Before bright lights Panle flashing all when I run the Satellite 1955

I got a laptop Toshiba Satellite Mode. 1955 s803. When I plug the power to it, I get the power light on the front panel. As soon as I press the power on button the computer starts upward and in a second or two it stops and all the lights to stutas are all red.

Anyone got any ideas on how to solve this problem?

I suspect that the connector of the ac adapter is losing cause a short-circuit?

Hello

I'm afraid you can't solve the problem. I imagine that the power LED is sending a code. It's a kind of hexadecimal code that helps technician to identify the problem.
Sorry buddy but there is nothing you can do everything alone. You need professional help.

Tags: Toshiba

Similar Questions

When I run the Satellite I have to enter a password for BIOS

Hello

When I start my computer I have to enter a password (BIOS password?).
I did not have this password and do not know how to solve this problem.
I am not able to enter the system BIOS to change the Passover. I can't just do nothing. Any suggestions?

Concerning
Raymond

> I am not able to enter the system BIOS to change the Passover. I can't just do nothing. Any suggestions?
Unknown BIOS password cannot be removed.
In this case, the question using ASP

Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery, if/before you reinstall:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

See you soon.

Mick Murphy - Microsoft partner

Signature problem when you run the program BluetoothDemo on Blackberry 8320

Hello

I try to connect from my computer to the Blackberry 8320 using a serial Bluetooth transceiver. The "BluetoothDemo" program is not function properly. When I run it, I first see a white screen with "Bluetooth Sample" at the top. I click on the trackball and I get a menu with the options 'Listening to connections' and 'Full Meno'. I click on listen for connections and a screen pops up that says "connect to an external device and then type something...» "I type something on the Blackberry and the letters appear, but no other options appear to verify a Bluetooth connection. I have already associated the Bluetooth with Blackberry, but the connection failed appears when I run the program BluetoothDemo. When I click the trackball again, I see the full menu with "Serial Port close',"Get DB", etc..

In my view, that there is a problem with secure API signatures. Obviously the 'BluetoothDemo' program is not run after the first steps. When I debug on Blackberry, I see the following output from the console, which leads me to believe that there is a problem with signatures:

ocusHistory: Focus lost; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.api.ui.MediaController
JVM: bklt @286061: timer
JVM: bklt @286061: idle 15
JVM: bklt @292270: setTimer 15
FocusHistory: Lost Focus; Home screen App; Component net.rim.device.api.ui.MediaController
MWC: BluetoothDemo (4738) No sig 0 x 33
From BluetoothDemo
MWC: BluetoothDemo (4738) No sig 0 x 33
BluetoothDemo (167) started
BluetoothDemo (167) foreground
FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
FocusHistory: Lost Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
FocusHistory: Lost Focus; Bluetooth demo app. NULL component
FocusHistory: Acquired Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
FocusHistory: Lost Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
BT: allocSerialPort a0d729a8
BT: sdpAddRecord
BT: allocSdpAttributeData
FocusHistory: Lost Focus; Bluetooth demo app. NULL component
BT: SppWrite-1 failed: 1
Unable to write data. Exception: java.io.IOException: BtSppWrite failed

I was puzzled at first running the program of BluetoothDemo and initially built and generated a file alx for the com_rimbluetoothserialportdemo program, which I think is used by the BluetoothDemo program. The com_rimbluetoothserialportdemo program is currently connected to Bluetooth tx/rx, as indicated by the status of remaining devices firmly on instead of flashing (when BluetoothDemo runs the status light flashes, indicating no connection). When I switch between workspaces in which I have these projects, the set of keys is not signed, and I have to sign in again, which seems to cause the keys in the other workspace to become not signed. As further evidence of the strange signature problem, sometimes when I run either on the Blackberry there is an error that says that the application is not signed.

I want to delete the workspace and the file alx com_rimbluetoothetc could be a step in the right direction. Do I have reason to assume that the 'no sig 0 x 33' is a problem with API signature secure? Could BluetoothDemo access to com_rimbluetoothserialport and be denied because there no signatures? Thanks for any help you can provide.

Not sure that your reading of the code is correct.

_dout.writeInt (JUST_OPEN);
_dout. Flush();

These two statements will write out - which seems to be the first thing the code does. Then it goes into a loop of reading, but suppose a specifically formatted data.

