bij printeropdracht foutmelding regel 1791 ongeldig argument according to

Similar Questions

• Passage of arguments about Oracle IRM Office

  Hello
  
  I am new to Oracle IRM and I'm trying to preconfigure Oracle IRM Desktop passing some arguments according to Oracle IRM Desktop Guide, but I don't know where and how put the parameters.
  
  Thanks for your help.
  
  Edgar Galvan.

  Hi Edgar,

  Ah! I see. Ok. I'm sorry. Here is our approach. We assume that for interactive installations, just simply run the exe, and then apply the settings that you need through the user interface. We assume that the additional settings are required for multi-users deployment will go quietly preconfigured with settings appropriate to that end users can just click and go. This can be bundled in a script that may have to do other things, like taking note of the fact that another licnse software has been used, or the end user enter the appropriate server application. For example, in Oracle, we have a central location called MyDesktop which hosts all the software that we are called to use. We just there click the appropriate software and then a specific installer MyDesktop downloads the software to our desktop and installs the software with all the required parameters and the parameters of our environment.

  So, to answer your question directly, if you are an administrator, we would expect you:

  1 extract the MSI to EXE file that you have downloaded from OTN already.
  2 create a script with the command msiexec calling the MSI and the parameters on the command line.

  To extract the MSI file:

  Note: If you are a customer you have connected on My Oracle Support and sought "extracted from MSI. You would have found KM Note 451873.1 which deals with this. In any case, here's what you do:

  * Run the installation executable provided and wait for the Welcome window to appear.
  Open Windows Explorer and go to Windows TEMP%.directory. The location of this folder varies depending on the operating system

  Windows XP: C:\Documents and Settings\\LocalSettings\Temp\
  Windows 7 or Vista: C:\Users\\AppData\Local\Temp\

  .. where is your login username.

  * The subfolder is named Oracle-MRI-Installer-1234567890 where 1234567890 can be any 10-digit number.
  * In the new directory, you will find the MSI installer (this is the file ending in ".msi") and a Setup log
  * Copy the MSI installer in a different directory.
  * On the Welcome window, press Cancel. Confirm that you do not want to continue the installation.
  * Click on finish in the final install window. You can delete the temporary directory that was created because it is not deleted when you quit the process.

  I hope this helps!

  Kind regards
  Frank.

  Published by: Frank Abela on April 21, 2011 09:52

• How to combine features of Thunderbird each access to different sets of multiple e-mail accounts on 2 old computers in a configuration of Thunderbird on my new computer?

  The laptop to access my personal email accounts (4 different ones) and my company email accounts (2 different ones). The old office can access my email accounts personal and emails from my wife (2 accounts for her). I now have a new desktop computer and I would like access to all the accounts of a single Thunderbird. It would be extremely difficult to start a new Thunderbird and enter all account information for all of these multiple accounts of a new beginning and re-upload all emails. I know that I can save the Thunderbird profiles separately and restore them to separate the case of Thunderbird on two distinct users, but it's a pain to change username every time one of us needs to see a different e-mail account. If multiple accounts cannot be restored in an instance of Thunderbird new monkey, is there a way to set up two instances of Thunderbird on a single office and restore backup of a computer in a Thunderbird and the other in the second? Thank you.

  Menu (alt + T) OK, tools > options > Security > passwords > saved passwords and by clicking on the button show the password appears what you forgot.

  I think that the closer you get to what you want is two profiles...

  If you change a shortcut for the following arguments according to the target

  -ProfileManager  -no-remote
  

  Thunderbird will run twice on your computer (so it can be opened in each profile) and ask which profile every time it starts. If you use the argument Pei [profile Name] then Thunderbird will begin with the indicated profile (required several shortcuts).

  My goal of looks like this

  "C:\Program Files (x86)\Daily\thunderbird.exe" -ProfileManager  -no-remote
  

• EditField in Black Berry

  
  

  t can be obtained by using the EditField class with four arguments according to your need.

  EditField ef = new EditField (0, "0", 3, EditField.FILTER_NUMERIC)

  Add that field to a screen or a manager of

  The code above would make the field accepts only integer values. And if it's a virtual keyboard, it would still not show other characters/aplhabets on the keyboard

  OR

• SingletonApp

  Maybe below contain a lot of obvious questions... I went through a lot of reading but I could not yet answer.

  I am trying to create an application that consists of a basic service and a user interface. The background service would be starts automatically when you start. So I used Singleton to develop the application.

  Code is attached and it is very simple. There is no cleanup action in the example below.

  The SingletonAppcontains a static variable that is the SingletonApp itself, and a method "createInstance".

  When the entry point is called, it calls createInstance. If the _instance is null, create a new instance of SingletonApp, otherwise the existing one is reused.

  Issues related to the:

  1: whenever I click the icon, a new instance is always created and a new thread is started. Why the _instance is always null, even if it's a static variable?

  2: I read some examples on the use of RuntimeStore, but it seems that my application does not need to store the application to the RuntimeStore. Below is written without using RuntimeStore intentionally. If I use RuntimeStore, my problem is simply not able to bring the screen interface by calling requestForeground(), I guess I missed something.

  3: there are a few examples that check the args (autostartup, gui) to hand. Where are these passing arguments? Is the device / Simulator would be automatic passes these arguments according to different scenarios?

  public class SingletonApp extends UiApplication {
  
      private static SingletonApp _instance = null;
  
      private SingletonApp() {
          pushScreen(new SingletonScreen());
      }
  
      public static synchronized SingletonApp createInstance() {
  
          if (_instance == null) {
              System.out.println("===== SingletonApp Creating Instance");
              _instance = new SingletonApp();
              _instance.enterEventDispatcher();
          } else {
              _instance.pushScreen(new SingletonScreen());
          }
  
          return _instance;
  
      }
  
      /**
       * @param args
       */
      public static void main(String[] args) {
          // TODO Auto-generated method stub
  
          SingletonApp app = createInstance();
  
      }
  
  }
  

  public class SingletonScreen extends MainScreen implements Runnable {
  
      public SingletonScreen() {
          setTitle("Hello World!");
          Thread t = new Thread(this);
          t.start();
      }
  
      public void run() {
          while (true) {
              int nCount = 0;
              try {
                  System.out.println("===== Thread is running: " + ++nCount);
                  Thread.sleep(5000);
  
              } catch (Exception e) {
                  System.out.println("===== Exception@Run: " + e.getMessage());
              }
          }
      }
  }
  

  'For the approach, as we speak, so must override the close method of the screen so it sends the UiApplication back to bottom?'

  Yes to the last screen displayed

  "Then there's a running application that consists of a service"

  There is not a separate background Application.  This is the same Application.  Foreground and background Applications can have listeners, Threads and so on.  There is no distinction between foreground and background UiApplications.  In fact, the only way you can test one

  . isForeground().

  "So, how know that starting the system or the application icon?

  The application is never started from the icon.  The foreground only the application icon.  It's exactly the same way as if you were in your application, you spent to another task, then when in the home screen and clicked on the icon.

• ODI smart import using sdk

  I'm getting smart import using code below

  New SmartImportServiceImpl impl = SmartImportServiceImpl (odiInstance);

  String xmlfile = ' C: / users/608600862/Desktop/xml/SmartExport"; "

  impl. importFromXml (xmlfile);

  me gives following error

  

  If I import the same exported file using the ODI studio, he is transferred successfully

  I googled a lot but no luck

  Please help me solve this error

  SmartExport works well, but SmartImport above gives me error

  exported file is generate using the smart studio odi export option

  I read somewhere that we must be used SAXParser, but where and how not to get.

  Help, please

  my error solved

  Compile using - javac - classpath \oracledi.sdk\lib\.; \oracledi.sdk\lib\* SmartImport.java

  Run using - java - Djavax.xml.parsers.SAXParserFactory = oracle.xml.jaxp.JXSAXParserFactory - classpath. / ; \oracledi/client/modules/oracle.xdk_11.1.0/xmlparserv2.jar; \oracledi.sdk\lib\.; \oracledi.sdk\lib\*;. SmartImport ojdbc6.jar

  NOTE: do not change any slash('/'or'\') backward or forward, just replace by your odi_home. provide command line arguments according to the requirement of your class.

  Thank you

  Deepali.

