I could list several points why it s not possible, but this question was asked several times in this forum.
  He just use the Toshiba advanced search forum and search for updated graphics card.

• Satellite A200 - its possible to change my video card?

  Hey,.

  I was wondering if its possible to change my video for a better card. I currently have the nVidia GeForce Go 7300 and its an integrated video card.
  But I don't know if this means that it is impossible to change it or maybe its possible to add an extra video card in the laptop (SLI).

  So is there anything I can do about it?

  No, because the GPU is soldered on the motherboard. Not possible to remove it!

• Data execution prevention-window Explorer error when I try to access the windows Explorer, and more particularly when I try to watch videos.

  Original title: data execution prevention-window Explorer error

  Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!

  This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.

  But 6 days of inactivity and a link to an article of a MSE = automatic response.

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Is it possible to put a video during running on the app or an image?

  Is it possible to put a video during running on the app or an image?

  You can't put a video instead of the boot image.