Best way to insert a signature by hand

Similar Questions

• Best way to insert pages from one document to another

  Hello world

  I have to add/insert the pages of an InDesign CS4 document with all the content that may be present in the page to the other.

  What is the best way to implement who? I did find something similar to kAddDocToBookCmdBoss.

  The optimum would be to have something like kAddPageToDocCmdBoss for a better granularity.

  Thank you in advance to anyone who will express his opinion.

  Luca Severini

  The wheel of the Pages panel menu has an action "move Pages... "dialog.

  It fires off the coast of several commands:

  kCreatePageFromPageCmdBoss

  cmd target is the target document

  UIDList is the kSpreadBoss of the source.

  Document IID_ILAYOUTCMDDATA is again the target doc.

  monitoring of kMoveSpreadCmdBoss and kShufflePagesCmdBoss.

  Dirk

• Best way to insert without flash photo album in Dreamweaver CS5.5

  Using Dreamweaver CS4, I created the site art of my wife.  It is: www.tanglewoodbrushstrokes.com

  To insert photo albums, I used the bridge and Fireworks.  Once past the initial learning curve, I was able to create these albums easily.  However, these albums have two limitations that I would like to address.

  1. Add or remove an image requires the creation of a new album and then display on the page.  Now when I practice, is not take me very long to do this, but there must be a simpler way.  As you can see on the site of my wife, she has many pages of photo albums.  Take pictures of her "Recent works" page means that these pictures my be paid during three or four different albums.  If this can be very time consuming.

  2. the created albums in this way are the flash galleries and are not visible on iPhone or iPad.

  Recently I bought Dreamweaver CS5.5, I can use HTML5 to make my site on Iphones and Ipads, but also PC.  I have almost completed the tutorial and I'm about to create a new site.  Today I did some looking of ways to use the galleries without flash and not come up with a definitive answer.

  As you can see on the Web site of my wife, the galleries are fairly simple.  What I really need is a page of thumbnails leading to a larger image and a description.  I want to keep it like that.

  Any suggestions?

  There is no single all size the solution to this.  You use DW make a gallery and it isn't really a tool for creating Gallery in itself.  It's web authoring software.  So, whatever the solution to the gallery you choose it will come from somewhere else.  And then you have to integrate into your HTML pages.

  Personally, I love the dynamic slide shows with jQuery.  Add PHP code on your page.  Download jQuery scripts and optimized images on your server.  Fact.

  To swap images later, add/remove files from the folder of the image on the server. Fact.

  You can see a live demonstration of the below:

  http://ALT-Web.com/DynamicSlides/

  http://jAlbum.NET/

  If you want to generate a large number of different galleries quickly, look at JAlbum.  It is a commercial product that creates the thumbnails and HTML pages for you.  There are a lot of skins (styles) to choose from and you can further customize layouts with CSS.

  http://www.Projectseven.com/products/galleries/SSM/index.htm

  PVII Slide show Magic - extension for Dreamweaver
  

  jQuery Fancy Box ~

  http://FancyBox.NET/

  Free solutions 57 picture gallery with jQuery.

  http://www.1stWebDesigner.com/CSS/57-free-image-gallery-slideshow-and-lightbox-solutions/

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• Best way to insert the degree symbol?

  Hello

  I have a form of inspection put in place for the health/restaurant inspectors.    Often during an inspection, they need get food temperatures and want to use the degree symbol.    They run this form on a tablet pc convertible, so a normal keyboard is not available for them in tablet mode and in laptop mode using the combination ALT + 0176 is always a PITA bread, because the keyboard doesn't have a full numeric keypad and people using this form are not the most computer people there in order to activate the endable keys function keys , then enter an ASCII code several times during an inspection.

  I was looking for a suggestion on how to inforporate something in the form in order to get the degree symbol into any text field, they run in the position of the cursor.

  The idea, I look for are:

  1.) command A button that inserts the symbol, but I'm afraid that by clicking on the button would lose focus of the destination field and it would be necessary to have a lot of scripts to remember which field was the last that they were to put it in the right pair.

  2.) event button or on the charge that inserts somehow the degree symbol to the Clipboard in Windows, but during an inspection, they can copy and paste something else so it compensation to.

  (3.) a kind of auto-remplacer text.  Not sure if this is possible in a form of adobe.  For example if they type 'deg' have the auto form replace it at "°".

  (4.) a special key press.  Not sure if Adobe can tell a special sequence of keys not used by Adobe and Windows, CTRL + D, hurry once insert a degree symbol in the current location.

  5.) kind of place a special icon on the toolbar of Adobe to insert the degree symbol in the place currently?

  Those who have some ideas that I think.  Many are probably dead ends.   If you have had this problem, how will you address it?

  Thank you!

  -Mike

  I ended up using a simple replacement that I was mentining in my previous post, as to the types of inspectors "blah blah blah at 51 deg blah blah blah" and then leaves the field, FormCalc will replace the "deg" with "° F" so that the text now reads "blah blah blah blah blah blag from 51 ° F".

  I just need to train my inspectors to type "deg" exactly to have already it automatically.

  Replace "deg" by "° F" when the user leaves the field.

  $.rawValue = replace ($.rawValue "deg", "° F")

• Urgent.What is the best way to insert '-'.

  Hi all, I have a table with a column col1 and these test values:
  
  col1
  ABC MANILA
  ABC CEBU
  ABC DAVAO
  
  The desired output must be
  col1_formatted
  ABC - MANILA
  ABC - CEBU
  ABC - DAVAO
  
  I use this code:

  SELECT    SUBSTR (col1, 1, INSTR (col1, ' '))
         || '-'
         || SUBSTR (col1, INSTR (col1, ' '))
    FROM test

  I just want to know if there is a better way. Help, please. Thank you

  Hello

  Try this and let us know.

