Best use of a memory of 8 GB of iphone 4S
How can I reduce the 169 request for documents and data of MD for the application of PodCast to iPod? It is without him producing anything?
If the podcast app is empty and you don't need - you can consider deleting
There is a certain amount of space taken up by the app
Settings - general - storage - storage management - < click app > - will tell you the amount of space devoted to D & D
Tags: iPhone
Similar Questions
-
Best place to buy memory A60-155
Where is the best/cheap to buy memory for an Equium A60-155?
I have so many problems with my A60 - 155 - it is the worst phone that I have used for some time and I would get my money back if I could without a second thought.
But as I'm stuck with it for now, I heard that upgrading the ram a little can help with it is seriously poor Celeron processor.
Hi Matt,
I received my upgrade of RAM of Orca logic (see the following URL). I have not had any problems with the new modules and they have continued to function correctly in my A30-141.
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=13321&ft=m&St=3HTH
-
Question about the use of the memory modules
I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speed
and by using the 1 GB + my old 256 with less speed
which option will contribute more?Hello
The fact is that if you use 2 different memory modules with different properties (of lower performance) so the laptop can run with lower performance. This means that the 256 memory module slows down you memory. The best way is to use the same modules having the same properties.
-
My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you
Hello nonmae,.
You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.
You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Why firefox uses so much memory?
For several months, Firefox has eaten memory like crazy. Once I get more than 5 tabs open or that you have Firefox running for more than an hour, the memory usage hit about a GB. If I continue to let go beyond that, it will hit 1.5 to 2 GB and it made my gel set office. I got to keep the Task Manager and every hour or so just kill Firefox and restart. Preventing it from crashing my whole desktop computer. It's definitely worse when I opened Google products, especially maps and Docs. GMail is generally OK.
I tried to disable literally every add-on and Extension (including Flash and Adblock).
I'm on Windows 7, I have 4 GB of RAM installed. I am on version 40.0 Firefox, but this has happened through a few updates now (I think the problem started around March or April). I also tried to back - rev Firefox and go to the latest version, that I had before the problems started, but that did nothing either.
Chrome works fine on this machine without any similar problems - but I prefer Firefox!
Separate the issue;
Shows details of the system;Plug-ins installed
Adobe PDF plugin for Firefox and Netscape "9.5.5.
is obsoleteFirefox using too much memory (RAM) - how to fix
This article describes how to make Firefox use less memory to make it run faster and prevent accidents.https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster
https://support.Mozilla.org/en-us/KB/Firefox-uses-too-many-CPU-resources-how-fix
https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding
-
My Safari is using too much memory
I use Safari 9.1.1 on my iMac (OS X 10.9.5)...) Last week, Safari uses too much memory causing my computer to slow down and own memory has automatically free up space. I use the same sites in multiple windows. But it will bring my RAM available to a dangerous level of 2 MB...
Memory will make things worse. The amount of RAM is installed?
-
Hello
I had this problem a weakness there, I made any suggestion that this link said and it did not help:
https://support.mozilla.org/ar/kb/firefox-uses-too-much-memory-ram#w_disabling-memory-consuming-plugins
I have no many taps oppened taps only 47.
My firefox now usiing 2 GB ram, can someone help me how to fix it?
Thank youI tried 'back of ram' add and activate acceleration on my GPU and it worked, it did not use more than 200 MB with the same number of notches before
Thank you very much
-
AVG says using too much memory because multiple firefox is open, but I only see one.
AVG regularly analyzes in the background. Lately he has demonstrated a popup window that says multiple applications of Firefox are running and using too much memory, so I should close some. But I can only see 1. Tried CTRL ALT DEL to see if I could find the answer, but only showed 1 firefox, and that he used more than 28 000. So I think that AVG is correct, but does not know how to see what who or where they are. They DO NOT display in the lower menu on the main screen, so I guess they are in the background. Do not have the virus, and Firefox, regularly updates itself. What should I do to fix?
Hi cmich80220.
It is true, that you should only be able to run only one instance of Firefox at the same time. I searched but could not find someone else with a similar problem. If the problem comes back to Firefox running slowly, you can consult this article for troubleshooting:[Firefox is slow]]
Hope that helps.
-
ITunes is downloading all items purchased from my iPhone, including tv shows and movies, using all the memory and batteries, does anyone know how to stop this?
Hi anthony248,
If you don't want the automatic downloads enabled on your iPhone, follow the steps outlined in the article below, except that you will turn off the switch rather than turn them on. I'll also include a link about the storage capacity of your iPhone and how to delete items that you don't want.
Check your storage space on your iPhone, iPad and iPod touch
Take care
-
How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?
Keep all the files on external hard drive image? Nothing else and no pictures on the desktop?
Keep all image files both places?
What is the best way to go through thousands of images in the Organizer to identify and place them in files?
Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?
As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!
As I only have the version of the EP, here is some info on the organiser:
https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html
Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.
-
I use 37 GB of my memory to documents on my Iphone. I don't know what it is or how even know what it is
There are several ways that you can potentially solve this problem. Restore the phone via iTunes would probably be easier, use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support
This article will show you how to restore through iTunes.
How to back up your device using iCloud or iTunes - Apple Support
I would use the link above to save your phone before you restore it so that you don't lose all your data and then restore the backup to the phone to see if the space is always taken to the top.
I hope this helps.
