Best practices for placing < meta > tags of the document HEAD

Similar Questions

• best practices for placing the master image

  Im doing some performances / analysis of load tests for the view and im curious about some best practices for the implementation of the image master VM. the question is asked specifically regarding disk i/o and throughput.

  My understanding is that each linked clone still reads master image. So if that is correct, then it seems that you would like the main image to reside in a data store that is located on the same table as the rest of the warehouses of data than the House related clones (and not some lower performing table). The reason why I ask this question, it is that my performance tests is based on some future SSD products. Obviously, the amount of available space on the SSD is limited, but provides immense quantities of e/s (100 k + and higher). But I want to assure you that if, by putting the master image on a data store that is not on the SSD, I am therefore invalidate the IO performance I want high-end SSD.

  This leads to another question, if all the linked clones read from the master image, which is general practices for the number of clones related to deploy by main image before you start to have problems of IO contention against this single master image?

  Thank you!

  -

  ---

  Omar Torres, VCP

  This isn't really neccissary. Linked clones are not directly related to the image of the mother. When a desktop pool is created and used one or more data stores Parent is copied in each data store, called a replica. From there, each linked clone is attached to the replica of the parent in its local data store. It is a replica of unmanged and offers the best performance because there is a copy in every store of data including linked gradient.

  WP

• Best practices for p2v - when to stop the physical machine?

  After you perform a p2v conversion, when should I stop the physical machine? By default, the virtual machine is turned off after the conversion and characterized by a DHCP address and not the static address that was on the physical machine... Why is this? Not the virtual machine is a duplicate... maybe it's a setting I'm missing the conversion.

  Looking for a better practice for the p2v conversion process.

  Using Virtual Center 2.5 and the converter built-in.

  Thank you, Rick

  Hello and welcome to the forums.

  I tend to do the conversion and to choose to not to turn on the virtual machine later.  Once the conversion is completed, I make changes on the hardware as needed and then make sure that "Connect at Power On" is not checked in the device status of the NICs.  Now you can power up to the virtual machine and do what you need to do to prepare (uninstall the old software, change HALs, etc.) without fear of being on the network with the same name or IP address.  Once everything is good in Event Viewer, Device Manager, etc. - I shut down the physical server and then turn on the virtual machine with a "wired" network adapter to test.

  Another option would be to use the "Customize the identity of the virtual machine" option towards the end of the wizard import, if you need to be able to have the physical server and the virtual machine on the network at the same time.  This customization will give you virtual machine, a new name server and SID, and then you could just set it to a different IP address.

  Good luck!

• Best practices on how to code to the document?

  Hello

  I tried to search the web tutorials or examples, but could not get to anything. Can anyone summarize some of their best practices in order to document the LabVIEW code? I want to talk about a quite elaborate program, built with a state machine approach. It has many of the Subvi. Because it is important, that other people can understand my code, I guess that the documentation is quite large, but NEITHER has yet a tutorial for it. Maybe a suggestion ?

  Thank you for your time! This forum has been a valuable Companion already!

  Giovanni

  PS: I'm using LabVIEW 8.5 btw

  Giovanni,

  Always:

  Fill in the "Documentation" in the properties of 'VI '.

  Add description to the controls of its properties

  Long lines label

  Label algorithm, giving descriptions

  Any code that can cause later confusion of the label.

  Use the name bundle when clusters

  Add a description tag in loops and cases. Describing the intention of the loop/case

  Follow the good style guide as will make reading easy and intuitive vi.

  I'm sure there are many others I can't think...

  I suggest you to buy "LabVIEW style book", if you follow what this book teaches you will produce good code that is easy to maintain.

  Kind regards

  Lucither

• Best practices for the implementation of META tags for content items?

  Hello
  The portal site, I am responsible for the management of our content (www.sers.state.pa.us) runs on the following WebCenter products:
  
  WebCenter Interaction 10.3.0.1
  WebCenter Publisher 6.5
  WebCenter Studio 2.2 MP1
  10gR 3 content services
  
  The I work for the Agency is one of many for the commonwealth of PA, who use this product suite, and I meet some confusion on how to implement META tags for content of our site, so we can have effective search results. According to the [explanation of META tag standards W3C website | http://www.w3schools.com/tags/tag_meta.asp], description tags, keywords, etc., should be between the cephalic region of the HTML document. However, with the configuration of the suite WebCenter is implemented, how the head section of the HTML is closed at the end of the model code to a common header portlet. I was advised to add fields to our entry presentation models and data for the content to add these meta fields, however, since they are then placed in the body section of the HTML accordingly, these tags fail to have a positive impact on search results. Instead, a lot of our content points, when searched, the description in the search results displays only the text that appears in the header and the left navigation of our model, which arrived earlier in the body section of the HTML.
  
