Gateway of last resort and PAT

Similar Questions

• How can I go back to the OLD version of Firefox? I've updated to this version last week, and I don't like it.

  How can I go back to the OLD version of Firefox? I've updated to the new version of last week and don't like it at all.

  You are welcome.

  Could you please click the button "solved it" to take your post out of the loop?

  Thank you.

• How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  What to do if you already have?

  Peter

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into the settings, click the software update that is displayed simply endless turns.

  I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into settings, a notice is displayed under the general rubric that there is 1 available software update, but when I click on the link for the software update, it runs just endlessly. I am not able to connect to the WiFi (nothing happens when I click on the WiFi button). Did not have this kind of problem before. Thanks for any idea.

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold the two for up to 30 seconds until you see the apple logo.

  Then try update on your WiFi

  See you soon

  Brian

• I played "Mahjong Trails" and in position # 3. He played last night and I just tried a few moments ago and I come in. Can you tell why?

  Hello

  I played "Mahjong Trails" and in position # 3. He played last night and I just tried a few moments ago and I come in. Can you tell why?

  I've struggled since Facebook has said that someone tried to enter in my accouant and they had me off facebook about 3 days. Who would have something to do with it?

  Impatient of solve you this problem, because I REALLY don't like this game.

  Thanks for taking care of this

  hope that I broke all the rules. and I hope that I chose the right forum because I've NEVER done this before.

  original title: GAME MAHJONG TRAILS Can t PLAY WHY

  Hello Shirley,

  This isn't a problem with MSE.  You deal with Facebook on this (as hard as I know what to do).

  There is an excellent chance that what has happened to your account either interfered with your game or was not completely fixed or there is something else wrong with your account or maybe the game.  Your best bet is to start here: http://www.facebook.com/mahjongtrails#! /help/? section = applications_and_websites and see if you can get help any with the game or the other answers predefined or by searching.  Then, would be to try general help: http://www.facebook.com/help/?topic=applications_and_websites#! /help/? tab = discussion where you can post questions about your problem.  If possible, I try to uninstall and reinstall the game (even if it make you lose your points or your rankings) - or you can ask for help from their first that they are able to help.  Or open a new facebook account in the meantime and see if you can download and play the game on this account.  So not only will you be able to play, but you will know for sure, this isn't a problem with your computer, the game, your browser or malicious software.  You can pretty well and nail down to a problem with the other account or installing the game on this account.

  It is almost certainly a problem with Facebook and not your computer, malicious software or your browser.  You need to deal with them on this subject.  If you have the best technical support coordinated because of your recent problems, by all means to re-open the case, or get help that direct contact is all but impossible here trying.

  I'm sorry, we can not help you more, but it's really a matter of Facebook and you need to deal with them to resolve the issue.

  Good luck!

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Is it possible to reset the date of the last virus and update the spyware definitions in XP?

  I have xpsp3.  I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE.  Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now.  So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?

  Correct the date on your computer. Remove the antivirus/malware product and reinstall.

  -OR-

  To restore before the update, use the system restore. Make sure the date is correct. Update.

  Tom Ferguson

• Why my Windows defender updates itself automatically? I last updated and also I do not Windows update to automatically install updates.

  Why my Windows defender updates itself automatically? I last updated and also I do not Windows update to automatically install updates.

  Hey open58,

  Follow this link here to understand why Windows automatically updates itself, even if you do not assign it. I'm a bit confused about your real question so if it is not answered please just ask him one more time and I'll try again.
  Thanks for posting of Microsoft Answers!

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• I got a virus last year and tried to remove it for months, it's a virus IMPOSSIBLE!

  : Origin IMPOSSIBLE the virus!

  I got a virus last year and tried to remove it for months had to leave and walk away to keep my sanity! VAIO and OS is vista!

  I get a BSOD and only able to boot in safe mode!

  It only doesn't let me do a system restore (even command line)

  I run rkill it finds nothing...

  EACH SPY software removal

  I went through tons to fix!

  I would LIKE a RESPONSE or any kind of help! I miss my laptop!

  Hello

  Run everything first is that there is no rootkits that can survive a re-installation of Windows.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will show infections in the report after the execution.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Check with Sony support for the methods to restore the laptop back to the form of the plant which removes
  all programs and data, save the data off the computer and get ready to re - install the
  programs.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Updated Windows rebooted my computer and installed the updates last night and now my login password is different and I can not connect. Help?

  I put my computer to sleep last night and when I woke up this morning it has restarted and was sitting on the login screen.  This occurs when windows update itself - and I absolutely hate it by the way.

  When I entered my password, it says that it was incorrect.  I had the same password for a long time, so the only thing I can think is that the update of windows somehow changed my password.  I have Vista Ultimate 64 b.

  I did not create a password recovery disk - how can I get my account to change my password?

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• automatic updates last night and everything is gone. My documents, my pictures, my favorites

  automatic updates last night and everything is gone. My documents, my pictures, Favorites, even my wallpaper

  Hi Christy,

  You have correctly installed the updates?

  I suggest you follow the link below and check if it helps.

  Method 1: Try to do a system restore and check if it helps.

  System restore

  Method 2: Try to install the updates one by one and check if it helps.

  To install updates manually, follow the steps below.

  1. go to http://windows.microsoft.com/en-US/windows/downloads

  2 search for the missing updates using KB number for the update.

  3. download and install it.

  I hope this helps.

• I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurry

  I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurred and distorted. It drives me crazy: () I tried to calibrate it using the tools of systems, but all appears correctly be set. Can someone help me? It drives me crazy. This laptop is nearly 2 years old

  Hello

  You should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =================================================================

  Check with HP Support, their drivers and documentation online and ask the HP
  Forums for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ---------------

  It's my generic how updates of appropriate driver: (update video drivers.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

• I put my computer to sleep last night and when I opened this morning, all my text in symbols.

  original title: symbols instead of text

  I put my computer to sleep last night and when I opened this morning, all my text in symbols.  I can't read my screen.  I rebooted and got the same.  How can I fix it?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.