Before LOCKING connection failures?

Similar Questions

• Solved: Cannot lock new bootloader! "Please fully flash the signed version before lock the phone"

  I'm trying to follow this: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images

  But it fails in the first command "astboot flash gpt.bin partition. I get

  target reported max download size of 268435456 bytes
  
  Send "partition" (32 KB)...
  
  GOOD [  s 0.005]
  
  written 'partition '...
  
  (bootloader) Preflash validation failed
  
  FAILED (remote failure)
  
  Finish. total time: 0.142 s

  Looking around the Web, XDA and this forum, I found this: https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/GUIDE-Osprey-BOOTLOADER-LOCK/td-p/3374644

  But even once, when I write "fastboot oem begin lock" I get:

  ...
  
  (bootloader) Please fully flash version signed before phone is locked!
  
  GOOD [  s 0.022]
  
  Finish. total time: 0.022 s

  So I tried to put the ROM, but even once, I get the same errors.

  I just want to lock it again. Can someone help me?

  Thank you!

  Oh! Now I got it!

  So, just in case a person is confused, as if I was, here's how. First, find the right ROM. Then go into fastboot.

  fastboot oem lock start

  You will get the message that has the title "Please full flash version signed before locking the phone" (which should have been obvious I know, but I thought it was an error). However, after that this message that you Flash the ROM as you would. For me it was:

  fastboot flash partition gpt.bin
  
  fastboot flash logo logo.bin
  
  fastboot flash boot boot.img
  
  fastboot flash recovery recovery.img
  
  fastboot flash system system.img_sparsechunk.0
  
  fastboot flash system system.img_sparsechunk.1
  
  fastboot flash system system.img_sparsechunk.2
  
  fastboot flash system system.img_sparsechunk.3
  
  fastboot flash system system.img_sparsechunk.4
  
  fastboot flash system system.img_sparsechunk.5
  
  fastboot flash system system.img_sparsechunk.6
  
  fastboot flash system system.img_sparsechunk.7
  
  fastboot flash system system.img_sparsechunk.8
  
  fastboot flash system system.img_sparsechunk.99
  
  fastboot flash modem NO - HLOS.bin
  
  fastboot erase modemst1
  
  fastboot erase modemst2
  
  fastboot flash fsg fsg.mbn
  
  fastboot erase cache
  
  fastboot erase userdata

  To finish the block I did

  fastboot oem lock

  And that's all!

• Connection failure: unknown username or bad password

  I use Thunderbird without problem for businesses for nearly eight years. I currently run at the top of a tower with Windows 7 Pro. There is only a single account/e-mail address on Thunderbird.

  This morning when I went to check my e-mail I have my password is requested, then received the error 'sending of password did not. Mail server exchange.company.com replied: connection failure: unknown username or bad password. "I retried the password, restart Thunderbird and tried again, but still not received the same error. I sent an email from Thunderbird test which was very good. I am also able to connect to the server via web browser and I am able to send and receive emails on my mobile device.

  I erased all the saved passwords of Thunderbird and I checked account settings, but I am still unable to download any email Thunderbird.

  Apart from the deletion of the account, I don't really know what to do here. Any help would be appreciated! Thank you.

  The problem has been resolved. Apparently the POP stack had to be reset by the side of the Exchange.

  I hope this helps someone in the future...

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• ERROR: Connection failure: unknown username or bad password

  Whenever I want too run a .exe field or a program that requires administrative permissions, I type my password using the account control user, but instead of just let me through it come up with this error:

  Connection failure: unknown username or bad password.

  I searched for fixes, but have not found one that works.

  This was a very big problem I am a player computer and all the games I have, have the administrative sign (shield) and or are .exe files.

  This has happened for about 3 or 4 months now... It really gets me upset. Since there is no way to shut off User Account Control (UAC) without opening UAC itself...

  I'm running on a:

  Manufacturer: Acer
  Model: Aspire M1201
  : Processor Dual-Core AMD (tm) 8550 2.20 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit operating system

  http://www.Petri.co.il/disable_uac_in_windows_vista.htm

  Read method 1.

  See you soon.

  Mick Murphy - Microsoft partner

• Recording connection failure attempts

  Someone at - he found a way to get information about connection attempts that have failed where people enter the wrong username/password name? We use the secure gateway and I enabled database. I looked through the database but couldn't find anything by recording connection attempts that failed.

  Hello

  Unfortunately, vWorkspace do not keep track of connection failures, you need a product that collects this information from the event log and stores them for you to review later as Administrator Active or change auditor for Active Directory.

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• HP Deskjet 1510 all in one - all I have to do before I connect the power?

  I just got the HP Deskjet 1510 all in one.  Is there something I need to do before you connect the power?  In the past with certain printers, which was a problem - some things you had to do before connecting the power supply or by using the installation CD. The instructions that came with it are not very clear or complete.

  Hello trainerjim22,

  Welcome to the Forums of HP Support!

  I understand that you are looking for the installation of the new 1510 Deksjet and wonder if the thing needs to be done before connecting the power supply. You do not want to remove any packaging, adhesive tape, etc.

  You would be able to consult this guide to support to ensure you are not missing anything: printer (Hardware) setting.

  I hope this has helped.

• ISE max connection failures

  In ISE, is - anyone know if the tally for the failures of maximum connection for accounts invited (found under settings > comments > political portal page) is one per session or cumulative setting during the lifetime of the account? The County never resets and is there a way to display the current number of connections that have failed?

  Our use case, is that we have guest accounts that distributed to multiple hosts (for example for a hosted conference or special event). We had a couple of this type of accounts get suspended because of hitting max connection failures. We have increased the adjustment, but I would like to understand the parameters more has some of the guest accounts must apply to a significant period of time.

  This is per session, when logged in successfully, the counter is reset.

• Unable to connect to a Samba file server. error "the connection failure: unknown username or bad password?"

  Original title: I can't connect to a server to Samba from Windows 7 files

  I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.

  I tried several times but still the same result.

  Is there another way to do this?

  Is there a third party app that will do this job?

  Thank you.

  Hello

  (1) is the computer connected to the domain?

  (2) is the issue specific to your username and password?

  (3) tried to connect from different computer?

  If the problem is specific to your username and password please contact the it Department for assistance.

• How to turn off the message waiting after a connection failure?

  Hello

  I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.

  
  

  On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.

  
  

  I don't want no waiting to connect again.

  
  

  I use APEX 5.0.3 with Oracle 11 GR 2
  

  
  

  Best regards.
  

  The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

  That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

• Host connection failure: VMs, warehouses of data inaccessible (in gray)

  Hello everyone,

  I have 1 ESXi host 5.1 throwing alarm: host connection failure. Al a SNMP trap for the entity has been sent.

  I have 10 servers ESXi 5.1 all the amanged by 1 5.1 VCenter server.

  8 ESXi servers belong to a cluster HA and 2 are not in a cluster.

  The issue I'm facing is with 1 ESXi host that is outside the cluster.

  The virtual machines on that host are powered OFF. I am not able to turn on. I am not able to Vmotion them. However, if I remove them from the inventory and add them to the inventory on a different host running, VM works very well.

  Shared on this host data warehouses show Greyed out as well except the local data store (VMFS). I have 1 VM on the local disk of this host and I can power ON the property. But all other virtual machines are the shared data store (NFS - Netapp) and I can not turn on this particular host 1.

  Same data warehouses (NFS - Netapp) are shared with the other 9 (Clustered and nonclustered hosts) ESXi hosts and data store is fine and detected by all hosts.

  I tried to reboot the host several times but without success.

  Can someone please share their expert advise on how to fix this?

  Please see the attachment for details of esxi host does not.

  Thank you

  AG.

  Hello

  Yes, you can remove and install it again, Siu here below KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1005057

  Concerning

  Mohammed

• Virus definitions could not be updated due to internet connection failure, but it is connected.

  So I downloaded the essential elements of the Security window and started to update the virus definitions. He has not done, because I am not connected to the internet that I am.

  You must have posted here instead: http://social.answers.microsoft.com/Forums/en-US/msestart/threads

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What antivirus application was installed before you installed Microsoft Security Essentials (MSE), your subscription always news, and did you uninstall it before installing MSE?

  A Norton or McAfee application ever been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Maybe in relation to your problem:

  I can't install MSE to clean my already infected computer?
      http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Firewall and internet connection failure

  My Wi-wired connections and no longer work. My window firewall won't start. I now have a message to "svchost.exe. startuo - Application error The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read" "Any ideas how to solve this problem?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems like you get an error message "svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be read. I'll be happy to help you with this problem.

  (1) when exactly you receive this error message?

  (2) have you made changes on the computer before this problem?

  I suggest you follow the steps to disable Windows Driver Foundation - User - mode Driver Framework and check if it works.

  (a) click Start and select run.

  (b) type services.msc and press enter.

  (c) search for Windows Driver Foundation - User - mode Driver Framework serviceright click Choose Properties in the Startup type and then select disabled.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• What resolution should I set my screen before I connect to my TV...

  Ive tried mostve them and one of them I saw on TV (it's a screen samsung 69 inches 1080 p tv... and I know it works because ive connected before, but I forgot what to do to make it work), but when I connect it, it is upwards in Mode not supported... help please? I hate to play m games on this * fat dell monitor... (excuse my ASP) and I have a windows vista

  Hello

  Method 1: To connect your computer to a television, your computer must have a video port that matches one of the inputs on your TV.

  If your TV does not have a VGA or DVI input that matches an output on your computer, you'll need to use cables S-video or composite video.

  If your computer does not have one of these TV-compatible outputs, then you might be able to install a new video card that has the right connection.

  You will need an HDMI cable to connect TV with laptop.

  Follow these steps to connect your computer to your TV:

  1. turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.
  2. connect the video cable from your computer's output to your TV.
  3. turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.
  4 turn on your computer.

  You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably have to adjust the screen
  resolution in Windows.

  Method 2: If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Hope this information is useful.