Best practices using vWorkspace User Management or group policy?

Similar Questions

• my account administarotor was limited to use only the browser via Group Policy and can not access other programs or files

  I tried to restrict the limited account by modifying the group policy to allow the use of firefox but he apllied to the administrator account now I cannot use firefox and cannot change group policy

  Installation of repair of the win DVD 7

• What is the best practice for the double management interfaces?

  Hello community!

  I'm upgrading to a few host ESX to ESXi 4.1U1 4.0 in the coming weeks. My question is about how to configure the management networks. Obviously in ESX 4.0 Classic I have a Service Console port (on vSwitch0) group and a group of ports VMkernel (also on vSwitch0) which provides my host with SC and vmotion capabilities, as we all know. Note: my vSwitch0 has two vmnic attached to it, is pending and is active. That's just how we have our double installation of switches, so it must be active / standby.

  I got to thinking (book the great from HA and DRS deepdive Duncap Epping and Frank Denneman), that I should consider carefully when my network mangement I improve these hosts to ESXi 4.1 - which of course done away with the Service Console and use the vmkernel instead.

  The question is, in which best practices and account with my setup: I have two vmkernel ports? If so, how should I configure each for traffic management and vmotion vmkernel?

  I think it will be a good discussion to have.

  Thank you all,

  Matt

  The NIC vSwitch0 value active/active, the vswif (and future vmkernel management) team of NIC Active vmnic6 and vmnic1 ensures and leaves the vMotion vmkernel NIC team as is.

  This will allow you to use two physical network interface cards at the same time while having a failover plan and keep your physically separate management and vMotion traffic.

  In the end:

  vSwitch: vmnic1 vmnic6 active, active.

  VMK (Mgt): active eve of vmnic1 vmnic6.

  VMK (vMotion): active standby, vmnic6 vmnic1.

• Best practices using clusters to create the queue/notifier/bundles?

  I'm in a block diagram, a queue, the notifier and several instances of cluster of bundle

  that all use the same data structure.   There is a typedef of cluster for the data structure.

  Of course, each of these objects (define the queue, set notifier, bundle)

  you want to know how do you define the cluster.

  What is considered best practices?

  (1) create a dummy instance of the cluster across data structure

  definition is necessary (and hide all on the public Service)

  (2) create only one instance and son at all places, it is necessary

  But there is no stream on this thread: it's only the cluster * definition *.

  which is used, so this seems to clutter the comic.

  (3) create only one instance of the cluster control and use local variables

  everywhere else the definition of cluster is required.  It's _value_ is never

  assigned or given read-so no problem with race conditions.

  (4) another way?

  If you were to clean up someone else's code, how do you expect

  See this Treaty?

  It occurred to me during this writing that here where I

  "unbundle...... code bundle" I could wire the original beam to the

  the two "unbundle" and "bundle" - but that would be too complicated

  and the size of the comics with useless thread?

  Thank you and best regards,

  -- J.

  Hi Jeff,

  I think that this question is about "sharing" the typedef and not how share data (?)  If the cluster control is registered as a typedef (or a strict typedef) but NOT SIMPLY as a CONTROL, then when a Diagram-constant of the typedef is created, it will be updated when you update the .ctl typedef!  (and there is no FP control to hide )  Of course if the typdef is already available "close" if necessary, you will be able to use instead - save a spacer of diagram.

  See you soon.

• Tab 'Users' lack of Group Policy Object Editor snap-in in MMC for - how to market?

  "I posted a similar question in the forum TechNet hereand I have proposed a solution - use support KB313222 -" ","How to restore the default security settings? " ;
  But it did not help me - stil I don't see 'Users' tab when you configure the snap "Group Policy Object Editor. How could I get this tab "lit"?

  Thank you.

  Also when I posted something similar but better described-> "how to apply Group/Local strategies to limited accounts (non-admins) only?"

• Management of Group Policy Windows Server 2008R2

  Recently, the User Configuration Group Policy settings for my domain failed. I got the following error when you run the resultant set of policy on several different positions with a test user: Group Policy Infrastructure failed due to the error below. Not been found. Note: Due to the GP Core failure, no other component processes Group Policy policy. Consequently, status information for the other components are not available.

  We have a single domain with eight domain controllers, 30 servers members and approximately 220 positions clients working in three different time zones

  What should I watch?

  Your question is out of reach of these forums as server issues are best addressed on Technet:

  https://social.technet.Microsoft.com/forums/

  So please post your request there.

• Backup of VM best practices using vCenter Server

  Hi all

  I currently plan to backup my virtual machine in VMWare ESXi 4, I have

  installed the trial vCenter Server 4.0 administration server.

  My 2 x ESXi 4 server connected to a San and sharing a single LUN so

  in this case, I would like to create another LUN in the SAN to

  Hold the Backed up SAN. (see attachment)

  and I'm still not sure about which license should I get for this question? between essential or Foundation

  My goal is to be able to do:

  1 backup and restore using VCB

  2. ease of management of VM creation and the cloned VM management, models and migration (moving between SAN and SATA Local data store) offline.

  HA and VMotion is not important at the moment.

  any suggestions and comments will be greatly appreciated.

  Thank you

  Kind regards

  AWT

  There is no way to "upgrade to ESX ESXi" without a complete reinstallation of the product.  If you really want instead of ESXi ESX, you should be able to just install ESX, ESXi over and tell him to keep all existing partitions intact VMFS.  You will lose all your settings (vSwitches, etc.), but you shouldn't lose all virtual machines.  In fact if the ESX host is SAN attached so you can just blow everything about ESXi installation and install ESX and reattach the VMFS LUNS to the new ESX host.  You shouldn't lose anything it. Make sure that the ESX host is not attached to the SAN when installing ESX (unplug the cable) than who has been known to cause problems.

