Best disk for my nice new laptop Asus ROG Configuration

Similar Questions

• The best mod for NB550D/02F news feed

  Hey fans of Mini Toshy,.

  There is no solid FULL only post on the net about how far you can push actully this material from end to end.
  In this post and other assignments YOU... I have a thread of a single window for geeks on this unit.

  The 32 bit Windows 7 OS [family, professional, ultimate] is the best support for chipset AMD grafix and various other drivers of ure choice, this is the best information that I have gathered... Please correct me if Im wrong?
  Also if changes 64bits como thrus thanks for posting in this thread :D
  What we geeks need to know is so information for the SATA controller on the card for the Toshiba NB550D/02F PLL5FA 02F02C, other newer models

  I have some fragmentary information, it could be SATA3 that will support an upgrade of a controller 6GBs SSD and some saying it is done SATA2 part of support 3GBs Committee but the S3 connection will still work saturate the speed of connection of the S2.
  This allows to get ALL the best mod for this sorting device information here and now!

  Post more... and thx 8 >)

  Yes, I noticed that some users here in the forum have had problems using the modules of RAM from Crucial, but Kingston modules seem to run ok.

  But you can extend the RAM to 2 GB only when a location is available as shown here:
  http://www.MyToshiba.co.nz/products/computers/nbseries/NB550D/pll5fa-02f02c/specifications#details

• Why can I not use a headset with my new laptop Asus?

  I recently bought an ASUS laptop, and I wanted to use a headset with it.

  However, I came across the problem that it is a single dose used for headset and microphone, but apparently not the two.

  Every time I plug something into it, a pop up comes up asking if his headphones, speakers or a headset. I clicked on helmet thinking it would take the microphone, but however he played its just and has not used the microphone.

  Just for my problem, headphones details usually come with two jacks, one for mic for the headphones. Usually laptops meet this and have two jacks, but not this one.

  It would be great if anyone can inform me if its possible to use my headset with microphone and headphones at the same time with my computer.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I lost my recovery disks for my sony vaio laptop model PVCEB24FX

  Hello

  I lost my laptop recovery disks and now I formatted my computer but it has many bugs init and it's too slow. Now, I want to install the original windows with its pilots.

  could you please tell me where can I get the medea recovery disk?

  My laptop model is (PVCEB24FX)

  Kind regards

  Simo

  Hello

  The PVCEB24FX # model is not correct. Is the VPCEB24FX # model?

  Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  Looking for recovery discs?

  You can buy parts from Sony recovery discs and accessories team:

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/contact_us.jsp

  Authorized Sony parts distributor:

  http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=927#place_order_9

  If my post answered your question, please mark it as an "accepted Solution".

• Problem of generation of a System Image in Windows 7 on several DVD + R using a new laptop ASUS UL50

  I'm trying to follow the instructions on the screen to generate backups in case of system crash.

  The recovery disk was created without a hitch.  I inserted a blank DVD + R disc according to the instructions and the process is completed without error.

  I tried to create a System Image disc.  In the Panel, I selected "backup and recovery".

  In the pop up box that results, in the left menu, I selected the option 'create the system image.

  A new popup box appeared asking me to select the media - and included the option of one or more CD or DVD.  There is the option that I selected.

  I was given a text string to write to the DVD (the computer name, date/time of the image and the number one probably represent the first of several discs).

  The process began by saying that it was creating the image and then he began to copy the disc.  At some point, a new popup box appeared with a message indicating that the media were too small and please insert a disc with a capacity greater than 1 GB (this is a DVD + R with a capacity of 4.7 GB).  Once again, he printed a string to write to the disk and used the same disc number (disc number 1).  This makes me think that the system has _nothing_ with the original disc.

  In addition, the popup box prompted me to "insert a new disc", but it wouldn't let me eject the disc currently in the drive.  The backup software would not prevent the drive from spinning.

  When I tried the entire backup, it would not be "Cancel".  I even went into the Task Manager to try to quit smoking.  The Task Manager indicates that the process "failed" but would not leave and the DVD player would not stop turning.

  I finally did a hard shutdown of the laptop.

