Be difficult to adapt the computer to monitor

Similar Questions

• Wireless adapter fails - then the computer crashes.

  I've had this problem for a few days now. Basically, the problem is that my computer freezes completely and it becomes unresponsive at random times. It happened while I watch videos, play games or surf the internet, even while I'm on the login screen.

  I have recently noticed that just before the accident, strange things happen that seem to be centered around the wireless adapter. I'm not going to load a Web page, so I'll check the icon wireless and see that I'm connected to the network, but not internet. And then, as I try to disable and re-enable the adapter, the computer will crash.

  I just downloaded the drivers from the adapter and install them, but that has not changed anything.

  Anyone know what could cause this weird problem?

  Thank you.

  PS:

  Just happened twice again. Failed loading of Web pages, and who warned me that something was up. I unplugged the adapter, the operation aboard as usual for a while, but the computer does not save the adapter has been unplugged and continued to try to load web pages for a few moments, before it crashes.

  The first time, he had a BSOD, but he flashed to the top for a while before the computer restarted itself.

  Adapter is TL-WN722N

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
  
  There could be various reasons for gel as a third-party program, modules, the origin of the problem of the computer.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  (2) If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• How to make the computer to recognize that there are 2 monitors?

  I have a new hp pavilion hpe h8-1124 with AMD Radeon HD 6570 GPU.  It does not have a VGA port, so I used the adapter supplied in the box HP (DVI / VGA).  To get to two monitors, I used a VGA 2 VGA splitter 'Y '.  Both monitors turn on and show the desktop, but when I use the Windows screen resolution (7 professionals), to stretch my office, the choice of two screens are not present.  Using the button detection detects only a single monitor which is names @.  Using 'Identify' places '1' in each monitor.  When that I start with a single monitor, "detect" correctly identifies appointed monitors.

  How can I get the computer to recognize the fact that there are two different monitors?  If I can't do this, I can't do the rest of what I need to stretch the desktop on two monitors.

  Hello

  Get rid of the VGA splitter.  You have noticed it doesn't work for the Office of 'cloning', but do not stretch across two monitors.

  What are the other ports on the video card?  without doubt, DVI, HDMI, and VGA if this is correct, then one of then one of the monitors must use DVI - D or HDMI if you want to continue to use the VGA for the other monitor.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.

• Tecra A9 - external monitor shows scratches during the use of the computer laptop pluged.

  Hello

  I heard at least Tecras A9 product witch scratches on the external display only 3 when the laptop is pluged. When you use the laptop with the battery, the monitor works fine. they tried to divide the monitor and power cables as far as possible, but still the same problem. When you use the laptop with a non-toshiba-AC adapter, the external monitor works fine.

  Hello

  In my opinion, you should visit the nearest Toshiba authorized service provider. They can plug in your Tecra external monitors and test. If the result is the same, I am sure that you will get free AC adapter replacement.

  Do not wait and discuss the days here. Contact with them and I hope they help you.

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• Monitor says no signal after moving the computer

  need help to make the monitor iluminate

  My windows xp is just moved to another room with a new distance map and functioning. After the move, the monitor says no signal! The computer and the monitor seems to work but the screen goes black after showing NO SIGNAL and goes to sleep.

  One step at a time.

  Also, I would also like to make these windows xp and windows live units communicate with each other in my home group.

  Bill enjoy life

  Hello

  I suggest you to check the physical connection that is connected to your computer?
  I suggest you to follow the steps and check.

  No input Signal message.

  Cause

  This problem may be caused by one of the options below.

  1. Monitor not connected correctly.
  2. Faulty hardware

  Solution

  Monitor not connected correctly

  Verify that the monitor is connected to the back of the screen, as well as the back of the computer.

  If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.

  Faulty hardware

  If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

  The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

  Hello melissacrowley,

  1. you have the latest drivers installed for the graphics card on your computer?

  I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TC-105 acre, computer and monitor S230HL. No sound via the monitor. Can get with headphones

  TC-105 acre, computer and monitor S230HL. No sound via the monitor. Can get with headphones strangely. Do I need speakers or is it a parameter. Have tried different audio settings with no luck.

  on Acer website:

  http://us.Acer.com/AC/en/us/content/model/UM.VS0AA.A02

  No speakers on this model.

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps