Help solve the kind of invalid application

Similar Questions

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Error 213:10 on windows 10. Please help solve the problem

  Error 213:10 on windows 10. Please help solve the problem

  Different code, but can help - error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

  Run all programs as Administrator http://forums.adobe.com/thread/969395 to assign FULL... Permissions said yet, but it is sometimes necessary for Adobe

• iPhone iOS 9.2.1 5 c screen flickers once in a while. It's okay if I use an app or text my screen flickers and is based on an application or if I TEXT it random characters of text. Help solve the problem

  Title says it all. I need help with the issue fixed.

  Making a reservation at your nearest Genius Bar - Apple Store - analysis is free

  If no Apple store nearby, take it to the Apple authorized service provider - they establish their own assessment policies > https://locate.apple.com/

  Apple does NOT endorse them, but there are folk of 'independent' service which can do a very good job (caveat emptor)

• Please need help with the deployment of web applications in Jdeveloper 12 c

  Hello

  I'm desperate for help guys. am trying to deploy a web application in weblogic server, but nothing works!

  I have created a project in jdeveloper and created a jsp page in the project, what I want is to run this page!

  I followed the instructions here: Deployment of Applications Web Fusion , I don't really know if I did good or bad, the document is too detailed and not understood clearly.

  I am a newbie oracle user and trying to build a jsp web application connected to the oracle database. fails application deployment it says: cannot run application deployment IntegratedWeblogic error...

  Please could you tell me the steps of deploying applications in Jdeveloper 12 c?
  What deployment profiles, I need to create (ear, war, mar)?

  This deployment descriptor, I need for my application work?

  Please guys I am newbie to oracle, if you could give me simplified answers and straight instructions it will be appreciated .

  Thank you

  It depends on your knowledge of jsp and the possible controllers like struts, the faces and the adf (which is an addon of jsf). ADF has the advantage that a large number of configurations and other stuff is handled for you. However, if you are familiar with Struts you can use it too.

  The decision also depends on demand and what he should do. I can't comment on this, as I don't know.

  As you use 12 c my recommendation is to use the stack complete adf, meaning adf faces and adfbc for access to the data in the Database.

  There is a license for the adf if you want to deploy on a WebLogic Server, however there is a free version (adf essentials) that uses a GlassFish server.

  Timo

• Need Urgent help on the problem of Autocad application on a virtual desktop performance

  Hi all

  I was faced with a delicate issue with the VDI implementation that was carried out a few months back.
  The client uses a few applications Auto CAD on HP thin clients and portable computers.
  They have questions only on thin clients HP and all works fine when using the dedicated portable computers.
  When accessing files Autocad a few kilobytes, they are able to function properly on thin clients because there is no lag when they zoom, zoom.
  But when they access the files that are a few megabytes ~ 5MB, they have problems with cursor jumping, clicks delayed and problems with zoom in zoom out.
  Kindly throw light upon the question above that we are unable to crack down between implemented VDI and HP thin clients.
  Thank you very much for your answers.

  
  Kind regards
  RGS

  Dear Taj,

  Thank you for your response.
  Customer light HP T520 is the model.
  I'll try this recommending, how ever can you help me solve this problem?

• Help to the PL/SQL Web Application

  Hi guys this is my first post on this forum I'm kind again on Webapplication Pl/SQL and I work on Pl/SQL Web Application.I maintaince have bug in the application such as once, click the package is called sometimes and sometimes I get 404 error.can you help me please on this
  
  Thanks
  Ronak
  
  Published by: Mario on August 13, 2009 12:00

  As the previous user mentioned, in a PL/SQL application, if there is an error in your application, the 404 screen comes up. Therefore, for debugging purposes, you can do a BEGIN block... your specific code where you think that your error spuns of... EXCEPTION WHEN OTHERS THEN HTP.p (SQLERRM); END;

  -This example at least displays the Oracle error message for you, thus giving you a better idea of what may be the error.

• help solve the problem: error code 646 when trying to install updates

  I get an error code every time I try to install 3 updates inportant code is 646

  Here is an article with a fix for updates, get the error code 646 (mainly Office updates):http://support.microsoft.com/kb/2258121.

