BB10 dev unit alpha has not started

Similar Questions

• Flash on BB10 Dev unit Alpha crashes!

  I tested the photo BB10 Dev Alpha device API, whenever you select the FLASH on the camera, it hangs, is this limited to my device or other?

  Please test this feature on your camera and get back on the result.

  Kind regards

  This is a known issue:

  https://Twitter.com/xitijpatel/status/271411654435172353

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Get an error "unable to locate component: this application has not start becauseATL100.DLL is not found" when connecting to internet

  * Original title: ATL100. DLL PROBLEM

  Please help me I am disabled and do not know much about computers. I just tried to connect to the Internet and there was a connection problem. The message came from mcagent.exe impossible to locate the component: this application has not start becauseATL100.DLL was not found. Reinstalling the application may fix this problem. I have no Internet and I don't know much about computers. I need my pc to take care of me, it's my connection to the world. Please help me. I also continues to receive a message from McAfee that my computer is in danger (real-time scanning is disabled)

  Delete all McAfee software! Then it will not work! Then reinstall the McAfee software. I had exactly the same problem: during the process of removement, I have immediate internet access... Good luck!

• Aironet 2802i Radio0 has not started, not enough power POE on SG300-28PP switch

  When I restart Aironet 2802i which is powered by 28PP SG300 28 - Port Gigabit PoE + switch, I saw the following message:

  [* 13:47:31.8044 26/09/2016] Radio0 has not started, not enough power POE
  [* 13:47:31.8173 26/09/2016] DOT11_DRV [0]: set_channel channel set to 11
  [* 13:47:33.0109 26/09/2016] DOT11_DRV [1]: set_channel channel set to 36
  [* 13:47:33.6506 26/09/2016] Radio1 not started, not enough power POE

  Series Aironet 2800 get started guide mentions "any 802.3at (25.5 W) compatible switch port" and SG300-28PP seems to be consistent.

  Please advise, thank you.

  Dennis

  Oh sorry, I got a 2602 in my head, but you use the built-in WLC? I have not had the chance to play with those, but assumes that it will be the same.

  Try to display the summary ap and ap 802. 11A of summary config

  See you soon,.

  Ric

• get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  Original title: Windows Media Center

  Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

  Try this for me:

  Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

  If this does not work, try this:

  1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

  2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

  4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

  5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

  6. RESTART. It will not work until you restart your computer.

  7. Open Windows Media Center and see if the problem is resolved.

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• Downloaded & instaled DC Pro... click on the launch button, but has not started. Installed MGP checked and it has not installed.  Suggestions?

  Downloaded and installed DC Pro 30-day trial.  After installation, click on the launch button, but has not started. Installed MGP checked and it has not installed.  Suggestions?

  XP is not compatible with acrobat dc.  You must win 7 or better, system requirements | Adobe Acrobat Pro DC, Acrobat Standard DC

• Downloaded for free trial Illustrator. Said the trial took end. Hey! He has not started! What the devil?

  Downloaded for free trial Illustrator. Said the trial took end. Hey! He has not started! What the devil?

  This is how Adobe gives free trials? I have nothing. How can I contact Adobe for this actually correct?

  It's not the end of the beginning, he never started. None of the listed reasons were involved. He said even that the download was successful. Thank you for answering, Ned. I will not, of course, buy Illustrator now, I had planned to do. Bad on you Adobe!

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Equium P300-16 t has not started up - now asking for Bios password

  Hi everyone, I hope someone can help.

  I have an Equium P300-16 t.
  First it wouldn't start, just the media & power led lights.

  Found that the upper ram module no longer works.
  With only of ram in the computer laptop lower slot will start. Test different combinations of modules, but unit will not start with the lower module filled.

  At least it starts I thought, but now after the toshiba screen, I now get a screen asking me a bios password.
  Research on the web, I see that it is a random problem.
  The unit is out of warranty.

  Any suggestions please

  Thank you
  FIA

  Hi mate

  Unfortunately, it seems that the laptop calling you the BIOS password (don't know why) who is not known to you
  In this case, you should ask a technician using ASP.
  The guy was able to remove unknown BIOS password by using a special procedure.

  As far as I know it of not possible to remove unknown BIOS password without help from ASP.

  Good luck

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "Windows has not start because the following file is missing or currupt.

  Original title: System 32 error

  I have a netbook and wen as its turned on it just comes up with windows could not start because the followingfile is missin or currupt and askin and then reinstall how can I do this wth on a hard drive

  Hi Amandapowell,
   
  Try the steps listed in the following article and check if this can help:
  How do I recover from a corrupted registry that prevents Windows XP startup

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• "Windows has not start because the following file is missing or damaged: \windows\system 32\config sys\ you can try to repair this file by starting windows using the original Setup in place the CD ROM.

  This problem occurred when we had a short break this morning.  How can I use a CD when the computer does not start?

  Thank you!

  This problem occurred when we had a short break this morning.  How can I use a CD when the computer does not start?

  Thank you!

  Firstly try to get the menu Advanced Boot Options by pressing F8 repeatedly while booting.  See if you can boot into 'Safe Mode' or 'last good known Configuration"before trying the method described below.

  If you have a Windows XP installation CD, instead of a CD of "recovery" provided by a computer manufacturer, you configure the BIOS of the computer to boot from the CD, put the XP installation CD in the drive, start the XP Recovery Console and go from there.

  See below for detailed instructions: http://support.microsoft.com/kb/307545

  There are several caveats to this method.  Read the article.