Question on process system (nt kernel and system)

Similar Questions

• NT kernel and system cpu consumption

  Here's the problem I have and what I know so far.

  NT kernel and the system is taking up not less than 25% of the CPU and everything. "Using process Explorer, I discovered the responsible thread: ntoskrnl.exe! KeAcquireInStackQueuedSpinLockAtDcpLevel + 0x1e0

  I tried to suspend, by killing, and always watching permission and he said the same thing: can't access the thread.

  so far, I took to be a pilot for the "folder lock" new software. I have never installed this program well and have no way to find. So I downloaded the windows driver kit, because this way I can look at the data and I hope at least limit, then google the drivers I think maybe it is.

  However, the problem is that when I try to install, it says that the documents microsoft Explorer could not install and then it completely "to roll back' as he says, his installation. No matter how many times I try, it does. The two files SAY they should be able to be installed, but they are not.

  This is where I'm stuck. Any help would be appreciated.

  Relevant links are wdk install walkthrough, answer that led me to the problemhttp://answers.microsoft.com/en-us/windows/forum/windows_7-performance/task-mgr-shows-system-consistently-using-50-of-cpu/1188e9e2-4426-468a-a287-08cae81b2c73, site of the company

  Thanks in advance for your help

  I contacted the company as well, and one of its representatives offered to try to help, if she does not know the driver in question.

  ER

  This / these issues are probably best suited to each Technet (or even better) MSDN as they are developers.

  TechNet http://social.technet.microsoft.com/Forums/en-us/home (you should find the most relevant article)

  MSDN http://social.msdn.microsoft.com/Forums/en-US/home (even once to find the best section)

  If you want to leave a link to the thread I can try to help point your way

  If you have drawn a Xerf or WPR link please / them wherever you land.

  PS your average link is dead.

• last updated leads 2 force persistent ends: com.motorola.process.system and nfc

  I received an invitation to be in the impregnation Droid Turbo 2 test. I responded to the survey, but I never got an update. Now, last night, I have the update when its released to the public and made useless phone. After each restart, I get pop ups, a saying com.motoroal.process.system stopped and the other who stopped services Nfc. both are persistent even after clicking on ok, it's immediately. I can't use the phone at all.

  Should impregnation is obviously more test I go to Verizon store? I bought at Motorola.com, should I go for support of Motorola? given that I was invited to the trial of impregnation, can I put it on the soaking test forum?

  Where should I go?

  Adam Jones

  aka BaldyPal

  I've tried everything. the com.motorola.process.system popup is persistent no matter what. mode without failure, cache deleted, factory reset, can't do the settings in two modes to a time zone change, or even disable the NFC (nfc close force won't go away).

  I went to verizon, which in turn called support of motorola. They agreed to send in, reimage, then send it back. I will return to my X-Moto rocker for a week or two.

  For the record, the two parties called it a known problem. that was not very satisfying to hear knowing they pushed the update anyway. There was a test of soaking, I've even been invited, I filled out the questionnaire, but I never had the update.

  I would like 6.0.1 on this Droid 2 Turbo as soon as. I cross my fingers.

• process 'system' using 16% of CPU

  Hello. 'system' process uses 16% CPU and I cannot understand why. I can help with this?

  My computer specs are:

  AMD fx-6300 @ 3.5 ghz processor

  Card mother GIGABYTE GA - 970 a - D3P

  R9 SAPPHIRE graphics card x 270

  Kingston hyperX 8 GB (2x4gb) SDRAM KHX1600C9D3K2 Kingston SV300S37A 120G ssd

  Here are a few screenshots of the Task Manager:

  http://i.imgur.com/DdhKfcM.PNG

  http://i.imgur.com/WeCpBi7.PNG

  As you can see, the 'system' process is effectively using one of my six hearts. I would like that he if he has not done this.

  Original title: "system" deals with 16% of the CPU?

  Play well.

  When you are satisfied with your problem is solved, please mark the answer. It helps others see what answered your question.

  I had a question and the answer posted somebodyelse. How it mark as answer?

  If you posted the original question, you can mark the question as yourself have. Just click the mark as answer button.
  Source: http://answers.microsoft.com/en-us/page/faq#faqAskQuestion8

  You should see the response from Mark (and have found this useful Me) buttons on all messages, except your own messages, sent by others about your. They are there to allow you to tell other users, messages that you have found useful, and ultimately what solved your problem or answered your question.

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Problems with our order processing system

  I just bought Adobe Lightroom and requested immediate download, even if after paying I told me that "we currently live problems with ourorder processing system. "Your order is reviewed and processed soon."

  A bit disappointed as I wanted him to dive in full and begin learning lightroom.

  Rather than waiting for the processing order, it would be wise to download the trial version and then make a serial number that can be used to convert the path to a full version?

  There is no downside to using the trial version at the beginning and by simply entering a serial number (assuming that's what I want)?

