Best configuration for CRD on the arrangement of office/computer laptop?

Similar Questions

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.

• The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  The code of unknown 43 for a port specific device on my computer laptop no matter what I plug into it, printer, USB key, etc.

  Hi Jack,

  Thanks for the reply.
   
  See Web Gateway site to update the chipset and BIOS drivers.
   
  Gateway support link.

  http://support.gateway.com/product/default.aspx?modelId=2375

   
  Let us know the result. If the problem is still not resolved, we will be happy to help you further.

• use the camera inbulit of computer laptop sony vaio cs

  use the camera inbulit of computer laptop sony vaio cs

  Hey Dr. Anil.V. George,
   
  Welcome to Microsoft Vista Forum!
   
  You need to install windows live messenger to use the webcam to not being able to video chat or use a video recorder to third parties to use the webcam.
   
  I recommend you consult the following link for more information on the use of the webcam:
  http://www.Microsoft.com/Canada/Home/communications-and-mobility/articles/webcam-basics-how-do-they-work.aspx

  If the latest driver updates are required, you can also check the manufacturer's Web site to download the latest version of the driver for the camera for the edition of Windows Vista installed on the computer, or if you have received a Driver from Sony disk, you can try to install the drivers for the camera using the disc.
   
  Hope this information is useful.
   
  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I check the status of the warranty of my computer laptop vaio?

  How can I check the status of the warranty of my computer laptop vaio?

  alexhrdata,

  Please see this post.

• best configuration for Small Business Server

  I'm looking for advice on HW and SW recommendations for a small business.  We have 15 users, 20 computers and 3 printers.  I currently have a single Windows Server 2008.  I want to run a domain controller main for all users, file sharing, print server, possibly Windows Update Center and eventually MS Exchange.  I am trying to decide the best configuration of HW with a fairly cheap budget.   I currently have 1 I7 based server with 4 GB of Ram, several IBM servers, P4 306 m (I have 4 +), and a lot of hard drives (all in a half rack).  I also need a decent backup system.

  Can anyone recommend the best configuration of HW player and hard?  Should I analyze server roles?  With respect to the SW, I'm a non-profit and use Windows Server 2008 (at a discount)

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Best configuration for Pegasus J4(up to 4 HDD/SSD's) - RAID or JBOD?

  I'm looking through a configuration of Pegasus J4 Thunderbolt disc for installation in first, until I can buy a more robust solution (probably Pegasus2). I am trying to determine what would be the ideal configuration for best performance on the casing of the drive. I apologize for my ignorance, but from the point of view of creation, that I'd better be using 4 small SSD (120-240 GB each), set up as JBOD? or should I use 7200 rpm disks, configure in RAID 0? Connection via Thunderbolt.

  Thanks in advance.

  Jordan

  See Page Tweakers - External Drives

  If you read carefully, you will notice that 2 SSD is max Thunderbolt connection, then add more SSD does not improve performance at all, will cost more.

  Four conventional disks 7200 RPM in raid0 will be released also (almost) max the Thunderbolt bus, but are much cheaper and offer much more space. JBOD is not desirable, because of lagging performance.

  4 x 1 TB HARD drive @ $70 = $280 less than 2 x 256 GB Samsung SSD Pro 840 @ $220 = $440

• Best Configuration for optimal IO RAID parameters and ESX 3.5 vmfs volumes

  Hello

  We currently have ESX 3.5 update 3 installed on a HP DL585 and connected to a HP MSA 1500.  ESX is installed on the server in a RAID 1 2 x 72 GB configuration.  I tried to determine the best possible configuration for the VMFS partition on the MSA 1500 (or more), but it seems to be getting some mixed reviews between RAID 1, RAID 5, and RAID 10.  That's why I thought I post the question and I hope that some people have recommendations.  Even if the disk size and type may be the best available and we can add to write the memory cache to the MSA then let me know the following... I'm coming looking with better i/o performance overall as well as redundancy (number of readers and size is not limits so if we had better available so how would he).  Assuming that VM will perform a high volume of reads/writes:

  1 size Max of LUN to optimize i/o performance (I have read 250 GB but perhaps it can be more)?

  2 for the LUN RAID configuration (RAID 5 or RAID 10, as well as all others who may still be better)?

  3. number of disks to span as appropriate?

  4. the amount of memory to install in the table itself or if anything be installed within the guest card and/or fiber ESX?