In my test, I removed these and replaced with something that I thought he would be working and I'm depending on the device. As noted yesterday picked up O the data of a GPS puck - these things just send data, they never expect anything in return. So my code looks like this:
```
byte [] buffer = new byte [1024];
for (;;) {
    int len = _din.read(buffer);
    String justRead = "Read: " + Integer.toString(len) + " bytes: " + new String(buffer, 0, len) + '\n';
    System.out.println(justRead);
}
```

When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

I want to open DDL replicate of the source node, so I run
SQL > @marker_setup
Marker setup script
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Table marker installation script is completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
MARKER TABLE
-------------------------------
Ok
SEQUENCE MARKER
-------------------------------
Ok
When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors
SQL > @ddl_setup.sql
Configure Oracle GoldenGate DDL replication script
Verify that the current user has privileges to install the DDL replication...
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: For a source of Oracle 10 g, the basket of the system must be disabled. For Oracle 11 g and later, it can be activated.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.
Enter the Oracle GoldenGate name schema: ogg
Working, please wait...
Line to the ddl_setup_spool.txt file
Checking the sessions that hold locks on the tables of metadata Oracle Golden Gate...
Full version.
Using OGG as Oracle GoldenGate scheme a name.
Working, please wait...
Script of DDL replication configuration has completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGG
CLEAR_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
CREATE_TRACE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
TRACE_PUT_LINE STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
INITIAL_SETUP STATUS:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLVERSIONSPECIFIC PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
STATUS OF THE DDLREPLICATION PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLREPLICATION STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
1453/9 PL/SQL: statement ignored
1455/23 PL/SQL: ORA-00942: table or view does not exist
1464/9 PL/SQL: statement ignored
1466/23 PL/SQL: ORA-00942: table or view does not exist
1478/9 PL/SQL: statement ignored
1480/23 PL/SQL: ORA-00942: table or view does not exist
1485/9 PL/SQL: statement ignored
1487/23 PL/SQL: ORA-00942: table or view does not exist
1492/9 PL/SQL: statement ignored
1494/23 PL/SQL: ORA-00942: table or view does not exist
1499/9 PL/SQL: statement ignored
Error on line/pos
-------------------- -----------------------------------------------------------------
1501/23 PL/SQL: ORA-00942: table or view does not exist
1581/4 PL/SQL: statement ignored
1582/18-PL/SQL: ORA-00942: table or view does not exist
1584/4 PL/SQL: statement ignored
1585/18-PL/SQL: ORA-00942: table or view does not exist
1600/25 PL/SQL: ORA-00942: table or view does not exist
1600/4 PL/SQL: statement ignored
1602/25 PL/SQL: ORA-00942: table or view does not exist
1602/4 PL/SQL: statement ignored
DDL IGNORE TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL IGNORED THE JOURNAL TABLE
-----------------------------------
FAILURE: The Table does not exist
STATUS OF THE DDLAUX PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDLAUX STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
0/0 PL/SQL: analysis of completed Compilation unit
1/21 PLS-00304: impossible to compile a body of 'DDLAUX' without sound
specification of the
1/21 PLS-00905: OGG object. DDLAUX is not valid
SYS. STATUS OF THE DDLCTXINFO PACKAGE:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
SYS. DDLCTXINFO STATE OF PACKAGE BODY:
Error on line/pos
-------------------- -----------------------------------------------------------------
No error no error
DDL HISTORY TABLE
-----------------------------------
FAILURE: The Table does not exist
DDL HISTORY TABLE (1)
-----------------------------------
FAILURE: The Table does not exist
DUMP DOF TABLES
-----------------------------------
FAILURE: The Table does not exist
COLUMNS OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
GROUPS OF LOG DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
SCORES OF DUMP DDL
-----------------------------------
FAILURE: The Table does not exist
DDL DUMP KEY PRIMARIES
-----------------------------------
FAILURE: The Table does not exist
SEQUENCE OF the DDL
-----------------------------------
FAILURE: The sequence does not exist
GGS_TEMP_COLS
-----------------------------------
FAILURE: The Table does not exist
GGS_TEMP_UK
-----------------------------------
FAILURE: The Table does not exist
STATE OF THE DDL TRIGGER CODE:
Error on line/pos
-------------------- -----------------------------------------------------------------
126/9 PL/SQL: statement ignored
128/23 PL/SQL: ORA-00942: table or view does not exist
133/21 PL/SQL: ORA-02289: sequence does not exist
133/5 PL/SQL: statement ignored
657/14 PLS-00905: OGG object. DDLAUX is not valid
657/5 PL/SQL: statement ignored
919/25 PL/SQL: ORA-00942: table or view does not exist
919/4 PL/SQL: statement ignored
DDL TRIGGER SYSTEM STATUS
-----------------------------------
Ok
STATUS OF RACE DDL TRIGGER
----------------------------------------------------------------------
ACTIVE
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
OF "OGG". "" GGS_SETUP ".
*
ERROR on line 2:
ORA-00942: table or view does not exist
LOCATION OF THE TRACE OF DDL FILE
------------------------------------------------------------------------------------------------------------------------
/Home/data/app/Oracle/diag/RDBMS/AppStore/appstore2/trace/ggs_ddl_trace.log
Analyze the status of the installation...
THE STATE OF REPLICATION DDL
------------------------------------------------------------------------------------------------------------------------
ERRORS in the installation of software components of DDL replication (6)
Complete script.

