Best way to add the query?

Similar Questions

• ADF12C: The best way to add the filter of the table of af: selectBooleanCheckbox

  I have an af:table in my page and the default filter is enabled for all columns.

  I have a column of type checkbox. I would like to add the checkbox to filter to filter the checked and uncheck the data. My checkbox data are mapped to 0 and 1

  

  My code:

  < af:column headerText = "#{bindings." ABC.hints.Col1.label}"id ="c7 ".

  sortProperty = "#{bindings." ABC.hints.Col1.name}.

  filterable = "true" sortable = "true" >

  "< af:selectBooleanCheckbox value =" #{row.bindings.Col1.inputValue} "label =" #{row.bindings.Col1.label} "disabled ="true"shortDesc =" #{bindings. " ABC.hints.Col1.tooltip}"id ="sbc1"/ >

  < f: facet = name 'filter' >

  < af:panelGroupLayout id = "pgl2" halign = "center" >

  < af:selectBooleanCheckbox value = "#{vs.filterCriteria.Col1}" autoSubmit = "true" id = "sbc2" / > "

  < / af:panelGroupLayout >

  < / f: facet >

  < / af:column >

  I have to use < f: facet = 'filter' name > option to implement, but get the error below.

  "ORA-01722: invalid number."

  Any help is appreciated.

  Thank you

  Luke.

  You are welcome.

  Can you close it please message by checking one of the answers as Correct?

• Best way to abbreviate the query

  Is there an easier way to shorten this "less the request" without using negative? Some kind of subquery?
  
  
  Select a.sa_status_flg, a.end_dt, a.acct_id, Acct, c.prem_type_cd, b.rs_cd as, a.char_prem_id as PremiseID, z.char_val as MTR, d.sp_id SP, c.address1_upr as the address
  Of
  ci_sa one
  ci_sa_rs_hist b
  c ci_prem
  ci_sp d
  ci_sp_char z
  where
  a.sa_id = b.sa_id
  and a.char_prem_id = c.prem_id
  and c.prem_id = d.prem_id
  and d.sp_id = z.sp_id
  and (z.char_val = ' 5/8 "' or z.char_val = 3/4"' or z.char_val = 1 "' or z.char_val =" 1.5 "' or z.char_val = 2"' or z.char_val = 3 "' or z.char_val = 4"' or z.char_val = 6 "' or z.char_val = 8" "' or z.char_val = 10 ' ')
  and a.start_dt < 31-dec-08'
  and a.cis_division = '110'
  less
  Select a.sa_status_flg, a.end_dt, a.acct_id, Acct, c.prem_type_cd, b.rs_cd as, a.char_prem_id as PremiseID, z.char_val as MTR, d.sp_id SP, c.address1_upr as the address
  Of
  ci_sa one
  ci_sa_rs_hist b
  c ci_prem
  ci_sp d
  ci_sp_char z
  where
  a.sa_id = b.sa_id
  and a.char_prem_id = c.prem_id
  and c.prem_id = d.prem_id
  and d.sp_id = z.sp_id
  and (z.char_val = ' 5/8 "' or z.char_val = 3/4"' or z.char_val = 1 "' or z.char_val =" 1.5 "' or z.char_val = 2"' or z.char_val = 3 "' or z.char_val = 4"' or z.char_val = 6 "' or z.char_val = 8" "' or z.char_val = 10 ' ')
  and a.end_dt < 1 January 09 '
  and a.cis_division = '110'
  

• What is the best way to add libraries to a project?

  What is the best way to add technology to the ADF? For example log4j. Or the on-board recorder features log4j?

  Hello
  Hope useful

  http://technology.AMIS.nl/Blog/8380/manage-JDeveloper-external-libraries

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• Best way to discover the top N

  Hi all

  Sorry to ask a question on Friday. I've had this issue for some time now, what is the best way to discover the first N?

  For example, how do you know top 10 Web hosts that have the highest use of CPU for a certain period of time.

  One way to do is to create a WCF application that returns topN HostCPUs order to use/period/average. When the interval is small, like the last hour, it works, but if I increase the time range from 1 day, the request will expire after 60 seconds. We have 500 + guests on this FMS. Not only we want to watch the hot servers right now, but also want to watch the hot servers say yesterday, or last month.

  Another way is to use groovy code below, when I use retrieveLatestValue to get the current value, it's fast, but if I replace it with retrieveAggregate and make the time range for the previous 24 hours, it takes a few minutes to run.

  #! HostCPUs # .getTopologyObjects (extinguish) {a, b->

  go = server. DataService.retrieveLatestValue (a 'use'). value?. AVG

  If (goes == null)

  go = 0

  VB = server. DataService.retrieveLatestValue (b, 'use'). value?. AVG

  If (vb is nothing)

  VB = 0

  VA - vb > 0? 0: 1

  } .subList (0, 10)

  Then, of course, these are not very effective. Is there a better way to get this top N list I'm looking for?