  Afraid that suggests that the DVD player have been defective, I rebooted the machine, put a DVD image into the machine, and he opened it, saw my fine started and stopped etc., photos.

  I then repeated the procedure above with a new blank DVD to try to generate a new Image system and the machine performed _exactly_ the same way.

  Also.  A similar question was asked in this forum on November 2, but the response of a moderator of Answers MS did not actually the question.  Response from the moderator simply directed the questioner to a set of instructions on how to generate a backup of _complete_ (where you can either authorize MS select automatically which files are backed up or you can select specific subdirectories etc..)  NOTE: I tried this process as well, but it does not generate a backup on DVD.  According to the tutorials, my only options by using the backup scheduler to create a system image are: a separate disk partition or separate hard drive inside (or outside).  It won't let me create an image of 'system' to a _Bi) DVD using the backup scheduler.

  Hi TLÉ,.

  I want only after saving you to perform the above given the procedure, the registry. Lets give it a try and see if that helps. If this does not help solve the problem, attentio try another alternative, or probably a forum user with a similar question and fix post it here with the resolution.

  Keep your fingers crossed!

  Concerning
  Aziz Nadeem - Microsoft Support

• Best practices for creating a new project from an existing WebHelp

  I am currently working to WebHelp Pro (version RH is 9.0.2.271).

  I have a WebHelp project that currently supports the 2012 version of one of our projects. What I had to do was to create a separate project for 2013, using files of 2012 as a starting point. I couldn't find a way in HR to create a new project by importing an existing project of WebHelp, so I copied the files of 2012 in a new directory, open the project and renamed it.

  What drives this issue is that, as a result of this exercise, all seemed well, for once. However, I recently had to create new topics in the 2012 version. However, when I imported these subjects to the 2013 and compiled project, they disappeared - even if the htm files still appear in the appropriate folder of the file 2013 (when we look at with Windows Explorer).

  After reading a few posts on the forum, I thought I might have corrupted my database by creating the incorrectly the new project-, but if what I've done, it's the wrong way to go about this, I don't know what is the right way. I will be grateful for any suggestion.

  The easy way to do this is to create a copy using Windows Explorer.

  Open the project and click file > rename.

  Then you have your project is ready in 2013.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Laptop ASUS ROG with Nvidia Geforce GTX 970 m

  Hello!

  This laptop would agree with After Effects, Photoshop, and first again?

  It has a processor i7-4710mq

  1 TB harddrive

  8 GB RAM

  I intend to move the RAM to 32 GB and add an SDD 510-512.

  Thanx.

  It's a great unit.  The first thing I would do is put in a Samsung 850 Pro drive and clone the OS and Applications for the SSD and exchange it with the hard drive and then because it has two slits through all of the 32 GB memory...  If you want to help with these two options to update let me know, it is very simple

• Cannot CS4 update on the new laptop running Windows 7 64 bit

  I just upgraded a laptop slow 2 years running Vista 32-bit to a new laptop Asus G73JW running under Windows 7 64-bit. It's a laptop very fast with 8G of RAM, 1.5 GB dedicated graphics card, res HD full 1920 x 1080-player in solid state for the use of a disk etc. It's a beast of a laptop that starts completely in 10 seconds approximately and it was built for HD players. Needless to say I'm pretty excited to be able to work on my favorite Adobe software, which is mostly Photoshop and Premiere Pro.

  All about the laptop works fine but... I installed my CS4 Production Premium without issue, however, the Adobe update will not work. I tried about 10 times now, reboot, try various programs to try updates etc, nothing works. They are updated very important, because the software will not properly work in several programs without the updates. I can't find anything on this specific issue, someone has had this problem with Windows 7 64 bit?

  FYI, everything has worked with Vista 32 bit, including updates.

  I'm quite frustrated now and I just want to start using the software, and I would really appreciate any suggestions that anyone can have.

  I already have an e-mail in Asus to see if the latest NVidia GTX 460 M driver graphics card can be updated on my system. There are a few other drivers that I try to update as well to see if that will help.

  Thank you in advance,

  Aaron

  I built my computer, I installed Win7 Pro 64-bit as the only user and I still have an option "Run as Administrator" when I right click on an EXE file

  You do not have this option that makes me think that something on your installation is corrupt

• Change the language on the new laptop from Italian to English

  My old neighbor bought a new laptop (ASUS KF3U series; windows 7) and when it starts for the first time managed to change the language to Italian. I need to change this back into English for him.

  I went to control panel > clock, time, region > location & UK tab selected. on the format tab it doesn't seem to be an option for English uk just Canadian iglese, Australian etc. I turned off the pc and reboot but nothing has changed.

  I used my own laptop to go through menus to see what to do as, of course, on the other laptop, everything is in Italian.

  Help would be appreciated. David

  You can do it is that it has Windows 7 Ultimate - see how I can change the language of my laptop

• New notebook ASUS Windows 8 by displaying "features of Windows Setup that are 100% complete do not turn off your computer.

  Since the purchase of my new laptop ASUS Windows 8, it took nearly 10 hours to install the 42 "Windows updates", and 22 "Apps updated and running a restart where"configuration Windows 100% full features do not turn off your computer"sitting on my screen for 40 minutes." I can't believe this is the technology of 2013. I'm afraid how long it will take to install Office - can I take the computer back to the seller?

  Hi Duncan,.

   
  I imagine the inconvenience that you are experiencing.
   
  Method 1:
  Start the computer and follow these steps to restore health:

  a. press the Windows key + X.
  b. open Prompt (Admin) command.

  c. type dism.exe / online/cleanup-image /restorehealth and press ENTER.
   
  Method 2:
  I suggest to refer to the section my computer crashes or freezes when it installs the updates and run the fixit the link:
  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286#top

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   
  Method 3:
  Check out the link and follow the steps in the article:
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  Note: It is strongly recommended that you back up all your personal files.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Turn off Windows 8 gestures/charm bar laptop Asus R500V series

  Original title: FOUND RESPONSE - SEE below to turn on Windows 8 gestures/charm bar Asus notebook Series R500V

  How can I disable the gestures for Windows 8, Asus Notebook (non-touchpad), series R500V? Configuration/program Panel and features I find the Asus Smart gesture file but couldn't find a way to disable - uninstall only which makes no difference in the extreme sensitivity of my movements of the mouse and the computer.

  Breath, movement, or simple tap opens suddenly various applications. Not always the same, but the charms/clock/date open often even though I'm away from this part of the screen. (grrrrr!) Although I might be typing a message, etc., it unexpectedly closes the window in that I work and office switches or another program. In this case is often very frustrating and an extreme waste of time.

  I see others in this forum (8 Win) with same or similar questions have solved their problem by disabling the gestures. As of yet, I was unable to find how to do this on my new laptop Asus, series R500V, using Windows 8, IE 10. Any advice would be greatly appreciated.

  FOUND THE ANSWER TO:

  How can I disable gestures (charm bar) for Windows 8, Asus Notebook, series

  R500V?

  After having wasted MUCH time/gene, the response was embarrassing easy (thanks to the support of ASUS) to answer this question for me.

  If I trigger "fn + f9," he launched the Touchpad app to activate or deactivate. »» This information is located in the user's Guide Win8, page 20, which came with my computer... but apparently I forgot. :/

  The problem is finally solved. No more surprises the touchpad or boring bar of charm!

  Hope this answer helps someone else. Thanks to everyone for the input.

  P.S. MICROSOFT: since it is an annoyance this BIG for Win8 users... I recommend that each seller of computer awareness among their clients how to activate the touchpad/charms off ASAP - before you leave the storebar!

• Problem updating to a new laptop

  I just bought a new laptop Asus X550C and out of the box yesterday. It was equipped with Windows 8 and like any new laptop, there also 99 updates that must take place. I tried, I opened the box to update, but it won't do anything. This includes Windows 8 updates, app and windows 8.1 updates. I can't download new applications without making updates and I can't download Windows 8.1 without the updates of Windows 8. My all new laptop is so pretty useless. The update screen would be just load forever until I had to turn it off. (I've been waiting for hours, in order to give him more time won't help) A few times I managed to get to half way through, but a mistake is still being produced. I have tried rebooting to configure the updates that have happened, but I got the message "configuration of the Windows updates failed.

