Beginner Question - Javascript processing batch

Similar Questions

• PS CS5 beginner question

  In PS CS5, I've hidden a rectangular selection on my first photo.   Then I dragged a picture 2nd on the 1st picture using the move tool and it creates a new layer that I now see photo part 2 out of rectangular selection of the photo from my 1st I chose a minute ago.  So far so good.

  However, I don't see a part of the 2nd photo through the window because the window is not big enough for all the 2nd photo be seen.  Is it possible to reduce the size of only the 2nd photo, so that the entire 2nd photo is small enough to be seen with the 1st pictures of rectangular selection?

  Thank you.

  Sevkie

  If I understand your question, the process is quite simple.

  1. make sure that the layer with the part you want to resize is the active layer

  2. click on "cmd" + "a".

  3. go to 'Edit' drop down menu and select: "transform": "scale".

  4. drag the corner of the frame until you have the size you want, and then press ENTER. To limit the proportions hold down the SHIFT key when you drag.

• Beginner question absolute to the Labview with GPIB connection device

  Hi all

  Firstly, sorry if my question is already posted, but I tried searching with nothing doesn't.

  My situation: I have a HP digital osciloscope, a HP 54602 B using the GPIB and trial version of labview 8.6. Now, I want to communicate with her from labview. The big question is: how? Before that I used only labview with NI DAQ card and serial port for communications of the instrument.

  the detailed question

  1 is it important (to programming in labview later) what GPIB interface that I use in my computer? Must be of OR? I still have no interface right now.

  2. I ran a search on the osciloscope Web site of NOR and find an instrument driver in:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E93F7659CE034080020E748...

  . How do they come?

  3. I know there are a few examples for the GPIB, but since I do not have the interface, I can't try it. Is it possible to simulate instruments GPIB?

  Thanks for all your help and assistance

  Hi opiq;

  Welcome to the world of instrument in LabVIEW Control!  I'll try and answer your questions one-at-a-time:

  1. N ° from a point of view of LabVIEW, you can use any interface supported by VISA and your instrument bus.  This includes (but is not limited to) boards of NOR-GPIB, 3rd-party GPIB, USB, LAN, LXI, VXI, PXI, etc..  Of course, if you do not have a GPIB interface, I would recommend a NEITHER - this is the safest way to get the experience 'it works '.  I tend to use an adapter USB GPIB (DISCLAIMER - I work for the OR).
  2. You have two options for installing the device driver.  "" The simplest is in LabVIEW to select Tools "Instrumentation" instrument Drivers find... and use our instrument driver search tool which will be step helps you locate, by downloading and installing the driver.  The other option is to download the zip file, unzip it in \National Instruments\LabVIEW 8.6\instr.lib and restart LabVIEW.  So if you look in your palette of instrumentation, you should see the driver listed under instrument drivers.  The pilot will include some examples of the use of the driver (are all certified instrument drivers).

     In fact, I would recommend this driver rather than that you connected.  It is a more modern design and install examples in the viewfinder of the example ("Help" find examples...).

     Here's a video of the above process (for a different instrument, but the process is the same)

  3. Unfortunately, there is not an easy way to simulate this instrument.  I would just recommend familiarizing yourself with the examples before acquiring a GPIB interface.

• Download or unlock code? Beginner question

  Hello world

  It's a bit silly question from beginner on in-app purchases bare with me please

  Basically...

  Do you want to download content when you make a purchase or do you just unlock code? If you download content RIM hosts it similar to the file of the application bar? Or do I need to have my own downloadable content server host? (or maybe a 3rd party like scoreloop)

  So, for example, if I make a game with 50 levels and the basic version is only from 30. Can I code upwards and release all 50 in a folder bar but wrap access to 20 of these levels within some type of if statement where I check the receipts of payment?

  OR you release the game with 30 levels and then once the user makes the payment that they download the 20 extra on their phone?

  I am currently looking by making payments in application, that is why I ask. Initially I thought that you have downloaded the content (like xbox DLC) but the code example / documentation doesn't mention anything about downloading content.