  Thank you

  Xiaoning

  Here is an example of the batch api to query the memory of the virtual machine, and then I take action on a specific period of time.

  import com.quest.nitro.service.sl.interfaces.data.IDataService;

  import com.quest.nitro.service.sl.interfaces.data.ObservationQuery;

  import com.quest.nitro.model.topology.TopologyObject;

  import com.quest.nitro.service.sl.ServiceLocatorFactory;

  Import org.apache.log4j.Logger;

  def LOG = Logger.getLogger ("batch.query.test");

  topologyObjects = new HashSet (#!) VMWVirtualMachineMemory # .topologyObjects);

  Log.info ("topology objects querying ${topologyObjects.size ()}...");

  endTime = System.currentTimeMillis ();

  startTime = endTime - (4 * 60 * 60 * 1000 L);

  IDataService dataSvc is ServiceLocatorFactory.getLocator () .getDataService ();.

  Query ObservationQuery = dataSvc.createObservationQuery ();

  query.setStartTime (startTime);

  query.setEndTime (endTime);

  Query.include (topologyObjects, "active");

  Query.include (topologyObjects, "affected");

  Query.include (topologyObjects, "zero");

  result = dataSvc.performQuery (query);

  long term = System.currentTimeMillis () - endTime;

  Log.info ("request completed in ${duration} ms.");

• best way to add a CURVES layer

  Hi all

  I am writing to you the best way to add an ArtLayer with a script.

  I already know that it is possible to add an Artlayer, and then change the layer.kind to the TEXT property.

  But unfortunately it is not possible to add change this property to LayerKind.CURVES.

  
  

  Here is an example

  /**
   * Function to add a layer to a Document
   * @param {LayerKind} layer_kind, the type of the layer (CURVES, TEXT, SELECTIVECOLOR)
   * @param {Document|LayerSet} [obj = app.activeDocument] the obj which contains the new layer
   * @return {ArtLayer} layer the added layer
   * @todo add a better test to check if layer_kind is an enum of LayerKind
   * @toto add control the layer is background or not
   * @todo https://forums.adobe.com/thread/1601245
   */
  my.add = function (name, layer_kind, obj) {
  
     if (obj === undefined) {
     var obj = app.activeDocument;
    }
  
     if (typeof layer_kind !== 'object') {
     throw {
     name: 'InvalidArgumentError',
     message: 'you must enter a valid value for the param layer_kind [CURVES, TEXT, SELECTIVECOLOR, etc.]',
     fileName: $.fileName,
     lineNumber: $.line
     };
    }
  
     var layer = obj.artLayers.add();
  
     layer.kind = layer_kind;
     layer.name = name;
  
     return layer;
  
  }
  

  So the only way to add different type of layer should use listener Action Script?

  I'm a little confused, because it would be much better to be able to change the layer.kind property.

  In advance, thank you very much for your help.
  Best account.

  Don't forget your does not deal with Adobe here it is the user forums.  If you want changes made to Photoshop scripts that you need to address Adobe please use Photoshop family customer community and submit a suggestion.

  Adobe DOM is limited without Manager Action code via ScriptListener Photoshop script script is not very useful because limited methods of model DOM of Adobe Photoshop. Many Photoshop features are not supported and the supported features can be supported in a limited way.

• Best way to limit the iOS devices?

  What is the best way to limit the compatibility of my AIR application so that users with the iPhone/iPod 1st-3rd generation cannot download it from the app store?

  I am about to submit my AIR application for Apple app store & have designed so that it works well on iPhone/iPod 4 + and all iPads. So, I would exclude users with older iPhones/iPods of the possibility to download it.

  I searched online and a number of people suggest adding a restriction based on requiring front facing camera.

  that is, adding the following line in the info.plist file:

  <key>UIRequiredDeviceCapabilities</key><string>front-facing-camera</string>

  But, I read the posts of some people who have tried this and it worked: he did not exclude iPhone 3GS. See the last post here.

  Can anyone confirm that it is a reliable method? I understand there is a small chance Apple will reject your application based on the fact that you add an unnecessary exclusion - that is my app requires in reality a front facing camera.

  Also, I noticed that another approach is to restrict the version of the OS. If you want to restrict the minimum version of the operating system of 6.2, which should exclude iPhone/iPod 1st-3rd generation like iPhone 3GS not going only up to OS 6.1.6 I think.

  So, the solution would be to add the following in the descriptor xml file:

  <key>MinimumOSVersion</key>
<string>6.2</string>

  The 3GS is not compatible OS7 (OS6.1.6 I think is the last) then you can simply apply OS7.

  To do this, in your , you can specify as follows:

  MinimumOSVersion

  7.0

  
  

  Edit:

  
  

  Hey Yes, I see that you've done your homework. You can choose 6.2, but there is really no reason. iPad1 is locked in OS5 so you lose (very small part of the market) but the iPad2 and up supports OS7 and iPhone 3GS cut so 4 and below you really need to specify OS7 and up to. 6.2 would work as well. If you need support iPad1 so it is not ideal.
  

• Best way to extend the partition?