  In other forums, I read to do a system update, which is ironic given that the computer just out the box yesterday... I did it right and was able to download and install all updates of 99, but when I reset it, I got "failed to set up" message again. Who has been here for about an hour now.

  I was not able to take advantage of the new laptop that I bought because it has been in the installation, configuration, or returning from the screens because I got it. The laptop itself is amazing, but the Windows program did bring me sorrow.

  Thanks for any help!

  -Ali

  Edit *.

  Now, he seems to be in an infinite loop of reboot, Setup, omitting and then come back...

  Hi Atheriot,

  Generally, this problem is caused because of third-party or due to corruption or missing files in Windows Update components or programs due to the use of any other web browser by default.

  As a first step, I suggest you to disconnect all other external devices that the mouse connected to your computer and then try to install the updates.

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the steps in the following Microsoft Support article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates:

  http://support.Microsoft.com/kb/949358/en-us

  Note: try the steps that are applied to Windows 8 only.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This is to check if the problem is caused due to any third party/app program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Set Internet Explorer as your web browser default and check. This is to check if the problem is caused due to any different web browser on your computer.

  See the following article from Microsoft Help to set Internet Explorer as your web browser by default.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10

  Please reply with the status of the issue so that we can better help you.

• Several BSOD on a new laptop computer with windows 8 is installed

  Hi all

  I got a new laptop ASUS G750jx two weeks ago and have had accidents since the first day.

  So far, I have tried various hardware diagnostic tools:

  Memtest - it ran for 19 hours in multi-threaded mode, made 11 passes and had no error

  Intel diagnostic tool - found no errors

  SeaTools - had no errors

  Fumark, 3dmark - without problems

  Ran system with controlled driver enabled, had accidents, but all associated with nt kernel and doesn't really give much information (I had updated to windows 8.1 right here)

  A few days before the reset everything back to the factory settings and had more luck getting references to specific drivers in minidumps, such as sortport.sys, dxgkrnl.sys and nvlddmkm.sys. Obviously, tried all latest drivers on the website of the manufacturer, but problems persist.

  Unfortunately I deleted the latest dumps, so I enclose precedents

  https://onedrive.live.com/redir?RESID=F9EB48B99E88CF9F! 107 & authkey =! ACULQBFwZYAcOlQ&ithint=file%2c.zip

  Please let me know if you need more information.

  Thank you

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  BugCheck D1, {ffffffffffffff85, 2, 1, fffff880043a646c}

  We can see the 1st parameter is completely false and is in no way a valid address. We can check this:

  0: kd >! ffffffffffffff85 pte
  GO ffffffffffffff85
  PXE to the EPP of FFFFF6FB7DBEDFF8 at FFFFF6FB7DBFFFF8 at FFFFF6FB7FFFFFF8 at FFFFF6FFFFFFFFF8 PTE POE
  contains A 00000000011, 0063 contains 0000000001121063 contains 00000000011EF063 contains 0000000000000000
  GetUlongFromAddress: cannot read fffff8028955b0e4
  NFP 11 has 0 - DA - KWEV NFP 1121 - DA - KWEV NPF 11ef - DA - invalid KWEV

  That said, we know that a driver has accessed a completely invalid address with a too high IRQL. Good, what driver?

  0: kd > k
  Call child-SP RetAddr site
  fffff802'8abc82a8 fffff802 8925 c 869 nt! KeBugCheckEx
  fffff802 '8abc82b0 fffff802' 8925b0e0 nt! KiBugCheckDispatch + 0 x 69
  '8abc83f0 fffff880' fffff802 043a646c nt! KiPageFault + 0 x 260
  fffff802 '8abc8580 fffff880' 043a5f87 dxgmms1! VIDMM_GLOBAL::RemoveDMAReferences + 0x1c
  fffff802 '8abc85b0 fffff880' 043ac0fc dxgmms1! VIDMM_GLOBAL::UnreferenceDmaBuffer + 0 x 57
  fffff802 '8abc85e0 fffff880' 043abdd3 dxgmms1! VidSchiProcessDpcCompletedPacket + 0 x 304
  fffff802 '8abc8670 fffff880' 043ab629 dxgmms1! VidSchiProcessDpcDmaPacket + 0x18b
  fffff802 '8abc86b0 fffff880' 043ab513 dxgmms1! VidSchDdiNotifyDpcWorker + 0xd9
  fffff802 '8abc86e0 fffff880' 0423188a dxgmms1! VidSchDdiNotifyDpc + 0 x 87
  fffff802 '8abc8730 fffff880' 051a4a68 dxgkrnl! DxgNotifyDpcCB + 0x5a
  fffff802'8abc8760 fffffa80'12866000 nvlddmkm + 0xcba68
  fffff802' 00000000 00000000 8abc8768 of ' 0xfffffa80'12866000

