Berkeley DBXML get multi documents

Similar Questions

• I have an old computer use more, but I need to get some documents, but I don't remember the username to connect to windows

  I have an old computer use more, but I need to get some documents but I don't remember the username to connect to windows and there is no index. How can I connect

  Hi joedoerksen,

  Follow these methods.

  Method 1: Start the computer in safe mode. Built-in Administrator account would be displayed on the Welcome screen. Choose the account administrator and you should be able to boot to the desktop, if you have not set a password for the default Administrator account.

  Method 2: If you have set a password for the default Administrator account, then the only option is to go for a parallel installation of Windows XP and retrieve documents.

  Follow the method 4 install Windows XP to a new folder (parallel installation) of the article.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Method 3: Follow the steps in the article.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  See the article on the Microsoft Policy on lost or forgotten passwords.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• How can I get a document outside of Quebec? I followed all the advice. printer does not work

  Failed to get the document outside Quebec for printer

  Failed to get the document outside Quebec for printer

  Did you do the following:

  Open the command prompt window (start > run > cmd > OK)

  type the following commands and press ENTER after each line

  net stop spooler
  CD windows\system32\spool\Printers
  del *. *
  [type y in response to "are you" sure]
  net start spooler

  That's happened? Please report all error messages in its entirety, without paraphrasing?

• How to get the documents and pictures off dead PC with Windows XP to Windows 7?

  have a computer laptop w / W7 and a pc with XP that does not work. on the laptop, I can only find documents/photos for the user of the original laptop. We use msn as our Internet service provider. can I get my documents/pictures power off the pc dead to show on the laptop. I get my mail and I know it's on the storage of Ms do not know what can be done on the other info. I have a driver to drive external but not ready to be the pc immediately. There is an icon on the desktop page original user ID but have not been able to get an icon for my log show.

  Hello

  1. you try to transfer data from the laptop XP to Windows 7 computer?

  2. What do you mean by icon storage and user of MS?

  3. what exactly happened to the XP computer?

  Be more specific to help you better. Visit this link: http://support.microsoft.com/kb/555375

• How to get active Document?

  UIDRef docUIDRef = GetDocumentUIDRef (widget); Result: fDB = 0x05ccc310, fID = 1

  InterfacePtr < IDocument > document (docUIDRef, UseDefaultIID());

  Happen error:

  __vfptr = CXX0030: error: expression cannot be evaluated

  But I opened the file in the sdk, it's ok.

  IdFichier fSysFile;

  FileUtils::PMStringToIDFile ("D:\\test.indd", fSysFile);

  SDKLayoutHelper layoutHelper;

  UIDRef docUIDRef = (fSysFile) layoutHelper.OpenDocument;

  InterfacePtr < IDocument > document (docUIDRef, UseDefaultIID());

  How to get active Document?

  Thank you

  You can use the ILayoutUIUtils to get a reference to the current document. The code would be as below

  iDocument * iDoc = Utils()-> GetFrontDocument();

  -Manan

• In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Please provide ideas to the next question. In an attempt to sign and date a w-9, I get the following message.  "This form is editable in Adobe Acrobat DC.  Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

  Thank you

  Rick

  Assuming that you are dealing with a PDF file provided by the IRS, you will not be able to e-sign. but you can fill the fields using Adobe Reader or Acrobat. The version of form W-9 that I have does not include a date field, but you can use the feedback tool add text to add a date. You can also digitally sign or use the annotation of pencil tool to draw a signature.

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• He can not get active document after the outbreak of the SignalResponderService.

  Hello world

  I tried to edit a document of right after opening.

  I use kAfterNewDocSignalResponderService signal to intercept the signal to open a new document.

  But unfortunately, when this signal fires, the document is not actually opened.

  So I can't do the title of document UIDRef.

  Can someone tell me how to catch him.

  Thank you.

  Duy

  Hi Duy,

  the answering machine gets a signalMgr as an argument that has an IDocumentSignalData interface on his boss class. From this interface, you get the document.

  Markus

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• can I save email addresses in the GET a document signed in section

  can I save email addresses in the GET a document signed in section

  Hello lkmaier,

  From now on, it is not possible to record manually in EchoSign.They e-mail addresses are automatically stored once you send the document for signature. Later, when you start to type the email address in the field to send this page, the address automatically start.

  Kind regards

  -Usman

  EchoSign Support

• HOW DO YOU GET YOUR DOCUMENT SCANNED USING OCR?

  HOW DO YOU GET YOUR DOCUMENT SCANNED USING OCR?

  [discussion moved the Forum creation, edition & PDF export.]

• No way to distinguish between failure and normal when to get the document of the UCM?

  Hello
  
  I use the service GET_FILE below to get the document from the Complutense University of MADRID
  
  request.putLocal (IdcService.NAME, IdcService.GET_FILE);
  request.putLocal (IdcDocumentAttribute.DOCUMENT_ID, dID);
  request.putLocal (IdcDocumentAttribute.NAME, dDocName);
  
  and then the output stream:
  ServiceResponse response = client.sendRequest (context, dataBinder);
  InputStream inputStream = response.getResponseStream ();
  
  they work most of the time very well.
  However, in this case, exception that I can't file, rather than receive exception, I always get a steady stream until I got out of the stream as a string, I realized that this is a format string HDA indicating failure.
  
  I wonder if there is no way to distinguish between failure and normal exit without open the output string stream?
  Thank you.

  We expect that the user can download the document so successfully in the form of output stream.

  It's probably a bad support, as you have already seen ;-)

  Is the output as string-HDA when the expected of the UCM rather than throwing exception failure?

  It should be pretty easy parse the real answer to retrieve the status code the system riser. You should not need to open the file to find the error.

  Something like

  response.getLocal("StatusCode")
  

  should tell you if the file has been found. A-16 status code means that the file could not be found. In the case of a successful GET_FILE, it does appear that a status code is still present, so test just for the mere presence of a status code should be sufficient.

• How can I get my document to save the last used rotated view?

  How can I get my document to save the last used rotated view?

  Possible with Adobe Acrobat, Adobe Reader No.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• How do to get the documents after the computer has been infected by a virus and wiped

  Hello

  My laptop works most completely and there was a humming noise whenever I tried to start. I learned that the laptop was corrupt. I was informed by the customer service to clean the laptop. In doing so, all parameters resumed those available at the time of the purchase in 2008.

  How can I recover all my documents, pictures, etc.?  I take the laptop to a computer technician to help with this.

  Can also advise you how to make a backup of all items stored on my laptop please.

  Kind regards

  J.

  Wiping the phone clean and restore to factory condition as advised by "customer service" (that may be), you actually deleted all the files that were on the computer. Recovery, even by a specialized at great expense data recovery company will be at best fragmentary.

  I'm moving your question to the forum space Windows for system repair and recovery, where it is possible that you may receive some additional tips, but I think that you can simply cut your losses at this point. If there is a hardware problem that caused the initial symptoms, it is likely that you will face more questions and data loss unless you get the hardware repaired/replaced.

  -steve