beeps then was my pirate computer?

Similar Questions

• Cannot scan pictures more. I clicked on the icon for HP Deskjet and then was able to choose "Scan Doc or Photo". This option is no longer

  Have not analyzed the photos for a long time.  When I did it before, I clicked on the icon for HP Deskjet and then was able to choose "Scan Doc or Photo".  This option is no longer.  Need help.

  If you use windows 7, start menu open then choose "all programs" and find "windows fax and scan" and open > then go to the lower left choose scan and then in the main menu, choose "new scan".
  or you can watch this video

  scan a document or photo with windows fax and scan

  "If your scanner is not connected or you have a problem with the driver is the message"
  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer, and then try again.
  For more information about adding or troubleshooting scanners, see Help and Support
  "

• While I was on my computer Vista, the unexpectedly extended screen

  While I was on my computer the screen just suddenly expanded so I minimize to be able to get the arrow to the left. What can I do to get back to normal?

  * original title - why the image on my screen all of a sudden stretch or expand *.

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  or try this

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

• Internet security problem - I got a security alert was attacking my computer or filtered in and I could not access the internet

  Yes, all of a sudden, I got a security alert was attacking my computer or filtered in and I could not access Internet, I advocate for window / malware scanning and also, mcafee for extra security, but it happens still., why? Then a few days later, I was able to get on the internet again, only about 2 days, now I can no longer access the internet, Iget, open with file, message, so I guess I have to reinstall internet explore, some of my applications are not running, but I think that their always there.  I have scan Windows / Defender and mcafee installed and running on my computer, so what's the problem here?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• Computer gives an error on IPCap.exe two or three times and then shuts down my computer

  Original title : ipcap.exe

  I get an error message on IPCap.exe and it will close. He would make 2 or three times and then shut down my computer.

  Any suggestions?

  Hello

  • What is the exact error message that you receive?
  • What were book them before the problem started?

  You can view these methods:

  Method 1:

  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:
  I also suggest you to verify the issue in the State of clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Start and then click Run.
  2. Type msconfig and click OK.
     The System Configuration Utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When you are prompted, click on restart to restart the computer.

• I was using my computer as a default administrator, I did another administrator account but I lost my old account that has gots my data all pls help me as soon as possible

  I was using my computer as a default administrator, I did another administrator account but I lost my old account that has gots my data all pls help me as soon as possible

  The system hides the built-in Administrator account on Windows XP Home Edition when you create a second administrator account and she is only available for use by visiting Mode safe.  You can copy the profile of the account administrator part of your new account.

  Follow the instructions here: to copy a user profile

  Note that you can not copy a profile to or from the account that you are currently connected, if you want to copy the user profile to user B, you must be connected with the C & C user the user must have administrator privileges.

  John

• When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.

  problem reinstalling windows Vista operating system.

  I'm trying to reinstall the windows Vista operating system.  When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options.  I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally.  How can I solve this problem.  Thanks in advance for your support.  Valerie SG

  Why you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.

  However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_347576&isLegacy=true

  And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:

  http://support.Dell.com/

• What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  The easiest and most reliable I've found is to make the direct drag-and-drop method.

  (1) on the old computer, open your Windows Explorer and go to your photos.

  (2) open another Windows Explorer window and access your 'Computer' folder and in your flash drive

  (3) drag the photos to the flash drive.

  (4) take the flash drive on the new computer and drag them into your images folder

• I bought ligtroom 5 06/09/2014, and then installed on my computer. This computer does not like it, I wish therefore installed lihtgroom on my new computer, but it's not market!

  I bought ligtroom 5 06/09/2014, and then installed on my computer. This computer does not like it, I wish therefore installed lihtgroom on my new computer, but it's not market!

  the error message is: "the signature of download package (3) exe, is damaged or is not valid" thanks for your help.

  Hi philippeb41403529,

  Please use the link below to download a fresh installation for LR 5:

  Install Photoshop Lightroom

  See also, How to download, install and activate Adobe applications

  Let us know if that helps.

• If I buy Photoshop CS6 (not CC) and then get a new computer, can I still use it?

  I am a user of Adobe that is not in agreement with the subscription type. I do not use the software enough to justify the long-term costs. If I bought Photoshop CS6 (not the subscription of the CC), then got a new computer, would I be able to install and use CS6 on my new computer?

  Adobe software licenses are related to you as a person, not a specific computer. You can reinstall and activate CS6 on your new computer, but there is a limit of two simultaneous activations per license (technically a work and one for home, you cannot share the second installation with someone else). It is easy to deactivate the license on the old machine, once you are done with it.

  CS6 is specific of operating system (Windows or OS X) so if you change your operating system to your new computer, you will have to ask Adobe license converted. You can do it only once.

• Adobe lightroom off Amazon and then got a new computer

  so I bought adobe lightroom off Amazon and then got a new computer, how to do it on my new computer

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• Hello, I bought Lightbox4, but it was not compatible with XP that was on my computer so I bought wind

  Hello, I bought Lightbox4, but it was not compatible with XP that was on my computer so I bought Windows 7 now it works fine, I also Photoshop Elelements 11, I was using CS3 which I like a lot, I just tried of torus - download it again and the message I have is that the installer is corrupt, what can I do? I can't afford to buy it again can you help me?

  You can download the versions inherited from here:

  Direct download links for Adobe software

  Just make sure that you are obedient to the correct installation order - older versions must be installed before new tricks, i.e. your CS3 must be installed before LR4 and PES 11. in fact, your mistake of corruption could be just that - envcountering CS3 stuff it does not understand because it is newer than himself.

  Mylenium

• a beep, then 4 beeps per second and no startup EXP 8700

  Hi all

  I have an EXP8700 running 10 64-bit windows. Do you have the W10 last updated and the computer was working fine.

  Today, I tried to start. I get a signal, a break, then about 4 beeps per second going on forever!

  I tried another keyboard, but not chance I try to hit F2 F10 or F12 and cant' get out beeps

  Suggestions?

  Kind regards

  Mike

  What is a "EXP?" 8700? Do you mean 8700 XPS?

  Try to clear the BIOS:

  1. Power off, unplug
  2. Power button press / hold for about 15 seconds
  3. Open the case and remove the motherboard battery
  4. Power button press / hold for about 30 seconds
  5. (Reinstalling all the RAM, if is not currently installed)
  6. Replace the battery and case
  7. See if it boots with only mouse, screen and keyboard connected

• file drop down box was not, asking computer drive also appears

  file drop-down list appears with the drive of a computer box.  It's on windows Vista with Service Pack 2 installed. and he did not do it before the update was installed on 22/09/2010 what is happening offline as well.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. The 'remains' of your previous versions NAV can be troublemakers here.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online make sure that the Windows Firewall is enabled always immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6 do a clean install of the current version of your Norton application (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8 for good measure, open IE (32-bit) only to http://support.microsoft.com/kb/923737 & run the Fix It.

  9. also for good measure, open Internet Explorer (32-bit) only at http://support.microsoft.com/kb/971058 [1] & run the difficulty it in DEFAULT and modes and AGGRESSIVE. [2]

  10. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] ignore the if APPLIES to the section if Win7

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft