Beginner ISE questions

Similar Questions

• Some feature ISE questions

  Hello guys,.

  I am relatively new to the ISE and would like to get some answers on the features and the administration, I could not find in the documentation. Would be great if you could help me :-).

  1. I would use MAB to printers and other devices of dot1x cabable not

  -Are there a way to automate the collection of MAC address? Otherwise I would manually create identitys for each unique device (like a wizzard or something, not .csv)

  -Si MAB is used, ISE has something as a feature of timestamp, where I can detect the devices 'dead '.

  2. we use private for guest access VLAN (just isolated or protected port on 2960 s)

  -Dynamic VIRTUAL local network port configuration works with ISE?

  Thank you and best regards,

  Tarek

  Hi Tarek,

  In regards to Automation collection of MAC addresses to be used for the MAB, there is not an integrated ISE for this solution. However, you could reduce the amount of work you'd have to do by doing something like sticky with port-security Mac first catch a MACs, then pull them right off the config to ISE manually. Even easier, clearing your arp cache and pull them out after it rebuilds. Do a little cleaning and there you go. It is not as automated as you prefer, but it is better than doing just one by one.

  For the PVLANs, I can't speak with confidence, but I can say that I do not believe it can dynamically assign PVLANs. I guess it's possible, but I saw nothing of if this has been done. I don't think that it can dynamically build the necessary to PVLANs associations. I would like to say that I was wrong on this one, but.

  Hope that helps,

  Ryan

• Laboratory of ISE question help ~!

  I'm new and trying to set up a lab to ISE.

  I had download the 1.2 ISE and installed in VMware, but after I finished installing.

  It is not installation type to initialize the ISE. and I try to connect the connection with its ip address page. but it does not work. but I can ping that ip address.

  Help, please.

  Here you have to type the installer instead of connection

• Beginner XML questions

  Hello

  First post on the forums in a long time and the first here altogether. I hope it's okay jump in.

  I have a little experience of FM not structured for several years ago and use Ventura (13 years) to my company's books (long directories - 3 000 + / volume). I made some scripts in Ventura have so little experience in programming.

  We are looking to switch to XML rather than text files tagged Ventura can import because of its lack of support, problems, perhaps due to Win7, and the effort required to maintain files to import. I downloaded the trial FM 11 and have been experimenting a bit with XML back and forth and also import what we already have in XML. If a bit I'm sure very simple questions. and thanks in advance:

  I was going through the tutorials from Adobe and everything I can find online. It seem not to be well reviewed books on Amazon that deal with structured FM 9-11. Some that look promising for XML are about 10 years old - I think not that our needs are sharp, so should I get something this old, or stay with most recent although we complain? Any recommendations? If I can get the hang of it with something that is not specific FM will be really difficult to adapt this knowledge to the FM band?

  I find EDD, DTD and schema to be rather confusing. Someone explain the difference in simple terms or direct me to a video, etc.? Assuming that I start with an XML file that is created in one other purpose, not meant to be FM, need more than one of them? Do you do first?

  Ventura if I want to have two separate data elements (off the coast of the database) on the same line, say a left-aligned with the other right aligned, programmers put both with a tab, and that is controlled by a tag paragraph in Ventura with a tab on the right. With XML, if I understand it correctly, you wouldn't do that in the XML file - I'm probably not ready to understand the method, I just want to know if this is possible without doing something like having paragraph of second properties point to have no line breaks. If so, where that would be appropriate, ESD, DTD, etc.?

  XML in FM can include inline graphics? What about an Excel chart?

  Thank you

  Gary

  Hi Gary,.

  a lot of questions, he

  But lets start with the first things first.

  For your general understanding: XML separates basically content layout. You can add metadata to the content by adding attributes to some semantic purposes or to include information for your page layout process (or any information that you feel should be here).

  XML is essentially made up of elements, attributes and entities. Those that are defined in a DTD or a schema. ESD does the same for the management of content structured in FM. To stuff FM back and forth into XML and vice versa, you will need both a DSP for handling in FM and the DTD or schema of XML processing. Basically the two similar at first, but ESD will be also some layout information included as well as routines to facilitate the production of structured content (so called context rules).

  The translation between XML and FM requires also some reading/writing-rules governing the specific elements of the FM and values to create "correct" XML files

  Your layout (-> master pages), styles of paragraph and character, etc. pre-set styles of paintings, graphics and so on, are stored in a template file, which is used when you import an XML file to the FM band.

  These are the basics that you are handling.

  Everything that affects page layout will be on the side of the FM of things (if you use it to publish stuff).

  Everything that affects the structure is mainly done on the DTD and the reading/writing-rules side (but has an equivalent in ESD).

  So, for your search:

  XML books who have 10 years maybe not the best choice, because they will probably have a lot of references to SGML, which doesn't help much. But some who are about 5 years old will do just fine - not much changed on the side of XML (unless you decide to use the XML schema).

  For FM11, it is preferable to use guides for FM9 (those are the most comprehensive) and use this forum.

  If you insured the most, I would say to book some consultant for training on the creation of ESD. This will help avoid a lot of frustration later and pays really fast off the coast.

  It can also provide answers to specific questions such as the ones you posted above (Yes, graphics work).

  Once your done with that, you need to do a search, if one of the XML flavors already established already meet your needs in general (I'm talking about DITA, DocBook, S1000D and others) or if you want to develop your own structure (which needs a mayor of brainstorming, but could better meet your needs).

  Soon Alex

• [Beginner] Simple question about fontStyle

  Hello world!

  A simple question about fontStyle (ParagraphSyle or paragraph)

  I have seen that fontStyle is for bold, italic and underlined.

  Is it possible to have some bold AND italic or italic AND underlined paragraph? If it is possible how can I do this (for example in javascript)?

  I have found that this type of examples:

  myParagraphStyle.appliedFont = "Arial";
  myParagraphStyle.fontStyle = "Bold";
  myParagraphStyle.pointSize = 24;
  myParagraphStyle.spaceAfter = 24;
  myParagraphStyle.spaceBefore = 24;
  myParagraphStyle.fillColor = myDocument.colors.item ("Red");
  

  Someone has an idea?

  Afternoon of Goor

  Is it possible to have some bold AND italic or italic AND underlined paragraph? If it is possible how can I do this (for example in javascript)?

  I have found that this type of examples:

  myParagraphStyle.appliedFont = "Arial";
  myParagraphStyle.fontStyle = "Bold";
  myParagraphStyle.pointSize = 24;
  myParagraphStyle.spaceAfter = 24;
  myParagraphStyle.spaceBefore = 24;
  myParagraphStyle.fillColor = myDocument.colors.item ("Red");

  Someone has an idea?

  Each font has its own list of styles - so some fonts will work with "Bold Italic" - some don't.

  Myriad PRO were "Bold Condensed Italic" and "Bold Italic". Some fonts use "Slanted" as "italic".

  Robin

  www.adobescripts.co.UK

• Beginner or questions on statistics?

  I work with an old database (version 8i) which is still in use, but be eliminated and I am experiencing performance problems when querying it. (For the record, I am not the ADMINISTRATOR, I simply query the database data). Usually, for simple queries, the performance are acceptable, except on some larger tables (> 1 million rows). I know that the default optimizer mode is based on rules, but I know that I can use the indicator to choose to force using the CBO. I checked to see when the statistics were generated last for some tables involved in slow queries, and 'last_analyzed' is empty for some of the paintings and more than two years for others (no more recent than the one at all). I guess it's bad. I want to tell someone to fix this problem, but I'd like to at least know what I'm talking about when I ask...
  
  Then...
  Statistics should be generated for each table or only some?
  Are there restrictions on whether or not the statistics can be generated?
  Are there guidelines on how often of statistics should be generated/how do you know that statistics are too old?
  Statistics can be generated when the database is used? (i.e. the application using the database is to write on it, and people are there access)
  Is there anything else important I should know to intelligently demand to be fixed?

  Just to be clear, the / * + CHOOSE * / suspicion does not force the Oracle to use the CBO. Instead, it forces the optimizer_mode for reporting to CHOOSE. Which, in turn, means that if at least one of the objects in the query has statistics, the CBO will be used. Otherwise, we would use the RBO.

  If the optimizer_mode for instance has been set to the RULE and other applications that the database never change the optimizer_mode (whether by changing the value of their session or through councils or by using one of the structures that will force the CBO to use) access, then collection of statistics is a relatively low risk. Check that no application changes never optimizer_mode for their session or for one of their applications, however, can be a little tricky. I saw a lot of applications that swore to people using only the RBO who suddenly entered the wrong herbs because some developers at some point had written a query that forced the CBO to be used or changed optimizer_mode of the session or something in that sense. So even if everyone expects that the collection of statistics would cause no problem, if you already have fire-fighting people in fashion, they missing you something may be too large to justify the collection of statistics for queries (of course, I do not know how critical your reports are compared to other processes running on the database) It's quite possible that the risk is worth).

  You can force the CBO to use whether or not statistics exist on objects by using the / * + ALL_ROWS * / index (or by changing the to your session at ALL_ROWS optimizer_mode). If an object is not statistical, Oracle dynamically gather statistics during parsing of the query. As I mentioned earlier, which is generally less accurate than to have appropriate statistics, but it is often close enough.

  Justin

• Beginner tutorial question

  Hello
  
  I'm just digging in ADF and completing the tutorial 'working with bounded task flows, regions and routers in JDeveloper 11 g' (http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/boundedtaskflow/bounded_task_flow.html). While all executed instructions view a working example, I don't understand how it works exactly.
  
  If you select an employee in the search page, and then click the next button to load the update page, the selected employee data previously automatically appears in the corresponding form elements. At first I thought that the State of the selected employee is assured hollow links on the update page, which must refer to the same iterator as on the search page, but then I realized that my searchPageDef.xml and updatePageDef.xml reference separate iterators.
  
  Can someone give me some advice or information that will help me understand the concepts that underlie the example?
  
  Tilmann

  Since the referral for the VO same rank occupies iterator. the arrow points to the current and the same line that a user accesses the search page.
  AM controls the entire transaction... and each VO bounded on AOS points to the same object. AOS is exposed as a data control and we use the iterator... So, never iterator how you use... internal AOS maps to the same instance of VO.
  If you use different AM then the transaction remained differentiated and the VO stands separately.

• Beginner with questions of the base layer

  Hi all!  Been reading / looking for a solution to my problem, but can't find it - so now I ask the group.  I'm not a trained Designer, plus a young craftsman/teacher-type elementary school who want to have fun with pictures then purchased the package of the educator of the Adobe with the new Mac Book Pro last year.  CS3, I used PrintShopDeluxe () widely, and iPhoto, Photoshop, etc...

  I am not able to understand the functioning of the layers.  I create / setting up a certain print doc size (pixels).  I opened pictures (including large size I have handled/shrunk by Preview) and bring them into the doc very well.  But!  each photo has another layer and the first picture disappears when I add the second photo. THEN the layer panel goes to the most recent photo and I don't see anything on the other photo!  I thought that the info would build in the layers panel, but no, in that I have to return to the file open the recent item to see the other picture that I put. I've exhausted all the possibilities I can muster from drop-down menus. Why not the layers panel building of information with every thing I add?  Maybe I'm not adding things the right way?

  I know that I'm over my head with this program, but the tutorials are wonderful and so is this forum.  I am determined!

  So, thank you to breathe a big sigh and scribble a fundamental aid for me.

  Marg PDX

  You say you're "Opening" files. Who would not simply open a new document

  with only the single photo placed inside?

  Try to 'place' images in an active document rather than "opening" your

  images. To place an image, click on file > Place.

  -JM

• Pointing out the correct answer after failing to question?

  Hello

  I'm experimenting Captivate 7 and worked on how to do just about everything I need it to do. I have 3 or 4 mini-quizzes scattered throughout the presentation that allow 3 attempts before moving on. What I would do, is however, before continuing, display or highlight the correct answers. Is it possible to do?

  Thank you

  Hello and welcome,

  Normally this will be done during the review: correct answer indicated (with a check mark) as well as the answers given. But the inquiry cannot be done after the quiz was made using a button on the slide to Score.

  It could be done, perhaps a bit difficult for a beginner. Question slides do break (you see the double vertical line in the timeline of the slide) and this break is used twice: playhead rest pause when the user clicks on send and see the legends of your comments, then it must support on Y or click on the slide to leave the playback head. Look at the accordion of actions in the Panel properties Quiz: success and the last attempt are by default set to "continue".

  More information: http://blog.lilybiri.com/question-question-slides-in-captivate and http://blog.lilybiri.com/question-question-slides-part-2

  If you understand this workflow, you could time a highlight (box or something else), immediately after this point of suspension. As the playhead will continue, this climax appear, but be visible only for the period after the point of putting paused. If this is not enough, you can do the longest slide in questionnaire.

  

  Here I change the duration of the Quiz slide to 5 seconds, which means that the highlight box will be visible to (1. 5-5) = 3.5 seconds before the read head reached the end of the slide and goes to the next slide

• Gateway of last resort and PAT

  Hello

  I have a beginner-ish question.  Currently, we have 2 ISPS enter into our router, sprint and comcast.  Our gateway of last resort is set to Comcast.  Our users are also access internet through PAT, with an IP of Comcast address.  If I change the gateway of last resort for the Sprint, what effect that will have on the users?  Are they going to send traffic through the Comcast line, since it is the address assigned to them, or they will send the traffic through Sprint?

  Hi Scott,.

  for the inside of the NAT, routing is always performed before NAT and Yes, you could use PBR to send traffic to the new stretch following ISP.

  Kind regards.

  Alain

  Remember messages useful rate.

• How to indent or tab lines

  A beginner in question with certainty.  (InDesign CS5)

  I enclose a screen so that you can understand my question.  I have 2 paragraphs.  I want the pipes under the first line of each paragraph of the line upward under the word the.

  I thought I had a tutorial on paragraphs which explains this, but I'm not.  :-/

  Or if explanaton, is it too... what I would like google to find answers?

  Thanks in advance

  You can make a negative withdrawal of these two methods:

  Open the tab of the Panel, place the cursor in the text, drag the two triangles to the right where the text aligns. Drag the top triangle to the left when first indent only align (it's the hanging indent). Add a tab to the place where copy after aligns underscore. Enter a tab after the underscore

  Open the paragraph Panel, place the cursor in the text field, enter numeric values for each: left indent and the first line (this will be a negative value)

  

• Transitions on scenes do not work

  Greetings!

  Please forgive a newbie from a beginner user, question I searched for the answer to this problem for a few days now, so I apologize if it has been discussed before.

  I am creating a video marriage for my wife for Christmas, but I'm running into issues.

  Fortunately, the 4 DV tapes, I captured imported in first and he saw scenes! I do not know how, because everything I read that you had said to capture with first with scene detection on in order for this to happen, but they are there and who cut a lot of work to split the four long strips.

  The problem I have is that if I simply drag the two clips in the timeline panel or the timeline, and then create a simple cross dissolve transition between the two, it just doesn't work.

  What happens instead, it's the first scene fades to black and the other appears in. The transition failed even seems not to extend on both scenes. It seems to have applied at the end of the first scene, and the other is exactly where it starts.

  I'd appreciate very much any help you could offer...

  Thank you

  Matt

  That is right for your timeline. It works in layers with the upper layers having priority. If you want to have the second clip through show you will need to change the opacity of the top tether.

  But to use a transition put the two clips on the video track and drag your transition to it. You will then see the drop to the transition area.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Display a different web page according to the day.

  Hi all
  
  A beginner total question here because I'm not sure how to start this project.
  
  I have a new page on my site from work and asked that every Friday, the displays a page of differnet: a summary of the new weeks... (I've never used cfm for the things of database so it is a new direction for me).
  
  I don't know where to start. I could get coldfusion to find the date and time, but how could I get it to display a different page depending on what day it is?
  
  No guidance to get me in the right direction would be appreciated.
  
  Thank you
  
  Paul.

  don't forget the dayofweek () /dayofweekasstring () functions, too!

  If it's a good html/cfm page summary of the week you have,
  You can simply use to redirect to your original page
  a new if today is Friday...

  That is to say, at the top of your original news page add:

  
  
  

  ---
  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• Download or unlock code? Beginner question

  Hello world

  It's a bit silly question from beginner on in-app purchases bare with me please

  Basically...

  Do you want to download content when you make a purchase or do you just unlock code? If you download content RIM hosts it similar to the file of the application bar? Or do I need to have my own downloadable content server host? (or maybe a 3rd party like scoreloop)

  So, for example, if I make a game with 50 levels and the basic version is only from 30. Can I code upwards and release all 50 in a folder bar but wrap access to 20 of these levels within some type of if statement where I check the receipts of payment?

  OR you release the game with 30 levels and then once the user makes the payment that they download the 20 extra on their phone?

  I am currently looking by making payments in application, that is why I ask. Initially I thought that you have downloaded the content (like xbox DLC) but the code example / documentation doesn't mention anything about downloading content.

  Thanks in advance

  Jason

  It's 100% up to you. If the files are large, so it may make sense to build them in the application so that the user doesn't have to wait to download.

  All downloads need to be hosted by you, the App World servers only host apps.

• ISE rebuild - Cert Question

  Had to rebuild our ISE primary and secondary (HA) devices because of the hardware failure. Currently, I have improved the capacity of the disk with disks mirrored with HSP. In the reconstruction, I was unable to use my backup.

  So my question is: if I have to generate a new certificate request (CSR) signature to get my CERT to bind correctly?

  Thank you

  Dave

  Hello

  When you rebuild the ISE server, it will bring self cert signed thereon.

  You can also join servers with self signed certs.

  Make sure you self-signed the other needs to be there in the store of trust of ISE.

  Config backup contain also system certificates.

  Concerning

  Gagan

  PS: rate if this can help!