  Do you have a Server 2003 P2V to new hardware.  I used Acronis to clone the server cold, created a new virtual machine, restored to the virtual machine with Acronis, configured with VMWare Converter and then add the VMWare tools, etc.  Everything seems to be fine, except the food not extend the partition.

  I put a partition of 100 GB for the virtual machine, but restoring recreated the original score of 68 GB and another 'unallocated' 31 GB.

  What is the best way to extend the partition, so we can use all of the 100 GB?

  Thank you for your time.

  If a C: partition, you can use extpart, but a c partition: no, you can use the construction in the diskpart tool and extend. With one exception: If you have multiple partitions on a single HARD disk, you will need to use VMware Converter.

• Best way to present a query recordset to a remote server

  Hello, everyone.

  I was responsible for a project that will involve querying a table on a server, then send the data to a remote server that will take the data and insert it into another database (the two db cannot communicate directly with each other).

  I've never had to do something like that before.  What is the best way to get the desired results?  Is it possible to "petition" (anywhere from 1 to 5 files at a time) to the remote server without incorporating WDDX?

  CF9 environment, soon CF10.

  V/r,

  ^_^

  Hi, @BKBK,

  Not allowed.

  This is the kind of tedious, but I've worked so far is having CF1 select data from DB1, SerializeJSON data, cfhttp allows to VALIDATE data for CF2.

  THEN, CF2 DeserializeJSON data in a query object and that insert into DB2.

  Unless you think there is a better way to do it?

  V/r,

  ^_^

• Best way to add numbers or available several pages

  I have a ticket that needs to be numbered. It is small enough to mount 5 on a sheet of 8.5 x 11.

  Each ticket must be numbered.

  I can do a master page and adds all the numbers in this way and then make a pdf.

  What is the best way to get the numbers on tickets that are printing 5 up on a sheet and I can print via a copier?

  There are several ways to do this:

  1. create single page tickets, numbered by car and use institution the Copier feature (if available and access to the)

  2. use the data with the numbered list merge and produce several cliché recording to create a 5 - up document

  3 create a 5 - model up with block of text frames for import of numbering, a numbered list that flows into the document

• Best way to write the Pl/Sql

  Hi all
  Can someone say best written below stored proc:
  
  procedure missing_authorized_services is
  v_truncate_sql varchar2 (200);
  v_sql varchar2 (2000);
  BEGIN
  v_truncate_sql: = "truncate table missing_authorized_services;
  immediately run v_truncate_sql;
  commit;
  
  v_sql: = "INSERT into missing_authorized_services select distinct trim (service_group_Cd) as service_group_Cd, trim (service_cd) as stage_1_mg_service_request service_cd
  where (service_group_cd, service_cd) not in)
  Select distinct service_group_cd, stage_3_servcd_servgrp_dim service_cd)';
  
  immediately run v_sql;
  commit;
  
  END missing_authorized_services;
  
  
  / * I do select the table and then try to insert into another table the result set * /.
  
  Please help,
  Thank you
  J

  Hello

  The best way to write the PL/SQL (or any code) is by small steps.
  Start with a very simple procedure that does something (anything), just enough to make sure it works.
  Add a lot of statements of output so you can see what made the procedure. Don't forget to delete them after that trial is over.

  For example:

  CREATE OR REPLACE procedure missing_authorized_services IS
          v_truncate_sql  VARCHAR2 (200);
  BEGIN
       v_truncate_sql := 'truncate table missing_authorized_services';
       dbms_output.put_line (  v_truncate_sql
                      || ' = v_truncate_sql inside missing_authorized_services'
                      );
  END      missing_authorized_services;
  

  If you get any errors (for example, ORA-00955, because you try to give the same name to a procedure that you already use for a table), then fix the error and try again.
  When he worls perfectly, then add another baby step. For example, you can add the line

  EXECUTE IMMEDIATE v_truncate_sql;
  

  and test again.

  Do not use SQL dynamic (EXECUTE IMMEDIATE) unless you have to.
  Is there a reason to use dynamic SQL for INSERT statements?

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ

• best way to clear the cache on an iMac 2011 - el capitan

  best way to clear the cache on an iMac 2011 - el capitan

  The best way is not for everyone. Clear the caches unnecessarily makes your computer run more slowly while they are rebuilt. Did you have a specific problem that you thought that clearing cache can solve? If so, post on the real problem.

• What is the best way to use the Y50-70 battery please?

  I bought the laptop y50-70

  but I want to know what is the best method to use the battery.

  and the best way to recharge.

  NOTE *.

  IAM always use the cable and I gave the battery except a few times.

  Thank you very much..

  Best way to use the battery, if your laptop should ALWAYS be connected in-

  Go to eat energy Lenovo - should be a RED icon in the system tray - and choose the mode for a better health of the battery (or battery Protection or health of battery optimized mode).

  I don't know what the energy Manager version you have, but the option must seem similar. What it does is, it will keep your battery charged ONLY up to 60 percent and will increase its service life.