Best practices for the configuration of virtual switches with ESXi

Similar Questions

• Best practices for the configuration of virtual drive on NGC

  Hello

  I have two C210 M2 Server with 6G of LSI MegaRAID 9261-8i card with 10 each 135 GB HDDs. When I tried the automatic selection of the RAID configuration, the system has created a virtual disk with RAID 6. My concern is that the best practice is to configure the virtual drive? Is - RAID 1 and RAID5 or all in a single drive with RAID6? Any help will be appreciated.

  Thank you.

  Since you've decided to have the CPU on the server apps, voice applications have specified their recommendations here.

  http://docwiki.Cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29

  I think that your server C210 specifications might be corresponding TRC #1, where you need to have

  RAID 1 - first two drives for VMware

  RAID 5 - 8 hard drives within the data store for virtual machines (CUCM and CUC)

  HTH

  Padma

• Best practices for the firmware update 40 + switches

  Hello.

  I need for firmware (and boot code) updated over 40 switches PowerConnect (mainly 5324).

  What is the best practice on that?

  I tried to download and install Dell OpenManage Network Manager, but it seems like an application of 'disorder' for someone who doesn't know. I threw a look at the demo of Dell for the application, but the quality is very bad and it is a version different than the one I downloaded (V3.0.1.15) you cannot use the guides directly.

  Are there other options that manual session opening, then TFTP the new firmware and boot code? Or can someone a link to a valid demo or documentation that can help me with the work?

  Thanks in advance.

  
  

• Best practices for the configuration of VMotion

  Hi guys,.

  I need to try VMware Vmotion. What are the steps to configure Setup for VMotion. Could someone help me with this?

  I had tried to do VMotion, but have not seen the result.

  I currently have two boxes of ESX (ESX 3.5 U3) with VI U4. Primary ESX with Guest OS WIN2K3 and WINXP.

  I am also wanting to know the best practices that can be followed for configuration of VMotion.

  Concerning

  MRM

  http://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_3_server_config.PDF

  The link above is a complete in pdf format on the configuration of ESX, including the VMkernel you need for VMotion.

  Duncan

  VMware communities user moderator

  -

• Best practices for the configuration of HTML5 and native connector at the same time.

  Is it possible to configure the HTML5 and native connector for my users? What would be the best configuration?

  The best way I found to do this is to create 2 web interface sites. one configured for native connector and one for HTML5. I put a URL in the message with a message center as "it is the site of native connector. Click on to HTML 5 ". A similar message with a URL to the site of native connector is on the site of HTML 5.

  Scott.

• Best practices for the management of user access in ESXi host without 'root '.

  What is the best way to make the management of the user access to the ESXi host after you disable the default root account. Is it better to create induvidual accounts

  Via vCenter or intergrate Active directory or any other specific way.  Please help me to clarify this point. Thanks in advance for your answers.

  With the release of ESXi 5.1 it is possible to create an account on the ESXi host and assign them Full Admin privileged but there are a lot of admins of loggin in each ESXi host and user account creation.

  I would like suggestions to add the ESXi to AD and add the authorization based on domain accounts.

• Best practices for network configuration of vSphere with two subnets?

  Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.

  Install the most common iSCSI would be traffic between hosts and

  the storage is not being routed, because a router it could reduce performance.

  If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX

  MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)

  vMotion a deployment scenario might be something like:

  NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)

  standby

  NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI

  NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI

  NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion

  VMK (192.168.4.10) active

  You would place you on VLAN 10 storage with an IP address of something like target

  192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value

  gateway configured in ESXi would be the router the VLAN 20 with an ip address of

  something like 192.168.2.1. I hope that scenario help set some options.

  Tuesday, June 24, 2014 19:16, vctl [email protected]>

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone

• best practices for the storage of the vm and vhd

  no doubt this question has been answered not once... Sorry

  I would like to know the best practice for the storage of the vm and its virtual hard disk to a SAN.

  Any show advantage does make sense to keep them on separate LUNS?

  Thank you.