I had been struggling with the same problem for 2 days. You run the script as sysdba, how do you get the error then insufficient? I did my first test GG in February. I've been on 11.2.0.3 + patch January + patch for the integrated capture. It has worked well for me. I went back to my GG test week with 11.2.0.3 + patch of July last and ran into the same problem. The solution for me was the last version of GG. See my previous post for the patch numbers.

Post edited by: ursusca

Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

original title: two monitors, mouse stuck
I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

Hello

What operating system is installed on the computer?

Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.

Method 2:
(a) click Start, type change the mouse settings.
(b) go to the pointer Options tab of
(c) uncheck Display pointer trails
(d) click apply and OK.

Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.

If the methods above do not help, you can contact the Golf Simulation for additional help.

Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

Setup of Windows 8 consumer priview

Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

(1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
http://www.partition-tool.com/personal.htm

(2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
Download Windows 8 consumer Preview ISO:
http://Windows.Microsoft.com/en-us/Windows-8/ISO
After you download the ISO file - use the Windows USB/DVD Download tool to install media:
http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

(3) installation on a separate partition for dual boot:
1 make a DVD or USB installation drive - to see the two options above.
2. start from the DVD or USB install drive and click on install when prompted.
3. during the installation process, when asked - choose a custom installation.
4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
5 continue with the installation.

First of all please note:
1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
(A) remove your current hard drive and install the Preview of consumers on a spare drive.
(B) install it on a spare computer.
(C) install the Preview of consumer in a virtual machine.

For more information - Windows 8 consumer overview FAQ:
http://Windows.Microsoft.com/en-us/Windows-8/FAQ

Disabled USB when you run the WD My Passport Ultra software

I use a WD My Passport Ultra 1 TB with Windows 7 X 64, when I run the WD software all USB ports and paved touch on my laptop would deactivate but jut the keyboard. I made all possible options to solve it, but... I have removed the app, re installed the last version of the web site, restart windows. But when I connect this device as external DHH, everything goes well. I don't know what part of the security of this software disable all USB ports. I have disabled Antivirus, nothing has changed.

Please advise what would be a problem!

Thank you

Reza

Hey there RezaMoghadam :)

I'm sorry to hear about your problem. I'll try to help him with everything I can. :)
What WD software do you use? This happens with other WD or third party you run software? You have the latest driver and OS? Is the function of conduct properly on this or other computers? What is the brand and model of your laptop?
I could try the drive on another computer and see if the problem still occurs.
I also check the disk with the WD Data Lifeguard Diagnostic tool and see if it passes the tests quick and extended. Here is a link to the tool: http://products.wdc.com/support/kb.ashx?id=3XVkbA
Another thing you can do is completely remove drivers and let the OS to install via the update tool.

Post back with some progress :)

Captain_WD.

I wore a work Application TV live Android-based BlackBerry App. When I run the app on simulator.iam BB10 see the following error

When I run the app it shows first of all my wallpaper or the Welcome screen

as shown in 1st.jpg

Then after a few seconds, second page will display the page connection as 2 .jpg

After loggin with my facebook account it will show the list of channels like 3rd.jpg

as below

When I click on the above content as stated in the 3rd.jpg

IAM, seeing the error as below: correct my problems and guide me how to run my application perfectly.

You must test with the Simulator 10.2 as well, absolutely.

Yes, you need to download Android 2.3.3. Since the SDK Manager.

Then, choosing it as a target in the properties for your project you can expect to get compilation errors. It will indicate the parts in the source code that must be changed or adapted to be compatible with the level of the API 10, respectively to allow your application Android runs correctly on the 10.1 BB Android Runtime (and probably on PlayBook as well).