  Thanks in advance

  I'd say go with RAID 10

  Number of disks and the size depends on the VMs that spins the discs,

  Good reading this article that I found interesting and useful

  http://www.miracleas.com/BAARF/RAID5_versus_RAID10.txt

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Best Configuration for running adobe Premiere Pro CS3

  I have a 4 HARD disk system and the ability to run RAID.  What is the best configuration to run Adobe first pro CS3.  I want to be able to get the best performance out of my system.

  I wouldn't do 1 or 2 even if it is possible.

  3 won't be necessary if you use uncompressed images.  With any standard camera format, a single modern drive will be more quickly, even for multiple streams of data.

  Work terribly hard to get a RAID 0 array there somewhere, but man, it is really not necessary in most cases and may even be a bad idea for a good number of cases.

• Best practices for installation of the equipment of the unit

  Is it possible to use the CD of hardware for installation with the unit while I'm using the correct equipment. Or is it recommended to install from scratch and apply the updates of security on the Unity software page.

  Thank you

  Tim

  I think that you are writing about Hardware configuration CD of the CallManager. If you are, then this is a NO-NO.

  You need the disks of the Platform Configuration that is provided with the server if you have purchased the license for the windows 2000 Server.

  So, if you don't have the disks in the Configuration of the platform, you can download the driver from HP hard drive controller and install Windows manually. Install SP4, IE6 Sp1 and you can use automatic Windows Update If you follow this guide:

  Support policy for the automatic update of Windows

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_pre_installation_guide09186a008020a63e.html#wp64185

• Best practices for Architecture of the SOA suite domain

  Hello

  What is the best design of cluster for Oracle soa Suite of BAM and OSB Pentecost?

  I think so

  1 cluster for servers in the osb

  1 cluster for servers in soa

  1 bam_server

  or

  single cluster server soa and osb

  What is the best solution?

  The reference topology is separated clusters of weblogic for soa, osb, and bam... Take a look at the Enterprise Deployment Guide...

  http://docs.Oracle.com/CD/E28280_01/core.1111/e12036/TOC.htm

  Look...

  Expand the field of SOA components

  Extend a SOA to Oracle Service Bus domain

  Extension of the scope to include BAM

  See you soon,.

  Vlad

• Best practices for moving to the 1 of 2 VMDK to different data store

  I have several virtual machines who commit a good amount of data on a daily basis.  These virtual machines have two VMDK; one where the operating system and that where data is committed to.  Virtual machines are currently configured to store in the same data store.  There is a growing need to increase the size of the VMDK where data are stored, and so I would like these put special in a separate data store.  What is the best practice to take an existing virtual computer and moving just a VMDK in another data store?

  If you want to split the vmdks (HDDs) on separate data warehouses, just use Storage vMotion and the "Advanced" option

• How can I transfer the elements of my computer laptop win 8.1 in my 7 slate?

  I can't find a driver for my new hp slate 7.  The slate is recognized by my computer laptop but said no driver available.  Can I transfer items (such as documents or talking books) to my slate somehow?

  Hi hestia28, welcome to the Forums of HP. I understand that your slate is not recognized by your laptop. There are many ways to transfer files, in addition to these methods: work with files on your Tablet

  My preferred method is to use transfer WiFi Android Apps such as WiFiDroid.

  I hope this helps.

• How can I turn off the shot of the gesture of my computer laptop windows 8?

  I am trying to turn off the gesture on my new laptop computer shot and nobody seems to have an answer. I go online to find an answer but it gives me some information to copy and use, but it doesn't seem to work. Can someone PLEASE give me EXACT instructions step by step on how to disable these gestures? It's EXTREMELY annoying that, although I am a game or do anything at all that the charm bar opens or opens the last bar app! Don't know how long I can take this! Thank you

  OK all you Sony Vaio users, you are absolutely right.  There is no way to disable the gestures of the mouse settings.  But... I figured out how to do without having to modify the registry.  Go to your applications screen and click on the form "VAIO Control Center" y go "Keyboard and mouse", at the top of the list below, you'll see "Turn it / off touchpad" with a power slider.  The right of the element is a button «Détails»  Until it clicks.  Who will open another box saying "Enable multi touch features" there you will see a selection of 'Show the charm' uncheck the box which, and you won't have to worry about those accidental shots again.  YAY!