  Thanks in advance

  Jason

  It's 100% up to you. If the files are large, so it may make sense to build them in the application so that the user doesn't have to wait to download.

  All downloads need to be hosted by you, the App World servers only host apps.

• Question of process AppWorld playBook

  I had my last game for the PlayBook approved last week and I received the email that said I should connect to AppWorld and "Post for sale.

  I already have a new version update, I want to download however.

  Is there any way workflow recommended on how to address the issue?

  I don't think the PlayBook games are still available for sale even as the device has not launched?

  I guess my question is what do I I hold off on "post for Sale' my version approved until I have download my new version for approval or that I should"Post For Sale"and download the new?

  Each version taking so long to get approved? I don't want to delay my game to be in the store, because it seems that the launch of the store is close.

  I wish this stuff was less confusing but I guess it's just not familiar with how this whole process should work.

  You can download your latest version, because people will be eager to PB apps in a few weeks.  The new version will replace the current version after approval.

  The amount of time?  Who really knows.  I got my updates approved within a few hours to a few weeks.  Since it can take some time, I would upgrade your product so that you know (hope), it will be available and approved by the release of the PB.

• How to call javascript process?

  Hello!

  I have a button Delete which redirects to url:

  javascript:apex.confirm (htmldb_delete_message,'DELETE_CONFIRM_MSG');
  
  

  And a process that is placed after validation.

  How to call this process, I put the button to zero State and condition the type of request = Expression 1 and tried the two doDelete and confirmDelete in the expression field, but it does not work.

  How can I call the process?

  Hi EgaSega,

  Give you an example, try something like below

  (1) change your page

  Create the javascript function in the HTML header

  (2) of the button calls the javascript function

  action button: "URL redirect".

  Target URL: javascript:f_execProc();

  (3) modify your process

  In Conditions

  When you press the button: no condition button

  Condition type: request = Expression1

  Expression1: REMOVE

  Hope this helps you,

  Kind regards

  Jitendra

• Newbie question - javascript - php HTML5 and HTTPS w

  Hi all

  Newbie question...

  I'm having a problem with browsers, mac and javascript...

  simple story:

  1. If I put the test on site NO SSL folder - everything works ok

  2 but if I put the same test on HTTPS site folder - MAC SAFARI gets / data displays ok but firefox MAC and Chrome don't receive data

  Q: why not? How do I fix this so work all browsers?

  ---

  CONFIGURE LIKE THIS...

  Page1.html

  Gets the data with this line...

  What was...

  $.get ('getdata.php', function (data, status) {})

  ... etc.

  also tried this (absolute ref)...

  $.get ('https://mysite.com/getdata.php', function (data, status) {})

  ... etc.

  and displays the data on the same page page1.html

  Safari for MAC = works but firefox and chrome do not display data HTTPS site but all work 3 over HTTPS no alternate test site. (using only this local demand = $.get ('getdata.php', function (data, status) {}))

  BTW: if I manually go to getdata.php he gets php data and display the data in json package very well

  Q: How can I test / solve this problem, so all 3 browsers work on HTTPS site?

  Curious to know why MAC SAFARI OS 10.10.4 was an error?

  There are differences in the way different browsers support SSL.

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Sequencing to render the 'working area' as a process batch in the SOUL

  I use the latest version of creative cloud (20141)

  I need to restore large amounts of footage of the first both in the SOUL and I need to display the work only area. How can I change this setting on several sequences at the same time to avoid doing one by one.

  Thanks, Moja.

  I have to make the 750 videos this month and don't want to go through each sequence and configure it to display the work area. In the latest version of SOUL, make work was default zone. Let me know how can I set this up as a batch process so I don't have to spend all day clicking on through one by one.

  Thanks, Moja.

• Pool CP 7 Question javascript HTML5 version error

  I use CP7 and publish on HTML5. I have a number of gliding random quiz using a number of question pools.

  The project publishes very well, but when I try to display the project in the browser I get the following Javascript error.