Here you have an article about it on the ActionBar compatibility in Android:

http://blog.imaginea.com/Android-handling-ActionBar-compatibility-issues/

URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

bbmChatDB of public database;

public static FileConnection fconnRead = null;
public static String fileReadData = "";
public static InputStream is = null;
data Byte [] = null;
DataInputStream is = null;

Here is my code...

I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

try {}

FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

If (fc.exists ()) {}

Enumeration e = fc.list ();

While (e.hasMoreElements ()) {}

System.out.println ("files are:" + (String) e.nextElement ());

play this file
StringBuffer stringBuff = new StringBuffer();
try {}
System.out.println ("opening file")-;
System.out.println ("file name is:" + (String) e.nextElement ());
fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
System.out.println ("data length")-;
If (fconnRead.exists ()) {}
is = fconnRead.openDataInputStream ();
data = IOUtilities.streamToBytes (is);
Ddd = new String string (data);
fileReadData = ddd.toString ();
System.out.println ("length of data:" + fileReadData.length ());
System.out.println ("read data :" + fileReadData);

}

} catch (IOException ee) {}
ee.printStackTrace ();
System.out.println ("Exception in the read data :")
+ ee.getMessage ());
}

}
}

} catch (IOException e) {}

e.printStackTrace ();
}

{Finally

try {}
If (is! = null) {}
is. Close();
}
System.out.println ("is closed...");
} catch (IOException e1) {}

E1. PrintStackTrace();
}

If (fconnRead! = null) {}
try {}
fconnRead.close ();
} catch (Exception e) {}
System.out.println (try ());
}

}

}

You can recode this treatment so that it uses only:

e.nextElement ())

Once a loop iteration.

Directly at the start saying something like:

String fileName = e.nextElement ());

and use fileName everywhere in your loop.

Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable. So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

{} catch (Throwable t)

t.printStackTrace ();

System.out.println ("Eception exception:" + t.toString ());

}

I think your code is thrown an exception and you don't see it.

I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

original title: Setup error.

I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

I have download it again and the problem was solved. Thanks to you all.

How to disable the prompt 'more' when you run the command 'See logging' CLI

Hello. I would like to know if there is a command that I can run to disable paging on my SF302 switch.

Thus, for example, when I run the command 'See logging' on the CLI, I care about her return all results rather than ask me hit the SPACEBAR or enter.

Is there a way to do this?

Thanks in advance for your time and your consideration.

J.L.

command is

terminal datadump

-Tom
Please evaluate the useful messages

When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

Original title: microsoft security essentails

Hi Kim,

The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

1. when exactly you receive this error message?

2. are you on a computer in the domain?

3 is the Microsoft Security Essentials-specific issue?

The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

Response with more information to help you.

R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process. Check the log file for more details

I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System
"Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.
LOG FILE:
_____________________________________________________________________________________________________________________________
Step 0-8
Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh
Step 4 of 8: UNIX making pretreatment
Running: chmod 777/db/oracle/OraInventory r
chmod-r 777/db/oracle/OraInventory succeeded
Step 4 of 8
Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".
PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015
runProcess_1
StatusString installation of Applications Technology Stack
Copy the temp area models
Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app
One-time fixes copy to temp area
Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is
/ App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory
Installation of WebLogic Server.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService
WebLogic Server successfully installed
Web Tier utility installation.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService
Level successfully installed Web utilities
Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService
EBS registered successfully
Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS
patching
/ Home/appltest/Bea/beahomelist renamed successfully.
Application of ad hoc patches
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070
at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.

It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

Concerning
KasunA

Found a workaround. The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it. I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk. Then he applies the patches without problem. A symbolic link would do the same thing.

Error when you run the setEssbaseEnv.sh script

Hi all
In the 11.1.2.x version:
MIDDLEWARE_HOME/EPMSystem11R1/products/Essbase/EssbaseServer/templates/startMaxl.sh
Scripts call another script, setEssbaseEnv.sh. When you run the script 'setEssbaseEnv.sh' it gives the error below:
$ sh setEssbaseEnv.sh
setEssbaseEnv.sh: line 4: close syntax error unexpected token ' (')
setEssbaseEnv.sh: line 4: "cd $J (EPM_ORACLE_INSTANCE) / bin /".

Why use only the location of the templates? There should be a bin folder.

Concerning

Celvin Kattookaran

Before bright lights Panle flashing all when I run the Satellite 1955

Similar Questions

When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

Maybe you are looking for