  SELECT    replace(col1,' ',' - ')
    FROM test
  

  See you soon
  Kanchana

• Best way to insert data into instances of the custom class

  Hello.
  
  I have created a custom class (mySuperClass) in an .as file, defined constructor methods, properties, and the get/set. Now in the main .fla I must declare a large number of instances of this class and complete each property. The 'proper' method, I guess, would be to:
  
  var super1:mySuperClass = new SuperClass();
  super1.setProperty1 ( value1_1);
  super1.setProperty2 ( value1_2);
  ...
  super1.setPropertyN ( value1_N);
  
  ...
  var superM:mySuperClass = new SuperClass();
  superM.setProperty1 ( valueM_1);
  ...
  superM.setProperty1 ( valueM_N);
  
  However, with large quantities of variables and information that share the same basic characteristics, I feel always attempted to do through a cycle of dethrone. In that case, I'd probably build tables with the properties to complete.
  
  So I want to know is how would you guys do it? Are there other ways to do it?
  
  Thanks in advance.
  
  

  Well, the example is based on an object that has a datamodel and which can be any object of course. Now, assuming that the data come Let's say an xml file, I would use a function as the code to generate a collection of objects.
  Edit: so the StoreItem instances are created on the fly and saved in the collection

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• I want to show a hand wiping snow off the screen. What is the best way to do it?

  I want to show a hand wiping snow off the screen. What is the best way to do it?

  You might try shooting through the snow on a green plastic non-brillant/Matt surface, have a camera on a tripod to research on snow and wipe the snow with your hand, pushing as well, otherwise all of the snow, so you find yourself alone with the Green surface. Then, go through the many Keylight tutorials out there to key on the Green and just the snow and the hand.

• Using CS3, I want to insert a picture on the active page of my site folder. What is the best way to do it?

  Using CS3, I want to insert a picture on the active page of my site folder. What is the best way to do it?

  The current folder simply reflects what you have already inserted in your site.

  Save images to your Site Local DW folder from your graphical application or move/copy using the file manager of your operating system (Mac Finder or Win Explorer).

  In DW, use the Insert menu to insert images directly into your web page.

  Nancy O.

• Best way to make an Insert or Update

  I do a few insert/updates via php to oracle.

  Each of them will return an id to php.

  If its an insert, it will return the new id (generated by a trigger and sequence)

  If its an update it returns the identifier.

  Is the best way to do this with a separate insert statement and unfavourable update?

  Or a merger for both? I like merge, but then how do you return the ID in the same statement.

  Pleiadians wrote:

  If the id is generated by a trigger, you will have no control over the sequence and have question the id after insert/update.

  In this specific scenario where you want to return the id, it may be better not to use a trigger, but to explicitly call the sequence.nextval and store it in a variable, then you can return it at the end of the function.

  Why?  You can always use a trigger and return the value in a variable...

  SQL > create table mytable (id number, myval varchar2 (20))
  2.

  Table created.

  SQL > create the sequence mysequence
  2.

  Order of creation.

  SQL > create or replace trigger trg_mytable
  2 front of insert on mytable
  3 for each line
  4 start
  5 Select mysequence.nextval in: double new.id;
  6 end;
  7.

  Trigger created.

  SQL > set serverout on
  SQL > create or replace procedure insert_rec (val varchar2) is
  2 v_id number;
  3. start
  4 insert into mytable (myval) values (val)
  5 return id in v_id;
  6 dbms_output.put_line (' record inserted with id: ' | v_id);
  7 end;
  8.

  Created procedure.

  SQL > exec insert_rec ('Test');
  Record inserted with id: 1

  PL/SQL procedure successfully completed.

  SQL > exec insert_rec ('Test2');
  Record inserted with id: 2

  PL/SQL procedure successfully completed.

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

• What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  I have an iMac with a capacity to 1.11 - 679,49 GB available. With the software updated.

  Model name: I

  I have emails out of my different accounts in a "random" folder, but is not free up space. If I move an email in "Archives" and then it always remains in the e-mail account, apparently duplicate email in two places. "

  ERGO: the question is...

  What is the best way to consolidate e-mail messages in the e-mail program, before deleting?

  (I hope I've inserted which may be useful, but I'm not sure about that.)

  Thank you

  ilenefrombaltimore

  Archive messages or move them to some other local mailboxes or mailboxes on the server. Don't know what you are trying to do because it appears that you have 2/3 of your hard disk.

  Why do you think archiving emails in 2 places? Where are you trying to save space to?

• Best way to send signals between the two screws

  Hi all

  I have two screws that generate some complicated signals (sine wave, pulse, etc.). The other one takes manually entered the tension and pressure send to certain material with a pump and reads the output of the pump.

  

  What is the best way to send the waveform of the signal VI the VI hands-on? I still need to be able to control the signals manually in this manual control VI.

  Thank you.

  Your user interface would handle this. If you use a machine to States (hint-hint) you would simply chose the State appropriate for your current configuration. You would provide a mechanism (UI, configuration file, argument of command line to name a few) for the parameter which mode to use, and the application would have chosen the appropriate action.

• Best way to control and enforcement multiples (up to 20) deals independently in LV

  Hi all

  I am building an application in BT to control independently and methods of running multiple (up to 20), i.e., it should be able to start and stop one of the processes at a given time. What would be the best way to code for this? On the top of my head would be to use a single notification utility for controlling each process, but I think that maintenance of code can be a handful with this number of reporters being defined. Are there more effective ways to do this?

  Appreciate any help and idea on it. Thanks a bunch!

  This nugget is launching several threads and slap them with Occurences. Convert this example on notifiers and you good to go shouldb.

  I have developed applications with more than 100 background threads using variations on the theme there.

  Ben

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.