  If this does not work, try the Windows Update Agent to:http://support.microsoft.com/kb/949104/.

  If that still does not help, please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help, use the control Timer my application does not start

  Hello guys

  I have problems, follow the example signals and Slots, but when my application is running, it does not start.

  If I delete all the code that deals with the Timer control, it's working again, my theory is that the CustomTimer library does not stunts

  Can you help me?

  Thank you very much

  My guess is many people have followed this during the first startup, I certainly did and it worked for me.

  It's probably something simple, missed, without seeing your code it's going to be difficult to diagnose.

  My first advice is always to check the log and see if messages are coming that may be related.

• BSOD-need help solve the problem.

  Hi, my computer just BSOD would for the first time and I have the analysis of the dmp file, can someone tell me the problem and how to solve?

  Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
  Online Crash Dump Analysis Service
  See http://www.osronline.com for more information
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
  Product: WinNt, suite: TerminalServer SingleUserTS Personal
  Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
  Machine Name:
  Kernel base = 0xfffff800`03008000 PsLoadedModuleList = 0xfffff800`0324b890
  Debug session time: Fri Oct  3 19:15:42.940 2014 (UTC - 4:00)
  System Uptime: 2 days 19:08:57.924
  *******************************************************************************
  *                                                                             *
  *                        Bugcheck Analysis                                    *
  *                                                                             *
  *******************************************************************************
  
  NTFS_FILE_SYSTEM (24)
      If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
      parameters are the exception record and context record. Do a .cxr
      on the 3rd parameter and then kb to obtain a more informative stack
      trace.
  Arguments:
  Arg1: 00000000001904fb
  Arg2: fffff8800c77b558
  Arg3: fffff8800c77adb0
  Arg4: fffff8000303d7a1
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  EXCEPTION_RECORD:  fffff8800c77b558 -- (.exr 0xfffff8800c77b558)
  ExceptionAddress: fffff8000303d7a1 (nt!FsRtlUninitializeFileLock+0x0000000000000011)
     ExceptionCode: c0000005 (Access violation)
    ExceptionFlags: 00000000
  NumberParameters: 2
     Parameter[0]: 0000000000000000
     Parameter[1]: 0000000800000018
  Attempt to read from address 0000000800000018
  
  CONTEXT:  fffff8800c77adb0 -- (.cxr 0xfffff8800c77adb0)
  rax=fffff8a0113fed40 rbx=0000000800000000 rcx=0000000800000000
  rdx=fffff8a0113feb70 rsi=0000000000000705 rdi=0000000000000705
  rip=fffff8000303d7a1 rsp=fffff8800c77b790 rbp=0000000000000706
   r8=0000000000000000  r9=0000000000000000 r10=fffff8a0113feb40
  r11=fffff8a0113fec70 r12=0000000000000000 r13=0000000000000000
  r14=0000000000000000 r15=fffff8a0113feed8
  iopl=0         nv up ei ng nz na po nc
  cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
  nt!FsRtlUninitializeFileLock+0x11:
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h] ds:002b:00000008`00000018=????????????????
  Resetting default scope
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
  
  PROCESS_NAME:  System
  
  CURRENT_IRQL:  0
  
  ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_PARAMETER1:  0000000000000000
  
  EXCEPTION_PARAMETER2:  0000000800000018
  
  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b5100
  GetUlongFromAddress: unable to read from fffff800032b51c0
   0000000800000018 Nonpaged pool
  
  FOLLOWUP_IP:
  Ntfs!NtfsDeleteScb+240
  fffff880`012c6a70 e972feffff      jmp     Ntfs!NtfsDeleteScb+0xb7 (fffff880`012c68e7)
  
  FAULTING_IP:
  nt!FsRtlUninitializeFileLock+11
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h]
  
  BUGCHECK_STR:  0x24
  
  LAST_CONTROL_TRANSFER:  from fffff800030c6b7e to fffff8000303d7a1
  
  STACK_TEXT:
  fffff880`0c77b790 fffff800`030c6b7e : fffffa80`6666744e fffffa80`000003ab fffff8a0`113feed8 00000000`00000000 : nt!FsRtlUninitializeFileLock+0x11
  fffff880`0c77b830 fffff880`012c6a70 : fffff880`0c77b8e8 fffff880`0c77b8e8 00000000`00000705 00000000`00000705 : nt!FsRtlFreeFileLock+0xe
  fffff880`0c77b860 fffff880`012cacdb : 00000000`01010000 fffff8a0`113feb70 00000000`00000000 fffffa80`00000028 : Ntfs!NtfsDeleteScb+0x240
  fffff880`0c77b8a0 fffff880`01244343 : fffff8a0`114bcb60 fffff8a0`113fec70 00000000`00000000 fffff880`0c77ba12 : Ntfs!NtfsRemoveScb+0x5b
  fffff880`0c77b8e0 fffff880`012c8a3c : fffff8a0`113feb40 fffff800`03223280 fffff880`0c77ba12 fffffa80`145e1570 : Ntfs!NtfsPrepareFcbForRemoval+0x53
  fffff880`0c77b910 fffff880`0124ba52 : fffffa80`145e1570 fffffa80`145e1570 fffff8a0`113feb40 fffff880`0c77ba00 : Ntfs!NtfsTeardownStructures+0xdc
  fffff880`0c77b990 fffff880`012d82d3 : fffffa80`0fa2f180 fffff800`03223280 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
  fffff880`0c77b9d0 fffff880`0132ad32 : fffffa80`145e1570 fffff8a0`113fec70 fffff8a0`113feb40 fffffa80`0fa2f180 : Ntfs!NtfsCommonClose+0x353
  fffff880`0c77baa0 fffff800`03087261 : 00000000`00000000 fffff800`03374c01 fffffa80`169e8b00 00000000`00000002 : Ntfs!NtfsFspCloseInternal+0x186
  fffff880`0c77bb70 fffff800`0331973a : 00000000`00000000 fffffa80`169e8b50 00000000`00000080 fffffa80`0ca715a0 : nt!ExpWorkerThread+0x111
  fffff880`0c77bc00 fffff800`0306e8e6 : fffff880`02f65180 fffffa80`169e8b50 fffffa80`15f64640 00000000`00000246 : nt!PspSystemThreadStartup+0x5a
  fffff880`0c77bc40 00000000`00000000 : fffff880`0c77c000 fffff880`0c776000 fffff880`0c77b8a0 00000000`00000000 : nt!KxStartSystemThread+0x16
  
  SYMBOL_STACK_INDEX:  2
  
  SYMBOL_NAME:  Ntfs!NtfsDeleteScb+240
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: Ntfs
  
  IMAGE_NAME:  Ntfs.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  52e1be8a
  
  STACK_COMMAND:  .cxr 0xfffff8800c77adb0 ; kb
  
  FAILURE_BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  Followup: MachineOwner
  ---------
  

  Great, keep me updated on the situation of the accident and let me know if it worked.

  Kind regards

  Patrick

• Can a system using Windows XP Professional remotely help another system by using Windows 2000 Professional and control 2000 Professional computer to help solve the problems?

  Windows 2000 Professional has the capabilities of remote assistance?  My sisters husband just passed away and she doesn't know anything about computers.  All their documents, photos, ect..., my brother-in-law kept on the computer.  We live thousands of miles away and I can't fly to him.  Can I remotely access her computer and control it with mine that uses Windows XP Professional?  If the answer is "Yes", if you please tell me how to do it.

  Hello Jeff,.

  -Remote Office application do you use?

  You will be able to connect Windows XP computer to Windows 2000 via the remote desktop connection.

  I suggest you to check the following links for the desktop connection software remotely for Windows XP and Windows 2000.

  Windows XP Remote Desktop Connection software

  Configuration of remote desktop

• At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).

  If I click OK, the program seems to function, but I was wondering if all the features or functions are working properly.   I checked the Microsoft and Windows Update Sites, as well as the Windows Media Center Site and there is no mention of this message or patches.  Is this a problem? Should I just ignore the message?  Is there a fix or update?

  I am running Vista Home Premium on a Fujitsu N6470 with Intel Core 2 Duo T575 clocked at 2.0 GHz and 3 GB of RAM.