• VCenter Unattended Installation - problems INSTALLDIR

  I have been using the published PDF which gives powerful assistance vCenter unattended installs the server: http://www.vmware.com/files/pdf/techpaper/vcenter_server_cmdline_install.pdf

  I have this job for the most part, but a part does not work, and I think I have nailed to the INSTALLDIR switch for the individual MSI files.

  For example, this command does not work (it does appear the msi help window):

  $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "+ $InstallDIR / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log'"

  Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

  However, simply removing the switch INSTALLDIR allows for installation to occur, for example

  ' $arguments = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log.

  Start-Process - FilePath "D:\Installs\vCS\VMware-SSO-Service.msi" - ArgumentList $arguments

  The PDF to think that this option is available.  In addition, I tested the switch in place without spaces and without quotation marks, so it doesn't seem to be a character double-quotes/exhaust problem. I am also using quotes and characters for passwords exhaust etc so do that...

  I've confirmed that this is a problem (for me at least) to:

  SSO

  Web client

  The inventory service

  vCenter Server

  Dump of the ESXi Collector

  Syslog Collector

  Any ideas?

  I try this using vCenter Server 5.5 Update 2 installation on server 2012 R2 using PowerShell (4).

  Thank you

  Tom

  For the moment that it is:

  $InstallDIR = "D:\Program Files\VMware\Infrastructure".

  Note:

  1. I also tried with an escape with double quote character in the variable argument (according to the PDF in my original post):

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite + ' INSTALLDIR =------"' + $InstallDIR + ""-""

  2. I also tried with the escape character (') - same result PowerShell:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

  3. I also tried with a path that has no spaces - this works:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = D:\VMware'

  So, who does not point to a problem with spaces/quotes - but I don't know what I'm doing wrong...

  I've added a line if it looks like this now:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  ' $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = ""' + $InstallDIR + "" '

  $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

  Write-Host "command: Start-Process $exe $myargs - wait."

  Start-process $exe $myargs - wait

  The output from the Write-Host shows this:

  Command: Start-Process D:\INSTALLS\vCS\\Single signe-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "" D:\Program Files\VMware\Infrastructure "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre "

  The escape character is still there - suggesting that I do not understand how to use it!  I just removed the script and it works, so the controls are now:

  $exe = "$VCmedia\Single Sign-On\VMware-SSO - Server.msi".

  $myargs = ' / QR ADMINPASSWORD = "+ $SSOpasswd + 'DEPLOYMODE = FIRSTDOMAIN SSO_SITE =' + $SSOsite +" INSTALLDIR = "" ' + $InstallDIR + ' "'"

  $myargs = $myargs + "" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log ""

  Write-Host "command: Start-Process $exe $myargs - wait."

  Start-process $exe $myargs - wait

  Write-Host now says:

  Command: Panel Start-Process D:\INSTALLS\vCS\\Single-On\VMware-SSO-Server.msi/qr ADMINPASSWORD = Hello! 2 DEPLOYMODE = FIRSTDOMAIN SSO_SITE = VCS - SSO INSTALLDIR = "D:\Program Files\VMware\Infrastructure" / l * v D:\VCS-INSTALL-LOGS\ssoinstall.log-attendre

  Personally, I'm surprised that it works, but it's cool, I'm still learning - I'll try and look a little more information about quotes, spaces and the behavior of the variables when it is passed to a cmdlet.

• Is RAM speed issue?

  Introduction:

  Hello, I ran some tests today to see if RAM speed really makes a difference when it comes to After Effects. In short, my conclusion is that, no, it makes no difference. At least not for the type of project I tested it with. Here are my conclusions, but first of all, my system specs.

  System Specs:

  Intel Core i7 - 3930K (4.3 GHz OC) cooled water

  120 GB Sata II SSD for the OS and programs

  256 GB Sata III SSD for the files of project and after effects of Disk Cache

  16 GB (4x4Go) Corsair Vengeance RAM (hourly stock are 1600 MHz @ 8,8,8,24)

  1 GB Nvidia GTX 460 SE

  Test project:

  The project involved 6 AVCHD videos played simultaneously and a few very basic effects such as corner pinning and cc removal of thread. The after effects memory and multiprocessing settings were as follows. 5 GB reserved for other programs, 2 CPUs reserve for other programs, 2 GB by heart.