  SyntaxError: ILLEGAL of unexpected token to eval (native) to b (.../publish/3-theory/3-theory-r1/assets/js/CPXHRLoader.js:36:374) to XMLHttpRequest. < anonymous > (.../publish/3-theory/3-theory-r1/assets/js/CPXHRLoader.js:37:45) CPXHRLoader.js:36

  1. Eception TypeError: Cannot read property "pqs" of undefined VM16920:971
     1. cp. PoolManager.loadPoolDataIntoModelVM16920:971
     2. cp. PoolManager.loadPoolsVM16920:970
     3. cp. CPPreInitVM16920:662
     4. cp. ContinueCPInitVM16920:1562
     5. cp. DoCPInitVM16920:1561
     6. cpInit (index): 17
     7. initializeCP (index): 25
     8. (index): 59
     9. (anonymous function) (index): 71
     10. b CPXHRLoader.js:37
     11. CPXHRLoader.js:37

         If I hide all the question slides project charge very well.

         I used a .gift format to load in questions and error, it seems that there could be some funny character or something, if I checked this and can not see anything unusual.

         Any idea?

         After a day of tinkering, recreate the whole project in a new file and other unnecessary effort I found the problem looking at the JavaScript code when running. Objects of the question pool did exist at all and that is why it failed.

         The problem... is because I named the pools of matter starting by a number rather than a letter.

         1_xxxx

         2_yyyy

         3_zzzz

         Unfortunately the warning message from Adobe on the naming conventions does not not for this.

         Re-appointed to help

         a_xxx

         b_yyy

         c_zzzz

         and everything works fine.

         

         In any case, hope this helps someone if they always fall into the same problem.

     12. Question on process system (nt kernel and system)

         Dear Microsoft,

         Whenever I have download a movie or a large file, my laptop system process (nt kernel and system) causes high utilization of the processor (about 40%), and it causes my computer become noisy because of too much work fan!

         I know that my system is clean (I have avast teacher, Malwarebyte s, protector of advanced system form systweak)

         Is this bad? is this normal?

         Hello

         It is normal that the information being downloaded is passed through the channels of the system while being copied and stored. If your fan is this noisy, you can consider to replace it as the bearings can be worn. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

     13. More beginner questions

         Hello

         Getting started with Java development and fairly new to BlackBerry, so I have a few questions that I hope are easily treated.

         (1) I am aware that there are different levels of API for Java on BlackBerry. I need to write an application that is a little more sophisticated than a web app, but not need features like GPS or motion control. I would like to reach a large part of the audience with a single application. Is BlackBerry JDE 4.0 the best choice

         (2) should what screen size I write to? Is there a small number of standard sizes, or is it everywhere in the jury? Are there still many people using monochrome displays or can only be ignored?

         (3) at some point I need to show my boss of information on what the BlackBerry user market looks like in terms of peripheral distribution and give him a pretty good guess as to what percentage of this market will reach our application. Where can I find this information?

         (4) I really need one of the features is the ability to view external documents from within my application. These documents are mainly PDF files, Microsoft Word or HTML documents. Is it possible on BlackBerry without writing my own code to decode documents? (For example on the iPhone, I can just open a document viewer and pass it a URL).

         (5) I saw some references to a 'business' server or a "synchronization server" that I do not completely understand. In the application, I want to write, all I need to do is to make a HTTP request to a server on the internet and analyze XML data that it returns. I guess that will be OK? Will I have access to a XML parser and HTTP connection object somehow? There is a limitation with regard to what I can connect to the servers?

         Thank you

         Frank

         I'll answer 1, 2, and 5 for you, although others may have answers to spare.

         1. it is a matter of how many devices you want to achieve. I think that 4.6 is to achieve a good balance between compatibility and the camera, well that others may say, 4.5 or 4.2, for legacy devices.

         2. I don't think you need worry too much about the size of the screen, unless you do things that are explicitly graphic, want to do your own drawing for a game or something. If you add a standard user interface elements, should ebb of things, but you obviously test on multiple devices if you are worried a lot about this.

