best configuration for Small Business Server

Similar Questions

• Pix 501 for Small Business SERVER 2003 configuration problems

  I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.

  I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.

  Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.

  I enclose my config file.

  Any help will be appreciated. Thank you

  Ed

  FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:

  No list will host 192.168.1.1 acl-enabled access 192.168.1.1

  no access list acl_outside not allowed tcp any any eq www

  no access list acl_inside not allowed tcp any any eq www

  no access list no incoming icmp permitted any one

  No list of permitted no inbound tcp access any host 24.50.241.113 eq https

  No list to access acl - permit gre 192.168.1.1 host 192.168.1.1

  No outside_in not allowed access list tcp any host 24.50.241.113 eq www

  not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0

  not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0

  static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0

  static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0

  access-list OUT-IN permit tcp any host 24.50.241.113 eq https

  access-list OUT-IN permit tcp any host 24.50.241.113 eq www

  allow to Access-list OUT-IN a whole icmp

  Access-group OUT-IN in interface outside

  What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address

  Let me know if it works

• Create the new virtual machine for Small Business Server 2008

  Hello

  When creating a new Machine virtual and choose the guest operating system, the "Small Business Server 2008" are not listed. Just choose "Microsoft Windows Server 2008 (64-bit)"?

  Thank you

  John

  Yes, it will work, and it is supported guest OS

  http://www.VMware.com/PDF/GuestOS_guide.PDF

  Edit: There is a bug in the user interface for the VIC, where probably 2008 will be displayed as Vista under the toolbar of guest operating system.

• vCenter Server with vSphere Essentials best practices for small business

  I hesitated to post this thread for fear of redundancy, but I wasn't able to find an answer in previous discussions.

  I read the installation documentation for vSphere Essentials vCenter Server installation.

  
  Is it a good idea to install vCenter on my ESXi host as a virtual machine?  I don't understand how the server can be installed as a virtual machine if she must always be on.  What happens when I do the updates of the hypervisor, ESXi (4.0 to 4.1)?  This would not cause the vCenter Server to disconnect?

  Because I have Essentials, I don't have a HA and cannot migrate the server vCenter Server to another host as shown in the installation documentation.

  Thank you

  It should not be a problem - if you manually perform the update using either the esxupdate or vcenter command vihostupdate does not at all in the game - if you use VUM he actually intitiates the vihostupdate order - when restarting the host to be reconnecting to vcenter once it is running.

• How to replace the < root windows > file \system32\ntoskrnl.exe on a system running Windows Server 2003 for Small Business Server when the system does not boot without it?

  I use an old server.  I've been reading that you can fix the file for XP if you have the disc but Server 2003 a 5 disk, that you would use, or would you use even one of them?

  Hi BrianStoll,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope that helps!

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• How to change the record to a local drive on network drive for all users (Small Business Server)?

  I need to implement a change on the backup to a local drive to save to the network drive/folder to 15 users in a Small Business Server, can someone help?

  Thank you

  Hi Frydom,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Dell PE 1950 and loading of Small Business SERVER 2003

  Recently bought a Dell PowerEdge 1950 off Ebay for a training machine. Also bought a few books of MCBS Server 2003 and Small Business Server 2003. I try to install SBS on 1950, but it does not recognize the RAID. I have a USB floppy drive I could load with F6 drivers but can't seem to find just the Perc 5 / I drivers. Site Web of Dell gives only a Setup driver that wants to install the drivers on my laptop when I use it. Could get only the drivers for a PERC 5 / I integrated. My Service tag # maintain the label removed by privacy policy > I tried a server assistant open gale who would have worked very well, but it doesn't have the SBS2003, only Server 2003 list that does not work either. Thanks for your help

  You need the "hard drive" (ZPE) version of the driver, and you have to run the EXE file to extract the files before using it:

  http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe

  In addition, you MUST configure the RAID in the CTRL-R utility until all discs can be seen by the operating system, even with the correct drivers.

  You realize that Server 2003 will be end of life in less than a year, right?  Why the push for 2003 training?  You would be better off learning from 2012.

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Backups fail on Small Business Server 2008

  We have a Small Business Server 2008 which has only backup, with the following error;

  Backup started on October 3, 2014 10:30:07 'failed with following error code ' 2155348010' (one of the backup files could not be created.). Please rerun backup once the problem is resolved.

  We reformatted the drive, it works fine, but not the backup server to it.

  Anyone has any ideas what might be causing the problem?

  SCS

  SBS is outside the jurisdiction of sites.  Questions for this should be asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/home