  Results:

  1333 MHz, 12, 12, 12, 24 @ 1.57V

  Render time: 03:22

  1333 MHz, 7, 7, 7-24 @ 1.6V

  Render time: 03:17

  1866 MHz 9, 9, 9, 24, @ 1.57V

  Make the timer 03:14

  1866 MHz, 12, 12, 12, 24 @ 1.57V

  Render time: 03:19

  2133, 12, 12, 12, 24 @ 1.6V

  Render time: 03:15

  Conclusion:

  So, in my tests, I found that RAM stpeed is not really play a big role in this situation. However, after thinking about this a bit, I realized that this is probably due to the fact that my RAM must load data from and data dump to my SSD in this project. Even if my SSD is able more 500 MB/s had R/W, it is still not even remotely near speed, were one of these RAM speeds.

  So my question to you all is then as follows, can you recommend a type of project with effects that will mainly use the RAM without having to access my SSD? While my tests show a good example of 'real world' of the effects of the speed of the RAM, they do not show the full picture. With your recommendations, I'll create a new project that will best contribute to the effects of the speed of the RAM and add these conclusions about it.

  Yes... just a little space to fit... you could literally get 8 + of my tricks inside of your and still have room.

  In any case, I did a few tests more and discovered more interesting things on the search for the best speed of RAM.

  Test project

  Just a rubix cube in rotation with 6 iterations of keylight to key of all colors. The AE memory and multiprocessing settings were as follows: 5 GB reserved for other programs, 2 CPUs for other programs, 2 GB by heart. See original post for the specifications of the system. NOTE: I increased the frequency breaks through a little following GHz 4,427 during this test.

  
  

  Results:

  NOTE: Purged of the means I have "purged all" immediately before you click the record button.
  

  24 999 1553 (32.839ns total latency)

  Purged of time 1: 03:37

  Time without purge 1: 03:15

  Time without purge 2: 03:22

  24 999 1864 (27.360ns total latency)

  Purged of time 1: 03:51

  Time without purge 1: 03:03

  Time without purge 2: 03:08

  Time served 2: 03:09

  22 999 1864 (26.287ns total latency)

  Purged of time 1: 03:41

  Time without purge 1: 03:08

  Time without purge 2: 03:07

  Time without purge 3: 02:48

  Time served 2: 03:12

  2174 12 12 12 24 (27.599ns total latency)

  Purged of time 1: 03:45

  Time without purge 1: 03:20

  Time without purge 2: 03:18

  Conclusion:

  These figures all seem to be pretty conclusive that the most important part for After Effects displays must have the total latency as low as possible. So if you're in the market for RAM, get some will give you the lowest total latency, even if it means the passage with the 1600 MHz RAM on the 2400 MHz RAM. The argument according to which the higher latency will consist in transfer rate does not appear to apply here. In fact, it makes sense because a single address in RAM should contain nearly 500 MB for just a difference of 8ns in total latency. (Actual capacity of a single address is probably considerably smaller than that. I sent an email to Corsair to know what the maximum capacity. I'll post here again if they ever come back to me). So in the example above, where cpachris can run either 1600 MHz to 24 777 or to 10,11,10,30 2133 MHz, it would be MUCH better off running at 1600 MHz.

  Other important details:

  Intel says that the speed of RAM they recommend is 1600 MHz (Haswell of 1866 MHz however). I think it's because the hearts intel (at least those I did research) have a clock (bclk) standard base of 100 MHz. everything is based on this bclk. Your CPU frequency is generated by multiplying the bclk by a number. So for 4.4 GHz would multiply you a bclk to 100 MHz by 44. Pretty simple. RAM has now (I think) a multiplier locked which has the value 8. 100 MHz x 8 = 800 MHz, multiplied by 2 for Double data rate (DDR), which means, gives you 1600 MHz. If you try to set your frequency high that WITHOUT changing the bclk then you RAM may very well be running at 1600 MHz, just with worst timings.