         5. you can certainly analyze content XML on the internet (there are DOM and SAX parsers), but you have to be concerned about the methods of connection on a mobile device, if the connection is by proxy through a corporate server, through the Blackberry Internet Service in public or through the carrier's internet gateway. There are here some guides on how to handle this.

     14. Beginner questions!

         Hello

         I just bought a BlackBerry Pearl 8120.

         I had because I'm a Web Developer and realized that my sites are rendered poorly on smart phones like the BlackBerry and iPhone. I find it almost impossible to find how to solve this problem!

         My first question, then, is: where can I find a primer on the latest mobile operating systems and how to code for their browser?

         I have also some other pressing queries:

         • Is it possible to code a site for, say, my BB Pearl and find that it will make so well on other smartphones? (I mean, is there a generic protocol that will work)
         • The BlackBerry has a problem with jQuery? Mine is not running, but I thought that it was working with mobile devices?
         • HOW did you this excellent on the side-slide transition in Facebook for BB? I want that!
         • ... No: I can't get the viewport since my Pearl returned values. What's wrong?

         My little test page is here: http://internetfocusuk.com/test.php

         All reviews, advice and pointers will be slavishly followed...

         Thank you!

         Cherry.

         I just stumbled on page 12-13 in document following. It is a series of tables describing the features of the BlackBerry's OS 3.7 to 5.0 browser. As I said yesterday, a lot of things (including the manipulation of the DOM and AJAX) become available up to 4.6.

         http://docs.BlackBerry.com/en/developers/deliverables/11949/BlackBerry_Widget_SDK-Fundamentals_Guide...

     15. Beginner question: 2nd hand pc, windows 7 compatible. You need to install windows 7 from scratch. Help

         I have a second hand diskless pc and I am wanting to put windows 7 on it. I'm also a complete beginner, where can I get help on this?

         Also, I have a copy of windows 7, can I use the code on the side of the pc?

         I have a second hand diskless pc and I am wanting to put windows 7 on it. I'm also a complete beginner, where can I get help on this?

         Also, I have a copy of windows 7, can I use the code on the side of the pc?

         You can't use the code on the side of the computer to activate your copy of Windows 7, it is no longer valid for the edition/version listed on the machine. Unless it's the same edition as you have on the disk.

         * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

         * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

         * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

         * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

         Windows 7 system requirements
         http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

         ------------------------------------

         You can perform an installation without a Windows 7 key and see if it will work or attempt to reinstall the version of Windows that is listed on the certificate of authenticity.

         Boot from the Windows 7 DVD

         To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

         http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

         Click Install now

         Accept the license agreement

         When the option is displayed to select a type of installation, click (Custom advanced)

         Click on drive Options

         Select the disc/s click on Delete

         Click new

         Click on apply

         Click OK

         Click Format, and then click next to proceed with the installation

         Skip entering your product key Windows 7 and complete the installation.

         ----------------------

         Resources:

         Reinstall Windows XP:

         Install,reinstall, or uninstall Windows - help & How-to ...

         Reinstall Windows Vista: installation and relocation of Windows Vista

         Reinstall Windows 7:

         http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

     16. Beginner question - if else statement

         I know that noting on JavaScript.  I created a form.  A field is called 'Parking' and the user can select from a drop-down menu "Couple" or "Single".

         The next field is titled "fees".  I need this field to auto-complete.

         If Parking = Couple, then fees = $150.00

         Any other fees = $125.00

         I hope that my thinking is correct.  If the user selects the Couple in the Parking drop the cost field will be filled automatically at $150.00.  If the Couple is not enabled (i.e. Single would be) then charges will be filled with $125.00.

         What is the adobe javascript just to add in the field for the "Tax" field properties

         Thank you for your help with this.  As you can see, I'm a complete newbie to this.

         Galen

         JS is case-sensitive. Your domain name is 'parking' is not 'Parking', as it appears in the script. This would cause the script to fail.

         I recommend first test it in Acrobat and make sure that you have the option to display the console on errors and warnings (under Edit - Preferences - JavaScript), because this would make it immediately obvious that there is a problem.