  It will really depend on the application of the virtual machine - but for most of the applications no problem by storing everything on the same data store

• Best practices for the compression of the image in dps

  Hello! I read up on best practices for the compression of the image in dps and I read the asset from the source of panoramas, sequences of images, Pan and zoom images and audio skins is resampled not downloading. You will need to resize them and compress them before deleting the in your article, because the dps do not do it for you. Hey can do!

  So Im also read as he active source of slideshows, scrolling images, and buttons ARE resampled as PNG images. Does this mean that DPS will compress for you when you build the article? Does this say I shouldn't worth going bother to resize these images at all? I can just pop in 300 DPI files 15 MB used in the print magazine and dps will compress their construction article - and this will have no effect on the size of the file?

  And this is also the case with static background images?

  
  

  Thanks for your help!

  All images are automatically resampled to based on the size of the folio you do. You can put in any image resolution you want, it's not serious.

  Neil

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• Best practices for the use of reserved words

  Hello
  What is the best practice for the use of the reserved words as column names.
  For example if I insisted on the use of the word to a column name comment as follows:
  
  CREATE TABLE...
  VARCHAR2 (4000) "COMMENT."
  ...
  
  What is the impact on the track I could expect and what problems should I be informed when doing something like that?
  
  Thank you
  Ben

  The best practice is NOT to use reserved words anywhere.
  Developers are human beings human. Humans have their moments to forget things.
  They will not forget to use the "", or you can force it to use the "' everywhere.
  The two methods are Oracle certified ways to end up in hell.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• AppAssure best practices for the storage of machine image

  I work in a regulated environment where our machines are validated before being put into service.  Once they are put in service, changes to the machines are controlled and executed by a process of change request.  We use AppAssure to back up critical computers and with the ' always on ' incremental backup, works very well for the restoration of level file/folder in the case where something is removed, moved, etc..

  Management process asks me to perform once a machine is validated, to take a picture of it and store the image further so that if there is a hardware failure, the validated image can be restored and the machine is essentially to it of original validated state.  In addition to having the image of the machine as soon as it is posted, I need to also back up the machine on a regular basis in order to restore files, folders, databases, etc. on this machine.

  So my question is how to achieve this with AppAssure?  My first thoughts are to perform the backup of the machine Base, then archive it, and then let the AppAssure to perform the scheduled backup.  If I need to restore the computer to the Base image, then I back the Archive and then do the restore.  Is this a feasible solution and practice?  If this isn't the case, please tell us the best way I could accomplish what I want to do.

  Thank you

  Hi ENCODuane,

  You can carry out the plan of action of the WES in the following way

  1. to protect the agent with the name "[Hostname\IP_Base]".

  2. take the base image.

  3 remove the protection agent, but let the recovery points

  4. After these steps, you will have recovery basis point for the agent in the section 'recovery only Points.

  5. go to the agent computer, open the registry and change the ID of the Agent (a sign of evolution will be enough).  HKEY_LOCAL_MACHINE\SOFTWARE\AppRecovery\Agent\AgentId\Id

  for example, of

  94887f95-f7ee-42eb-AC06-777d9dd8073f

  TO

  84887f95-f7ee-42eb-AC06-777d9dd8073f

  6. restart the agent service

  7. from this point core Dell-AppAssure will recognize machine as a different agent.

  8 protect the machine with the name "[Hostname\IP]".

  If after these steps, you'll Base image for the 'Recovery only Points' machine (with the name "[Hostname\IP_Base]" which will not be changed by the update rollup and transfers) and protected the machine with the name "[Hostname\IP]" where the transfers will be made based on configured policy.

• Measurement on the side time server? Best practices for the turn-based game

  Hello

  What would be the best practice for measuring time in a turn based game?

  I was looking at the timeout of the room, but to use that it would mean that, for each round, I put users in a new room?

  Is there a way where I can measure time serverside and keep users in the same room?

  If so, I could use php, otherwise, we would need java that allows to measure a time race.

  See you soon,.

  G

  Hello

  You can definitely use PHP or Java - we provide integration of server

  libraries for either. I don't know exactly what is the use case, so I can't

  comment on what makes the most sense, but if it is not information which must be

  totally secure, grading on the client can be a viable approach also.

  Nigel