-
Hi all
I am trying to write a code for pic Pic 2 dimensional on a large enough data file (about 1000 x 72000 points). The results of this should be integer values where each peak has been reduced to its maximum point for later statistical analysis (see attached code). The problem is when this code is executed, the VI quickly eat through all of the available memory and crashes. I'm under a system with 3 processors and 4 GB of ram, and the program has crashed every time after using approximately 3.5 GB, so I need to find a way to reduce the use of the memory of this VI. My VI and an example of data file is attached. Thank you.
<><>
First of all, read 1000x72000x8bytes = ~ 600 MB for one copy in memory is pushing it. Then you have additional copies in the two graphs.
All your values seem to be small integers, so a U8 2D table would work just as well using 8 times less memory space.
Then you send these massive arrays of two graphs of intensity. The number of pixels in your chart is a small part of the picture, so you will have to reduce the data to display. Graphical representation of the 72000 columns on a less than 1000 pixels wide screen is ridiculous.
-
Acquisition of images with 3 USB cameras causing too many uses of the memory/cpu
Dear experts,
I'm trying to capture images with 3 cameras USB, located in 3 different positions. I have to initialize each cameras using USB list vi camera when switching between cameras. I realize that, by making this method causing too many uses of the memory/cpu and can cause CPU hang up. If I stop the program, the memory/cpu counter are down.
Do you know how to reduce this problem.
Thank you
Hart
-
Use of FIFO memory on two areas of clock (Labview FPGA) block
Greetings!
I'm developing an application on the FPGA of the vector signal OR 5644R
transmitter/receiver. I have two loops single-cycle timed: a 40 MHz making a convolution
and writing a FIFO memory block and the second at 120 MHz (sample clock)
who reads from block FIFO memory and uses the following values
interpolation...Under what circumstances is it permissible to use a FIFO memory block to transfer
values of a loop from 40 MHz to a loop of 120 MHz (sample clock)?
The reason I ask the question, it is that the compilation of my code repeatedly of not
reported the error below:ERROR: HDLCompiler:69 - "/ opt/apps/NIFPGA/jobs/J9k7Gwc_WXxzSVD/Interface.vhd" line 193:
is not declared. I share for everyone's reference, screenshots of my code which is an extension of
sample 'Project streaming VST' given in NI5644R. A brief description of attachments is
given below...
1. "Top_level_FPGA_part1_modification.png": in a loop SCTL 120 MHz, a sub - vi bed FPGA
go a block FIFO memory... In fact, the reading is actually made when entry
"read_stream" is activated... (see details in read_from_fifo_true_case.png)
2. "Top_level_FPGA_part2_modification.png": a 40 MHz SCTL, wherein is a subvi FPGA
called to write the output of convolution to block FIFO memory.
3. "target_respone_fpga_block_FIFO_modification.png": an output of a convolution filter is
written in block FIFO memory each time that the convolution output is available...
'ReadBlockFIFO' VI (circled in Top_level_FPGA_part1) is invoked in a 120 MHz SCTL.
4. "read_from_fifo_false_case.png": when the input "read_stream' of this vi is false,
data transfer memory FIFO of block to a different FIFO ('generation filter") takes
place.
5. "read_from_fifo_true_case.png": when the "read_stream' is set to true, the data is read in
'Filter generation' FIFO and spent on the chain of later interpolation to the
120 MHz SCTL...
I hope that the attachments give enough clarity to what I'm doing... If we need
For more information, do not hesitate to ask...
Kind regards
S. Raja Kumar
Greetings!
I think I understand the problem... The error probably occurs because a DMA FIFO
(FPGA host) is playing at 40 MHz, and it is checked for the number of items in a loop
120 MHz... It is not captured by the "pre-processing" by the labview FPGA, but by the Xilinx
compilation phase synthesis tool.
A lesson I share, is that if you observe this kind of problem, watch if there is incompatibility
in the areas of the clock to access a FIFO...
Kind regards
S. Raja Kumar
-
How to set the use of video memory on the graphics card to my laptop cq56-110us?
Hello
I have a PC Compaq laptop CQ56-110us. Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB. I want to reduce the use of video memory, i.e. 256MB. Is this possible? If yes how. I would appreciate help with this.
Thank you
Don
Don, welcome to the forum.
Built-in memory is allocated by the system. As more video memory is required, is allocated. There is no way that you can change.
If your problem is solved, please click "accept as a Solution.
Maybe you are looking for
-
Firefox worked fine with AOL mail for years. It is now useless. Sometimes he even not open AOL mail and when it's the 'response' and 'forward' does not work. Now I have to go to IE to use AOL mail
-
Pavilion 14-b109wm: administrator password forgotten
I tried start it but I forgot and after 3 attempts, I was given this code: 84247812
-
Uninstallation of MySQL or reset the default settings (advanced question)
I am trying to install an application that is based on the MySQL server. I've been installing other programs and for security reasons, I changed the password for the server parameter access to MySQL. It worked well for other applications I installed
-
Apple tells you a virus and to use Mackeeper
I get a virus warning them they tell me use mackeeper to clean tap of snake
-
(Xperia Ray) Can't install Apps after ICS put updated!
Hello world. I bought mine (Xperia Ray) a few days ago and updated with the update for ICS service software. now, I can not install all the apps. When I click the button install (photo), where it shows the permissions the application needs, nothing h