  Now, if you were to increase the bclk for 116.625 your RAM frequency would become 116.625 x 8 x 2 = 1866. The tests I ran support this. In the original post, I had my bclk of 100 MHz (RAM max of 1600 MHz frequency). This test showed that, if I went more than 1600 MHz there is no advantage. In the next round of tests, I tested only the values min and max for those who do not give a picture complete. In the last test I boosted my bclk to 116.5 who gave me a RAM of 116.5 x 8 x 2 = 1864 MHz frequency. It is at this frequency that I gave my best results. So, if you use valued at more than 1600 MHz of RAM I encourage you to try to increase your bclk to where it corresponds to the frequency of your RAM and then run tests to see if that makes a difference. I'll go back and try to run the same tests with 1600 MHz to see where that falls to help support or defeat my argument.

  If someone objects to my statements above, please comment and let me know why so we can understand this stuff. All my findings are based only on some readings I've done and what my test results show.

  EDIT:

  I just ran some tests more and got subsequent synchronizations during execution of 1600 MHz at the time 8,8,8,24.

  1st series of tests:

  1600-888-24 (latency total 30ns)

  Duration: 03:14

  2nd series of tests:

  1600-888-24 (latency total 30ns)

  Time:05:34

  The time difference between 1600 and 1866 enforcement was minimal. It was exactly the same time for the first test and the time of 1600 in 4 seconds slower than the calendar of 1866 came. Compare the differences to run the same tests AFTER increase the bclk and this discrepancy increases to 15 + seconds. (by only comparing tests performed to the highest cpu frequency because that plays a very important role in the performance).

• Access of undefined property (dynamic text box)

  Hi guys,.

  I have a clip works as a button that is disabled after click. I need to add a rating option, when click on it also adds to the score. When I add the managed function, it shows the text box is not set. Ideas?

  Here is the code:

  package

  {

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  SerializableAttribute public class DisablingButtons extends MovieClip

  {

  Tags: Array, var;

  var thisParent: *;

  var score: Number = 0;

  var goalScore:Number = 8;

  public void DisablingButtons()

  {

  trace ("it works!");

  labels = this.currentLabels;

  this.addEventListener (MouseEvent.CLICK, managed);

  this.addEventListener (MouseEvent.CLICK, disableButton);

  this.addEventListener (MouseEvent.ROLL_OVER, over);

  this.addEventListener (MouseEvent.ROLL_OUT, out);

  }

  function scoreGame(myEvent:MouseEvent):void

  {

  Note ++;

  score1. Text = String (score);

  If (score is goalScore)

  {

  gotoAndStop (201);

  }

  }

  function disableButton(event:MouseEvent):void

  {

  for (var i: int = 0; i < labels.length; i ++)

  {

  If (labels [i] .name == 'disable')

  {

  this.gotoAndPlay ("disable");

  }

  }

  this.removeEventListener (MouseEvent.CLICK, disableButton);

  this.removeEventListener (MouseEvent.ROLL_OVER, over);

  this.removeEventListener (MouseEvent.ROLL_OUT, out);

  }

  function over(event:MouseEvent):void

  {

  for (var j: int = 0; j < labels.length; j ++)

  {

  If (labels [j] .name is "over")

  {

  this.gotoAndPlay ("over");

  }

  }

  }

  function out(event:MouseEvent):void

  {

  for (var k: int = 0; k < labels.length; k ++)

  {

  If (labels [k] .name is 'out')

  {

  this.gotoAndPlay ("out");

  }

  }

  }

  }

  }

  When you instantiate the class in your fla, you must pass the TextField class...

  Import DisablingButtons;

  var btn:DisablingButtons = new DisablingButtons (score1);

  addChild (btn);

  And in your class file, you need to adjust it to accept the textfield object such as what I show below.  Just realized that I manipulated the baptism to preserve your name score1 at both ends of your code by naming the argument according to which the class differently (txt).  Otherwise I would have normally used a name of variable within the class as score1 differewnt

  package
  {
  import flash.text.TextField;
  import flash.display.MovieClip;
  import flash.events.MouseEvent;

  SerializableAttribute public class DisablingButtons extends MovieClip
  {
  Tags: Array, var;
  var thisParent: *;
  var score: Number = 0;
  var goalScore:Number = 8;
  var score1:TextField;

  public void DisablingButtons(txt:TextField)
  {
  trace ("it works!");
  score1 = txt;
  labels = this.currentLabels;
  this.addEventListener (MouseEvent.CLICK, managed);
  this.addEventListener (MouseEvent.CLICK, disableButton);
  this.addEventListener (MouseEvent.ROLL_OVER, over);
  this.addEventListener (MouseEvent.ROLL_OUT, out);
  }

  etc...