  Indeed, your assertion is correct, download the trial version and when you get a serial number you can enter it, versions is the sam as the licensed version other than his lifeespan to 30 days.

  I remember you can whenever you launch the trial version to enter a serial number.  Since the trial lasts for 30 days, you should have a number entered expires (!).  Even if no catalog or have created still works fine when you finally get the serial number.

• host process no longer works and removes my default printer

  Host process no longer works and removes my default printer.  I need to reinstall my printer software for vista down a few hours later.

  Hello

  -First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  If this did not help.

  I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.

  Then REBOOT again and go through this troubleshooting and only after he re - install the
  printer. Be sure to install the latest drivers.

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  ===============================================================

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Old kernel and gui acceleration

  In FireXT (XT530/531) Motorola uses dyplay and the old kernel (from Froyo) is not accelerated by the GPU.

  My question is: WHY.

  Motorola think their customers are stupid?

  We need new software with the new kernel and GUI GPU accelerated and the charger unlocked boot.

  Yes motorola has no answer to that! Its terrible problems that we encounter on our phone is because of the way that Motorola has tried to disable features and put on a nucleus of froyo gingerbread.

  And on top of that, they lock their Chargers to start so that we the customers can't even do something.

  If the XT532 can have the new gingerbread kernel why can not get you a similar update for our phone equipment is essentially the same.

  You have fooled as in the purchase of a phone that has the right hardware and software poor... most of my friends (20 of them to be exact) would buy motorola until I told them my experience now they're looking elsewhere. !

  Your company is losing and not listening to the customers and try to trick customers how do you improve these sales... !

  My next phone won't be motorola that's for sure. !

• Cannot access the internet. Have a bunch of yellow exclamation and question marks on Net work adapters and other drivers__

  Cannot set up internet access. Have yellow question mark points of network adapters and other devices (other drivers)

  Hello

  Maybe this can help, http://www.ezlan.net/faq.html#ghost

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Host process has Sopped working and Windows will close the program...

  I get errors on the host process has stopped working and will end the program... when I open Windows Media Center on my laptop Acer 6930 G. Also I get error messages whenever I lose a web page, IE Internet Explorer closes and the problem lies...

  Hello

  Try it it will help u.

  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/

• Program will not open the program is called processing Modflow 5.3 and was built in the beginning of the 1990s

  original title: program does not open
  I'm trying to run an .exe on windows & (64-bit).  The program is called processing Modflow 5.3 and was built in the 1990s.  I tried to run as an administrator and with parameters different capacity.  It starts and appears in the taskbar, but does not open as a window.  Help, please.

  I have experienced the same problem with processing Modflow 5 and was able to bring to the screen thanks to your tip on the move with the arrow keys.

  Thanks for the help!

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• Questions about a relationship between InDesign and S1000D specification

  Hi I have a few questions about a relationship between InDesign and S1000D specification. First, InDesign does not meet an S1000D standard? If so, what questions are supported in InDesign as "S1000D issue 4.1'?." In addition, inflicts InDesign interconnected with CSDB through any creative or other module. I'm looking forward to get useful answers and thank you in advance.

  I agree with the screen name of Test in this regard. Technical publications represent only a small percentage of the market of InDesign. And it is likely that the authors of these publications InDesign may not have heard of the S1000D specification.

• Win 10 "threshold 2' very strong use of the processor by process"system and compressed memory.

  I did a clean install of Windows 10 threshold 2 (aka version 1511) on my MBP 15 "2015 and I encountered a problem. Well two actually:

  1. installing the Realtek driver hangs when you install the software in support of BC. This is easily fixed by killing the process RealtekSetup.exe.

  2. the process of "system memory and compressed" now use constantly one of the eight nuclei which ruins the life of the battery. I had to actually change the power management in Windows to allow the CPU to only go to the maximum frequency of 60%.

  Some research on Google, I have gathered many suffer from this problem on other brands and it is usually linked to a bad driver. I was not able to find the culprit yet unfortunately.

  Now, here's my question: did someone suffering from this issue as well and if so, where you be able to solve it?

  Thank you!

  Try / sleep or hibernation.

• System NT kernel and system

  I use Windows vista ultimate SP1 for 2 months.

  My pc is to have Core i7 processor.
  In Task Manager process is listed.
  Image name:-System (not system.exe)
  Username:-SYSTEM
  CPU usage:-various (0-80%)
  memory:-approximately 2500 K
  Description:-NT Kernel System &
  Can you please tell me if this process is a service of windos or there is some kind of malware or viruses? When I searched on live on system.exe he showed that he is protected by a kind of virus or malware.

  Hi Zakariya Emmanuel

  Thanks for posting on Microsoft Answers.

  Which doesn't seem to be a valid process of Vista.  Please check your system against viruses and malware.
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.