  You will get no reduction in functionality if you stay with ESXi.  Once an appropriate license, ESX and ESXi work exactly the same.  The main differences lie in the way you manage servers with the absence of a Service Console on ESXi.  Given that VMware intends to get rid of the Service Console completely in future versions, it might be logical just to go in that direction now and stay with ESXi.

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The computer folder is empty after the use of group policy for card readers

  Hello

  I used the Windows Server 2008 Group Policy to create network drive mappings. This works for most, but on some accounts, it caused the computer folder is empty.
  For example, the folder of the computer used to have my C drive, my drive DVDROM, my USB and some network drives. Now his absolutely empty.
  If I click on start and type in C: it correctly to the my C drive and shows all records.
  If I put in a UNC path, it will correctly here.
  So the problem is that nothing is displayed in the folder on the computer.
  I tried to completely delete the user account from the C: drive and connect to the domain again, but it is always empty.
  Thanks for the help.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Editing a Site of Muse - best practices

  I have a job that is coming - the customer has already created the site of Muse & is running. They need to help editing code and do other tasks that so is the best way that I remotely get their code and update it? I just they ask their most recent .muse file? I don't want to use the change in the browser function, rather, I would like to do my editing it and to open their site in Muse. Thank you!!

  Hello

  Yes, the best if to work on the most recent file of the Muse. I found some links that may be useful

  Best practices usability | Learn Adobe Mhttp://tv.adobe.com/watch/learn-adobe-muse-cc/usability-best-practices/use CC | Adobe TV

  Mobile best practices | Adobe Muse CC tutorials

• Establishment of users to the group operators of

  Hi, I played with the creation of a user who belongs to the Group of operators. I want this group to handle all requests for delivery. I have granted the group level privileges menu, and I can see users > manage and groups > Manage. I can research groups and get results, but when I search users, apparently Virgin. So basically, I can set up users, but can not search for them. A reflection on what parameter/authorization, I need to give this group of operators?
  
  Thank you
  
  Tony

  To view the users, you need to do a group one admin for the Organization, that users are Member. Or in your case, add the operators of the Organization as an administrator group.

  -Kevin

• Windows 7 change automatically mapped printers group policy print drivers

  What does Windows 7 change automatically print drivers for printers that are mapped by using Group Policy?

  Print server is 2012 using drivers v3.
  Group Policy is mapping using deployed printers (computer Configuration\Policies\Windows Windows\imprimantes) printers and is spread to computers
  Printers card fine to the computer with the correct driver that is on the print server, then after a few minutes changes Windows 7 driver to one that is not yet on the print server.
  I tested this settings, first as activated and pointing directly to the print server and now as people with disabilities

  Policy	Setting	Comment
  Restrictions point and print	Activated
  Users can only point and print to these servers: People with disabilities Enter the name fully qualified server separated by semicolons Users can only point and print to machines in their forest People with disabilities Security prompts: When you install the drivers for a new connection: Do not show warning or rapid rise Updating drivers for an existing connection: Do not show warning or rapid rise This setting only applies to the: Windows Vista and later versions If anyone has experienced this? Or have any idea why this is happening?

  Hello Ronnie Jordan,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

  Hope this information helps.

• Best practices for the management of user access in ESXi host without 'root '.

  What is the best way to make the management of the user access to the ESXi host after you disable the default root account. Is it better to create induvidual accounts

  Via vCenter or intergrate Active directory or any other specific way.  Please help me to clarify this point. Thanks in advance for your answers.

  With the release of ESXi 5.1 it is possible to create an account on the ESXi host and assign them Full Admin privileged but there are a lot of admins of loggin in each ESXi host and user account creation.

  I would like suggestions to add the ESXi to AD and add the authorization based on domain accounts.

• Quest Desktop Virtualization (vWorkspace) user profile management issues

  Hi, I work on the configuration of the user profile with (Win 7 VDI) virtual desktop management service following the guide of vworkspace administrator 7.6 and any other docs, I found on quest.com and I have a problem with it, there is nothing in the file metaprofiles\global. It doesn't seem to work. I have a file (vdi-storage1) server with action c:\vdiuserprofiles\ created folder where the profile will be stored. I also installed the role of vWorkspace on this file server user profile management and the service is running. 5206 port is open. All the virtual desktops have pntools installed with all the options and I can see that the user profile agent is running. I can reach the storage server (vdi-storage1) using telnet on port 5206 and ping. I even gave domain user full ntfs permissions to the c:\vdiuserprofiles folder, but I don't think that this is necessary.

  -In the Managment Console > resources > (right click 'properties') user profiles

  -General: Compression: low, log level: detailed, Refresh: 5 minutes

  -Storage servers: server name: vdi-storage1, Basic file: c:\vdiuserprofiles\metaprofiles, Folder Global: Global, The TCP Port: 5206

  -Silos: name: VirtualDesktopSilo, storage for the user profile server: vdi-storage1

  -Properties VirtualDesktopSilo

  -Members: name: desktop Windows 7, Type: computer group

  - Storage for the user profile server: vdi-storage1

  - Automatic backup: 30 minutes

  The MC did create the folder metaprofiles\global automatically when I applied the settings. I use supplied with vworkspace default registry keys, and I attributed them to the domain users group. I recorded several times power on and off on the virtual desktop. I noticed 5 second delay on the virtual machine after that I typed the information identification, and before she really connects me since I activated the profile management. A I forgot something or is misconfigured it?

  OK, after having received assistance from Dell (Quest) suppor, t the issue happens to be with me remoting (via RDP) for VM directly instead of by the intermediary of the broker vWorkspace, therefore the profile could not be created because I had not the closed valid session so it never created the profile. Once I've tested it using vWorkspace connector this worked.

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.