Best way to select parts complicated image?

Similar Questions

• Inspiron 3647 - what is the best way to gt part of the motherboard?

  What is the best way to discover the part # for the motherboard that came in my computeer?  It is an Inspiron 3647 and it is out of warranty.  The express tag # on it's: [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

  Thanks in advance,

  Betty F., Stonington, CT

  Hi Betty,.

  If please add me as a friend and send me the serial number of your system via private message. I check the motherboard part number and get back to you.

  Kind regards

  Dell - zaanouni HS

• What is the best way to select multiple tracks?

  So, imagine that you have a sequence like this:

  

  And you want to accomplish the following selection:

  

  What is the best way to do that has no shift + selection 12 times? I had FCP where I could click the top left and then shift + click on the lower right and get a selection of range in this way. But obviously it works differently in first. If I wanted to include A5 - 7 in the selection, I could do just a selection rectangle, but someone at - it a convenient way to select several clips landlocked like that?

  The fastest way I can think to do is to temporarily make the slightly shorter left selected top clip so that it has an ATM next to him, then use your mouse to drag and drop around all clips. You must again extend the left top clip again after the fact. Alternatively, you could catch the entire section, then shift select the ones that you don't need. In addition, shift-make drag a marquee selection that includes selected clips deselects them.

  See: work with items in a Premiere Pro sequence

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• Best way to select distinct values, based on another column?

  I have a table with three columns: id (NUMBER), data_dt (DATE) and data_value (NUMBER).
  There is a primary key id and data_dt.
  
  I want to choose the folder with the last data_dt for each unique identification number.
  
  What is the best way to do it?
  I have three different methods, but there may be something that I am missing.
  
  First of all:

  SELECT *
  FROM
  (
    SELECT id, data_dt, data_value,
           FIRST_VALUE(data_dt)
           OVER (PARTITION BY id ORDER BY data_dt DESC) AS last_data_dt
    FROM the_table
  )
  WHERE data_dt = last_data_dt;

  (I use ORDER BY... DESC, instead of just ORDER BY I don't need the clause BETWEEN the LINES)
  
  
  Second:

  SELECT t1.*
  FROM the_table t1
  JOIN
  (
    SELECT id, MAX(data_dt) AS last_data_dt
    FROM the_table
    GROUP BY id
  ) t2 ON (t2.id = t1.id AND t2.data_dt = t1.data_dt);

  Third:

  SELECT t1.*
  FROM the_table t1
  WHERE t1.data_dt =
  (
    SELECT MAX(t2.data_dt)
    FROM the_table t2
    WHERE t2.id = t1.id
  );

  -Don

  As mentioned in hoek, you will need to test all scenarios.

  However, in my opinion the more faster will be those who accesses the table that only ONCE instead of TWICE as some scenarios require.

  HTH!

• Best way to select the image of fine hair?

  I have been using the quick selection tool to select the images that I want to remove it from their origins or change separately. It still works well, except for hair. Even if the hair is smooth, it looks a bit against nature, and when the hair flying around I don't know what to do, except to laboriously outline of things very close-up. Any other suggestions?

  There are several methods available. Here is a tutorial which helped me to get a grip on the masking of the hair.

  http://www.graphic-design.com/Photoshop/remove_backgrounds/index.html

• What is the best way to manage a large image with many tiny objects?

  The photo in question is a mosaic composed of thousands of small shapes in Illustrator. It's about 28 in. x 48 in, but there is a white space around the image. I'm less than a quarter of the way through, and I notice that the AI starts to be slow during the refresh of the screen for example when changing the zoom. The file is 13MB. I fear that the image is too big to have to effectively manage. Would you advise me to break down the image into quarters and put them together at the end, or do you think I will deal with the scale and complexity effectively? If I have to separate section, there's a useful technique to use for this? Thanks in advance.

  You should not cut the image to make your application more efficient.  If it is intended for large format, you can reduce the resolution of the image of what is appropriate for the output device.  If it is a project of offset press, a picture that size is still manageable.  13 MB, I have a feeling that something is causing the slowdown.  You have a disk of assigned preference work?

• After LR3 catalog upgrade which is the best way to upgrade all the images to the new process engine?

  Is there an easier way to upgrade the entire catalog to the new process engine (2010) more than one at a time in the develop module?

  Select the files you want to update in the library grid.  Then go to the Photo menu, choose start develop settings, then choose "update of the current (2010) process.

• Best way to make a film of many DVDs?

  I have a select scenes montage of 20 + raw images using first Elements 7 DVD.  I can not import all of these DVDs in space, what i've got available on my hard drives.  I would appreciate any recommendations for the best way to select scenes extracted these DVD into smaller files of media that I can then import them into a project for final assembly.

  I can imagine an approach to a single scene in a stage line and making it into a type of importable file, but I do not know what type of use that is not reduced the quality of the image along the way.

  Perhaps there is an any other approach miss me, IE using the archives.

  Thank you!

  JGW

  20 + raw images using first Elements 7 DVD

  If you mean that literally, the DVD contain the raw files, you have not DVD-Video and DVD-Data. In this case, all you have to do is put each disk in your drive, use a program cataloguing such as Irfanview, or the operator in PE, to view these files. Programs more cataloging also have a player e-mail, to allow you to view these files. Select the (s) you want and simply copy this / these courses on your HARD drive. Unless you have several DVD players, it will be both.

