BBM SDK Apps appearing does not in the sim card

Hello everyone.

1. I have install MDS, installed the sim card

2 Ran 2 simulators using sim1 and sim2.bat.

3 added sim2 and sim1 BBM contact,.

4. in Eclipse went to debug, dug configurations, Blackberry Simulator, advanced

Added to this that my custom comand line:

"C:\Users\Adminy\AppData\Local\Research in Motion\BlackBerry Smartphone simulators 7.0.0\7.0.0.236 (9900) \fledge.exe" / app = Jvm.dll / Pocket = 9900/session for partner = Sim1/app-param = JvmAlxConfigFile:9900.xml/data-port = 0x4d44/data-port = 0x4d4e /pin = 0x2100000A/app-param = regVersion = 3 /app-param=regDestIP=127.0.0.1/app-param = regDestPort = / app-param 19781 19783/app-param = DisableSyncServiceRecord = regSrcPort =

This my dir of custom work:

C:\Users\Casey\AppData\Local\Research in Motion\BlackBerry Smartphone simulators 7.0.0\7.0.0.236 (9900)

And this as my MDS directory custom:

C:\bbmsdk\MDS Simulator\mds

But when I try to debug the example applications that they are not appearing on the Simulator. Any ideas?

I received the responsible tic tac toe sample but now when I run it it says "BBM is not available", but when I run the two simulators can I use BBM back and forth between them. Any ideas?

Tags: BlackBerry Developers

Similar Questions

  • 5 c does not recognize the sim card

    I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

    What is the error message you get?

  • T440p - Ericsson N5321gw does not recognize the SIM card

    Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!


  • Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

    Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

    I Don' t know what to do, help me please

    You get an error message?

    What did he say?

  • Does not recognize the sim card

    Hello

    . REF 1730461N. Problem Acer A1 8-11 do not recognition of sim card. have seen my cell your providerEE .not only it does not recognize my SIM EE also, it does not recognize t orange o2 vodafone mobile. Can you advise me on what to do next?

    Yours sincerely

    PS Can you let me know what to do now thanks

    Larry M Goff

    Actually, Phil, the system would be came carrier, with specific software for a specific SIM carrier carrier.

    If you then change the SIM card to another carrier and having problems to make it work...

    It's always a problem of carrier.

    All THE problems of card SIM and the carrier specific software are supported BY THE CARRIER, and not by Acer.

  • iPhone 6 does NOT read the SIM cad

    Suddenly after serving more than a year our 6 Iphone does NOT read the sim card. Area of the sim card from the iPhone 6 to our iphone 6 plus the card works well. And the sim card in the iPhone 6plus does NOT register in the iphone 6. So I guess that it is a mistake in the iPhone 6. We think the 'operator' menu item is generally absent in the iPhone 6. Anyone in the community has a solution this problem of reading.  The two IPhones are updated to IOS 9.2. Thank you

    my best bet would be the connector which connects with the sim tray is default

  • Droid X 2: doubleTwist player does not read the SD card

    (And NO, I'm not talking Desktop App... the app works great and sync to sdcard_ext very well.)

    Someone else had this problem? He is the only player who does not see the SD card. I'm trying to convince developers to doubleTwist, that's THEIR problem. They have so many users pass through hoops to describe their problem and give them details without actually solving the problem. It is approximately 7 months since the first issue has been reported to them. And of course, most of the users are deserting a ship and ask for refunds.

    Any thoughts?

    There is something about the fact, however - after using about a dozen media players, that's really one of the only media players I found the sdcard_ext problem. I went to PowerAMP and I love it.

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • My billing address does not match the credit card, as I entered. But I'm sure that I wrote the correct address to 10000%. Is this some kind of error?

    My billing address does not match the credit card, as I entered. But I'm sure that I wrote the correct address to 10000%. It's some kind of error? @

    Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

  • Portege R700 - Autocad 2011 does not recognize the graphics card

    Hello

    I have toshiba Portege R700 with 64-bit win 7 installed.
    I need the computer for use with autocad 2011.

    For some reason any auocad does not recognize the graphics card installed on the computer.
    I suspect it because very little memory is allocated for the graphics card.

    How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

    Thank you very much!

    Hello

    What Portege R700-xxx you have exactly?
    As far as I know the graphics memory cannot be assigned manually.
    Everything is controlled by the graphics driver and you have no influence on this

    You can try updating the graphics card driver maybe it would help.
    The most recent driver found on the page of the European driver Toshiba
    If not, you should check the manufacturer of the graphics chip driver

    Good luck

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • X 220 does not detect the wwan card

    My X 220 does not detect the wwan card ("WWAN MSC PRTSWWAN RDY FUL" in the parts list). No section of modem in Device Manager, without any question related to the wwan card. Please someone help me, how to make my OS (Win 7 Pro x 64) can detect the wwan card?

    1.17 BIOS can detect, it worked normally.

  • Computer does not detect the pci card

    Hello
    I have a dell dimension 4550 pc, with windows xp professional service pack 3.

    I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

    What can I do to make the computer detect the new card?

    Thank you

    It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

  • An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

    Original title: peripheral equipment

    An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

    Thanks for your help.
    Christine.

    Hi Stefano,

    Thanks for posting your question in the Microsoft Community.

    This problem can be caused if the SD card is damaged or the card reader may not work properly.

    1. What is the brand and model of the SD memory card?

    2. What is the number of the model of the Packard Bell laptop?

    3. you receive an error code or the message after inserting the SD card into your laptop?

    4. have you made any recent hardware or exchange of software on your computer before the show?

    5. have you tried to insert different SD card in your laptop?

    6. have you checked the SD card in another computer?

    7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

    8. is the specific question to a SD card or any type of cards?

    9. are you able to detect the SD card in the Device Manager?

     

    Open the Device Manager:

    http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Open the hardware and devices Troubleshooter:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

     

    For reference:

     

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Moto Q does not recognize the memory card

    I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

    With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

    Thank you

    Jason

    Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

Maybe you are looking for

  • Drive HARD and RAM upgrade on S2410-504

    Hello 1st visit to the forum, I hope you can help. I have a Satellite S2410-504, and the 20 GB HARD drive has stopped working completely. I thought that if I had to replace the drive, I might as well have a larger capacity drive. Are there specific r

  • Qosmio F50 - 108 b - issue of upgrade hardware

    Hello! I have the Qosmio F50-108 b. I am considering buying the new processor for my pm45 chipset, but I can't find information about my support for the cpu bios. I stopped the Q9100... its very very fast. The chipset support, but what the BIOS? I th

  • How can I save the image of Android 2.1 on my phone without my warranty is Sub?

    Please help me save the image of Android 2.1 on my phone without my warranty is empty... His Milestone A853 I own... Also, can I use a custom without the guarantee ROM is Sub?

  • Unable to download itunes on windows vista

    I'm unable to download itunes. I tried run and save options but always stuck when download is completed at 39% and not more progress?

  • Hard Drive failed after 1 month

    Hello 1st time post sorry if this isn't in the right section. I bought 2 hard drives at Amazon for my NAS box there is a little more than 1 month and 1 disc is now dead and the other shows errors, when you contact Amazon they advised that I need to g