  Please advise possible or methods that would be best to implement the use of META tags so that we can our pages containing content to come to the top in the search results with relevant data.
  
  Thanks in advance,
  Brian

  Basically, you want to add tags portals in the presentation model to move the meta tags of the element of the header of the actual document content. Check out http://download.oracle.com/docs/cd/E13158_01/alui/wci/docs103/devguide/apidocs/tagdocs/common/includeinhead.html

  email me if you have problems with thezmobiegroup.com andrewm

• Best practices for tags

  Hello
  
  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached... What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.
  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.
  OR
  You have a better option?
  
  Kind regards
  Fateh

  Fateh says:
  Hello

  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached...

  These seem to be two different use cases. In the bundled applications tags allow end users to join free-form metadata to the data for their own needs (they are sometimes called "folk taxonomies"). Users can use tags for different purposes or different tags for the same purpose. For example, I could add 'Wednesday', 'Thursday' or 'Friday' tags customers because these are the days that they receive their deliveries. For the same purpose, you could mark the same customers '1', '8' and '15' by the numbers of road trucks making deliveries. You can use 'Monday' to indicate that the client is closed on Mondays...

  In your application you assign to the known properties of predefined attributes. It is a model of standard attribute 1:M. their view using the metaphor of the label is not equivalent to the user of free-form tags.

  What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.

  If you do this, how can you:

• Search for furnished duplex properties effectively?
  
• Change in the world "mounted" to "integrated"?
  
• Ratio of the number of properties, broken down by full floor, double-sided, equipped...

  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.

  As Why use Look up Table, shows the correct way to proceed. It allows the data to be indexed for efficient extraction, and issues such as those above should be dealt with simply by using joins and grouping.

  You might want to examine the possibility of eliminating the PK ID and use an index table organized for this.

  OR
  You have a better option?

  I'd also look carefully your data model. Make sure that you're not flirting with the anti-pattern VAE. Some/all of these values are not simply the attributes on the property?

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• What are the best practices for a new employee to learn inside the instance of their business of Eloqua as efficiently as possible?

  We have companies everything changed at some point in our lives. And we all go through the process in the first weeks, where you feel new and are just trying to figure out how not to get lost on your way in the mornings.

  On top of that, trying to familiarize yourself with your new company Eloqua instance can be a daunting task, especially if it's a large organization.

  What are the best practices for new employees to learn as efficiently and effectively as possible?

  I am in this situation right now. Moved to a much larger organization. It is a huge task trying to understand all the ins and outs not only society, but also of the eloqua instance, especially when she is complex with many points of integration. I find that most of the learning happens when I really go do the work. I spent a ton of time going through the programs, documentation, integrations, etc., but after awhile, it's all just words on a page and not absorbed.

  The biggest thing that I recommend is to learn how and why things are made the way they are currently, ask lots of questions, don't assume not that things work the same as they did with your previous employer.

  Download some base in place level benchmarks to demonstrate additional improvement.

  Make a list of tasks in the long term. As a new pair of eyes, make a list of things you'd like to improve.

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• Best practices for adding form fillable form designer EULA & forcing acceptance by the user

  What are created the best practices for adding a license agreement end user to a form with LiveCycle Designer. and to force the user to signify the acceptance of the EULA before access inside the form?

  Time, I have the kludged with a series of four message boxes (which is necessary because my LICENSE agreement, like most) is too long to fit in a single messageBox).  3 first message boxes have OK/Cancel buttons.  If the user clicks OK, she gets the following message EULA box; If she clicks cancel the form closes.  The last post (fourth) area a Yes/No buttons with the corresponding behavior.  It seems that the work (I think?), but it's ugly.  Is there an "easy way" to do it with a single drop-down dialog box "I agree" and "I refuse" custom buttons?

  I've seen references to Tools like this but they are marked as obsolete or abandoned due to security or other unspecified concerns.

  Best, Blake

  Another way might be, keep the form pages hidden at the beginning and only display a single page that has text box that contains the EULA with accept and refuse to scroll buttons. IF someone refuses, you can keep the rest of the hidden form or display message boxes to force acceptance of the EULA.

  If anyone agrees, you can simply hide the EULA page, and display form pages.

  I hope that used here too scripting required to reach it either.

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.