  Now, if you did not mean 'raw' files and have videos / DVD (disc that will play on a set-top player, or on a computer via a software of DVD, there is a bit more work involved. Your method to import (get the media) in a single project, extract all you want and then do export - this DV - AVI Type II 48 kHz 16-bit files, would be as good as any. You can see this ARTICLE for other options.

  DVD-videos are a great delivery scheme, but it doesn't take long to discover that they are not well suited as support for archiving and storage.

  With the 20 DVDs, you might want to look into an external HARD drive to store media files. You could then do a project in PE, media access for all, then create subclips of just the data you want. You might find these on your drive external HARD, to keep HARD drive your computer as being free of these files as it is possible. I found that editing to FireWire 800 external systems is quite effective, but you must use a map of FW - 800. Try to change to destination / from a USB 2.0, or external FW-400 is slow, very slow.

  Good luck

  Hunt

• Best way to deal with interlaced video

  I'm shooting a "talking head" video for part of a Flash movie, and unfortunately I have only a good quality consumer dv camera, which seems to record everything as interlaced. I also only have final cut express, which also seems to export all as interlaced. I hear that's not optimal for the video that will be streamed on the Web, in other words, if you want sharp.
  
  I wonder if anyone knows the best way to make my sharper image. If I import, manipulate and export it in final cut express greater than necessary, and then scale it down significantly in the Flash 8 video encoder, will be the downward revision to the fact the interlacing less noticeable, similar to the downward revision to one image low fixed resolution may make it sharper?
  
  I heard elsewhere in this forum that the use of any just deinterlace filter makes it worse.
  
  Thank you.

  PS - I certainly would not say that the use of any deinterlacing filter makes
  worse... it depends on the video for one. For a talking head, I think that it
  could work perfectly. For a very quick movement, it may not work too
  good though. You have to try it and see - these filters exist for a reason.

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• What is the best way to edit the pixels of the layer without applying the image?

  Help, please!?

  What is the best way to change the pixels on a new layer (clone, healing, patch or selection) without applying the image? When I do that, I can't change the under layer if I make a mistake.

  Does this make any sense!

  You want to use the patch tool to put the fix on its own layer? Use sample all layers in the Options bar.

• Best way to convert a shadow CMYK, grayscale only in a CMYK image?

  I use Photoshop CS6. I have a CMYK image of fruit on a white background with a shadow that has some cyan, magenta and yellow. The shadow is NOT AN EFFECT. It is part of the original photographed image shot against a white background. I want to turn the shadow in a percentage of black only. I've hidden the fruit so I white background and shadow isolated but now I don't know the best way to make the shadow a percentage of black only. Thanks for any help!

  Mike, who works very well! Thanks for the help you and John!

• What is the best way to detect this text is part of the ContainerControllers without scrolling?

  Hello.

  Question

  What is the best way to detect that the text typed by the user (or added programmatically) exceeds the available space container and find where the truncated part begins? There are others (as described below) highlights the easy way to detect or to prohibit controllers to receive more characters that can be displayed in the area of publication given?

  My attempt partially (Simplified)

  For example, lets say I have a textflow editable with joints two instances of ContainerController.

  
  

  var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
      firstController = new ContainerController(firstSprite, 100, 30),
      lastController = new ContainerController(secondSprite, 600, 30);
  
  
  flow.interactionManager = new EditManager(new UndoManager());
  flow.flowComposer.addController(firstController);
  flow.flowComposer.addController(lastController);
  
  flow.flowComposer.updateAllControllers();
  

  Vertical scroll policy enabled I can compare the height of the composition in the last controller with the height of the content:

  var bounds:Rectangle = lastController.getContentBounds(),
      overflow:Boolean =  lastController.compositionHeight < bounds.height;
  
  trace('Content does not fit into given area?', overflow)
  
  

  But when I change of vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF)-Unfortunately this does not work anymore... (In my case scroll must be disabled, since the text boxes can have only one line with narrow width)

  Use cases

  I want to create the form to fill out. Field can have one or more lines. A field could start in the middle of the page, continue in the following line, where it spreads throughout the page and put an end to the third line - long quarter of the width of the page. Text typed by the user may not exceed given the region since it could cover some static text that is located just after in below field.

  Something like ascii image below:

  --------------------------------------------
  |                <PAGE>                    |
  |                                          |
  |                                          |
  |                                          |
  |               [Field starts here........ |  
  | ........................................ |
  | ........................................ |
  | Ends here..]                             |
  |                                          |
  |                                          |
  | [Another field] xxxx  xxxx xxxxxxxx x xx |
  | xxxxxxxxxxxxxxxxxxx                      |
  |                                          |
  |                              [One more.. |
  | .....]                                   |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  --------------------------------------------
  

  Info:

   [......]  <-- form fields starts with '[' character, and ends with ']'
   xxx       <-- sample, static text
   | and _   <-- page borders
  

  If you want to detect the overflow in the final container, there is another thread discussed before.

  http://forums.Adobe.com/thread/795264

  You can detect it with lastContainerController.absoluteStart + lastContainerController.textLength «»<>