  Hello Steve613,

  Thank you for your message.  In order to get this error, you will have to do some registry changes.  Before any modification of the registry, click on the link below to save your registry database.
  http://support.Microsoft.com/default.aspx/KB/322756
  Please follow the steps below to perform appropriate registry changes:
  Click 'Start' > type regedit in the search field and press ENTER.
  If you are prompted, select Yes to user account control
  Click 'Edit' > select 'Search' > type SymAddin in the search field, and then select "next".
  Remove all the entries that are found with SymAddin
  Restart your computer and test.
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Please help solve the problem error: PLS-00306: wrong number or types of a

  Hello
  
  Please see my statement of types and the procedure. Object and the nested table that is declared at the schema level
  
  I'm using the oracle version 11.2
  

  CREATE OR REPLACE TYPE T_COPY_EVNT_DTL IS OBJECT
  
  ( 
  
  eventId varchar2(100),
  
  eventDescription varchar2(100),
  
  promoMonthDescription varchar2(100),
  
  promoStartDate varchar2(100),
  
  promoEndDate varchar2(100),
  
  PROMOCOSTSTARTDATE varchar2(100)
  
  );
  
  
  CREATE OR REPLACE TYPE T_EVENT_TABLE IS TABLE OF T_COPY_EVNT_DTL;
  
  create or replace PROCEDURE Pr_Event_Details_new(ip_xml          CLOB,
                                                                                                                                                   op_sections_xml OUT XMLTYPE) AS
       
       event_list     t_copy_evnt_dtl;
       event_data_sec t_event_table := t_event_table();
       
       
       CURSOR get_event_cur IS
            SELECT cast(collect(t_copy_evnt_dtl(evnt.event,                                                                                                                    evnt.event_desc,
                      mth.promo_month_desc,
                      TO_CHAR(evnt.start_date,
                      'DD/MM/YYYY'),
                      TO_CHAR(evnt.end_date,
                      'DD/MM/YYYY'),
                      TO_CHAR((evnt.start_date - 21),
                      'DD/MM/YYYY'))) as
                      t_event_table)
                 FROM RETEK_PROMO_EVENT_MST evnt
             INNER JOIN  .....
             WHERE ... 
             ORDER BY evnt.event_desc,
                                     mth.promo_month_desc,
                                     dtl.promo_start_date,
                                     dtl.promo_end_date,
                                     dtl.promo_cost_start_date;
  
       type get_event_tab is table of get_event_cur%rowtype index by Binary_Integer;
       l_get_event_tab get_event_tab;
  BEGIN
  
       ....
       
       
            OPEN get_event_cur;
            fetch get_event_cur
                 into event_data_sec;
       
            event_data_sec := set(event_data_sec);
            ...
            
            
            
  EXCEPTION
            --log_errors...                                                                 
            Raise;
  END Pr_Event_Details_new;

  Error: PLS-00306: wrong number or types of arguments in the call to 'SET '.
  Online: 117
  Text: event_data_sec: = set (event_data_sec);
  
  Error: PL/SQL: statement ignored
  Online: 117
  Text: event_data_sec: = set (event_data_sec);

  You will raise a wrong number or types of argument error, or an exception of PLS-00306, if you use the fixed operator with the collection of user-defined object types.

  The collection must contain SQL scalar data types - single values without internal components...

  Numeric values, on which you can perform arithmetic operations.
  Alphanumeric values that represent individual or strings of characters, characters that you can manipulate.
  Logical values, on which you can perform logical operations.
  Dates and times, you can manipulate.
  Time intervals, you can handle.

  Published by: stefan nebesnak on January 24, 2013 13:22

• Try to download indesign but download apps do not appear in the desktop creative cloud application.

  Hello! Help, please.

  I downloaded the creative cloud app and need to download the indesign application, but when I click on the tab "apps" it no app option are included for download. I have also tried and reliable internet connection my mac the re-engining and reinstall the app but still, nothing.  Creative cloud app screen is stuck (see photo below).  Any suggestions? I've dealt with this during more than an hour with no luck.

  

  Hello

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3 - right click on the Finder icon, then select the "Go - To" folder.

  You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  4. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  5 - go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  6 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  7. make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Hope that this will help solve the problem

  Kind regards

  Bani