  Interesting pile!

  We start somewhere in kernel mode with something going on - 0xfffffa80'12866000. Then we have a video driver nVidia bird call, a core of DirectX notifying a DPC, followed by a series of calls DirectX MMS dealing with all video Planner dealing with Direct Memory Access on a DPC.

  Shortly after that we remove references DMA, we call a pagefault.

  Regarding the statement us failed on:

  ADC byte ptr [rax + rdx-7Dh]

  With deference, we add a pointer that has been stored in the registers rax + rdx .

  -FAILURE_BUCKET_ID: IP_MISALIGNED_dxgmms1.sys

  Misaligned within DirectX MMS instruction pointer.

  ------------------------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 if the above fails, you have not even need to test if there is a graphics card defective, because it is (or defective Board in general). You must then indicate the manufacturer what I just told you, and they shouldn't give you a hard time... If all goes well.

  Kind regards

  Patrick

• How can I set up lightroom on the new laptop computer with SSD?

  I just got a new laptop from ROG from Asus with an SSD. I need help setting up lightroom. Should I keep my catalog of lightroom on drive C or move it to the D with all my Docs and Images?

  your catalog and images can be anywhere.  You cannot change the installation of your drive c. Lightroom and creative Cloud FAQ directory

• DRIVER_POWER_STATE_FAILURE ASUS ROG G551JW

  Hi guys,.

  I'd like to get your help, I recently bought a new laptop ASUS g55jw. As I was downloading the games on the net and sometimes play guildwars 2 my PC makes several times dreaded blue screen. I would return the laptop? or is it just a software problem that can be fixed? I read minidump and MS info files would help so I attached below. Thanks guys hope can someboday help me.

  MSINFO:

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 117 & authkey =! AP5mX_cqu0iAUxs & ithint = the file % 2ctxt

  VISION OF THE DRIVER:

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 118 & authkey =! ACBfPGqv9Utzztk & ithint = the file % 2ctxt

  SYSTEMLOG:

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 122 & authkey =! AAfvoSju2CcfKBI & ithint = the file % 2cevtx

  APPLOG:

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 120 & authkey =! AANakyBnkqOa3JY & ithint = the file % 2cevtx

  MINIDUMPS:

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 121 & authkey =! AMp0Is3oU1y5iT4 & ithint = the file % 2cdmp

  https://onedrive.live.com/redir?RESID=B2653EFE42834989! 123 & authkey =! AEzRESLmtgj1nNA & ithint = the file % 2cdmp

  Hello all, please help me. Thanks, I tried all the drivers updated hotfix etc nothing works I have experience yet BSOD help please.

  This phenomenon was linked to your driver nvidia video

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  6: kd >! devstack ffffe0007ada5060
  ! DevObj! DrvObj! DevExt ObjectName
  ffffe0007e0c6040 cannot load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys
  \Driver\nvlddmkm ffffe0007e0c6190 InfoMask field not found for _OBJECT_HEADER to ffffe0007e0c6010

  ffffe0007ada65e0 \Driver\ACPI ffffe000793f7c90 InfoMask field not found for _OBJECT_HEADER to ffffe0007ada65b0

  > ffffe0007ada5060 \Driver\pci ffffe0007ada51b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset

  ! DevNode ffffe0007ada4770:
   DeviceInst is "PCI\VEN_10DE & DEV_139B & SUBSYS_185D1043 & REV_A2\4 & 34780f33 & 0 & 0008"
  ServiceName is "nvlddmkm.