CD/DVD drive no appears in Device Manager and is not opening?

Similar Questions

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• CD/DVD does ' t appear in Device Manager

  My CD/DVD player does not play or CD/DVD category appears in my device manager.  Any ideas?

  See if this will help.

  http://support.Microsoft.com/kb/314060

• Smartphone BlackBerry 8700 c Device Manager and does not AT ALL

  So, I recently got a Blackberry 8700 c and for some reason, the Device Manager does not work. As my computer will make a dadunk noise when I connect my Blackberry via USB cable, but it doesn't register that my blackberry is connected. I can not go on my computer and actually click on my blackberry.

  I have windows vista and the software Manager for the device that I use is that I received in the box. 4.1

  I'm also using AT & T please help.

  All I want to do is to be able to connect to my computer and download themes and all I want the phone. But it does not work

  Jsanders thanks for your help, but I managed to understand! I got the Desktop Manager 4.1 version so I downloaded and installed to 4.7. That fixed my connection problem. And while I was home I decided to take the update of the software 4.5 versio and which is installed on the phone right now. I backed up all of my information and everything.

  I took risks and went with my instinct. And I fooled with driver vista settings. So far, everything is smooth.

  I used to mod motorola phones so I had sort of an idea of what to do initially. But the Blackberry intimidates me so. Haha!

• Hard drive shows up in Device Manager, but not in 'my computer '.

  I have a Samsung HD103UI SATA hard drive in a dual docking station Thermaltake Black Widow hard drive. I connected it to my laptop via a USB port. It appears in Device Manager and says it's working properly. It however does not appear in my computer. I go to disk management and presents itself, he says "Dynamic Disk 1, invalid. If I right click on the drive, it asks if I want to convert it to base, but if I do that I will lose my data. I hooked this same configuration of my XP machine and it worked fine, no problem. How can I fix without basic conversion and how do I get it to appear in my computer?

  End to this problem, that I had the hard drive on the xp machine unload everything out of it and reformat the hard drive on my Vista laptop. I did once it worked fine and I can move it back from my xp and vista machine. It's the only way I could get this drive to work.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• WD5000AADS 500 GB hard drive. Windows XP Device Manager says it is installed and working properly, but it does not appear in my computer. Help!

  The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.

  There are a few important (to me) information on this drive and I need to do.  HELP Please!

  Thank you

  twoiron

  Hi twoiron,

  • You are able to access the other USB devices on the computer?

  See the link below and run the Fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

  If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• DVD drive icon has disappeared from the Device Manager and my computer

  DVD drive icon disappeared from the Device Manager and my computer. I m using window 7. How can I get it back.

  Ashwani Hello,

  Thanks for posting on Microsoft Community.

  There are various reasons why a CD or DVD drive may not be detected. I would like to ask all of the steps in the Microsoft Article describes a troubleshooting and check if they help to resolve the issue.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Note:

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy. For more information about backing up the registry, please see the link below.

  How to back up and restore the registry in Windows

  Hope that advice is useful. Let us know the State of the question, so that we can guide you further.

• My video card does not appear in Device Manager... it's a HELP of PNY (GeForce FX5700 VEDDR 256MBAGP GF5700VA8D25D)! DRIVER NEEDED?

  My video card does not appear in Device Manager... it's a HELP of PNY (GeForce FX5700 VEDDR 256MBAGP GF5700VA8D25D)! DRIVER NEEDED?

  -The 'legacy' drivers are not technically a restore because there was
  never a movement forward to Win7.
  They are only a newer version and probably the last, the pilot who was provided for
  Some older cards on older (legacy) systems.

• No wireless driver appears in Device Manager

  Wireless worked very well.  The next day, it shows only an Ethernet with an x through it.  Wireless at all.  I went to Device Manager and it says I have no drivers.  Went to the Recovery Manager and found the Atheros AR9285 adapter drivers and tried to reinstall those.  Still, the device manager says I have no drivers for my wireless.  Presario CQ62

  Hello:

  Try this.

  Unplug the USB Belkin adapter and download the latest drivers for your laptop's internal wireless card. You can download it on your friend's cell phone, copy it to a USB stick, plug it into your Notepad launch the driver installation file and see if it installs.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-95105-1&mode=4&IDX=2&prodTypeId=12454&prodSeriesId=316720

  Paul

• Satellite 1100 - DVD disc in the missing device manager

  My DVD Rom drive seems to have disappeared from my device manager. System will not read or write any DVD/CD.

  How to restore the disc without using the recovery disk? (That won't work because the drive does not work)

  Hello

  First of all, you should check if the BIOS can recognize the CD/DVD drive.
  If the BIOS does not recognize the drive maybe the pin connection is loose or the disk is damaged.
  If you have experience in laptop computers, you can check the connection of the PIN. Try to remove the disc and then start Notepad. After close connect the player again in the Bay and start the unit.

  Check again if the drive appears in Device Manager. If he doesn t appear I guess that it s a hardware malfunction, and you need a new.

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• How can I ensure that I have usb2 working on pavilion dv8? It does not appear in Device Manager

  Hi all

  I'm trying to configure a USB external (interface audio) on my HP Pavilion DV8 1250ea. The device driver fails to install properly and is unable to detect that the device is connected (even if I hear the Ding-Dong, and he appears in the Manager of devices, but with an exclamation point).

  I went to the device manufacturer's support and they advised me that the problem is likely to be caused by my system doesn't support USB2. They also told me how can we test this hypothesis - I looked at the Device Manager and told me I'd see something like:

  http://www.native-instruments.com/knowledge/images/General/USB_power.gif

  However, mine is:

  http://img99.imageshack.us/img99/3236/nousb2.PNG

  See, no USB2!

  I just checked the section support and chipset installed udates and other things that sounded relevant - still no change. My system really not support USB2 - it has clearly stated in the specifications that the model does support. This seems to be the most likely reason why my audio interface does not work.

  Thank you very much!

  Hello

  Click on the link below:

  How to check for support of high-speed USB (USB 2.0)