• Bij het updaten van KB950974 komt 0 x 80070008 foutmelding hoe you hertstellen?

  Update automatic van het bij programma KB950974 squeeze foutmelding ik 0 x 80070008.
  Said zou Hotel komen door you weinig schuifruimte maar deze is ruim Roken.
  Foutmelding is voor het first Café nagaoui er een algeheel system had place d op 5 December j.l..
  Het programma is gedownload maar kan niet geinstalleerd worden.
  Intussen al 10 x to receive advertising.
  Bij het think van het programma Microsoft Fix It squeeze melding geen problems found major questions die ik.
  Weet iemand een Holland?

  Sorry, maar deze forums bieden support alleen in het Engels. Kies uw land yesterday: http://support.microsoft.com/common/international.aspx> en klik op voor support in uw taal pijl.

  Forum - Deutsch: http://answers.microsoft.com/de-de/windows/forum?page=1&tab=all>

  http://support.Microsoft.com/kb/836941/de

  UTC/GMT is 19:07 Sunday, December 11, 2011

• Download Photoshop cc van eerste bij (2015) squeeze ik next foutmelding: gedownloade bestanden niet uitpakken Kan. Opnieuw om nogmaals you downloaden (U44M1I210). IK heb said al some malen uitgevoerd doch ik het foutbericht o squeeze telkens opnieuw

  Download Photoshop cc van eerste bij (2015) squeeze ik next foutmelding: gedownloade bestanden niet uitpakken Kan. Opnieuw om nogmaals you downloaden (U44M1I210). IK heb said al some malen uitgevoerd doch ik het foutbericht opnieuw squeeze telkens opnieuw. Kan iemand me like hoe ik said oplos?

  Please visit: Download Photoshop cc van eerste bij (2015) squeeze ik next foutmelding: gedownloade bestanden niet uitpakken Kan. Opnieuw om nogmaals you downloaden (U44M1I210). IK heb said al some malen uitgevoerd doch ik het foutbericht o squeeze telkens opnieuw

  (Double Post)

• foutmelding bij stuurprogramma "microsoft Teredo Tunneling adapter" kan geen DVD meer branden

  IK steeds een foutmelding squeeze: stuurprogramma Microsoft Teredo Tunneling adapter niet code 10 Land works. ER wordt me said dat said een probleemoplossing nice community op om you werken PC service. Verder maak ik al veel jaren DVD-tjes via Pinnacle 14 ultimate naked en said blokkeert programma en kan ik niets meer dreams although of brander-atapi-fix works. Wat kan ik doen?

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you!

• Foutmelding bij openen Voorkeuren

  Hallo,

  IK zit puts een question dringende, misschien dat iemand mij kan helpen.

  IK heb voorinstellingen time in wil deze like importeren. Said is voor het grootste gedeelte gelukt echter laatste paar zijn 'Local predefined adjustment', like geimporteerd via Bewerken worden deze > Voorkeuren, kopje als ik het openen geeft een foutmelding aan hij het devising Voert en Lightroom Voorkeuren programma af. Idea of enig iemand has hoe ik said clean kan oplossen?

  Groeten Iris

  Follow the steps below: -.

  • With Lightroom close access

  C:\Users\YourUserName\AppData\Roaming\Adobe\Lightroom\Preferences    (Where AppData is a system folder / hidden so you may need to enter the name of the folder directly into your browser's address bar or activate hidden folders / system in the Internet Explorer view folder options.)

  • Open the file LightroomPreferences.agprefs
  • Locate the line use = True autobahn (press CTRL + F)
  • Take Autobahn use = False

  
  

  • After save the file
  • Restart Lightroom

  ~ Assani

• Het expensive, wpd beveiligde-opslagwachtwoord, foutmelding bij opstart

  Microsoft, doing WPD beveiligde-opslagwachtwoord, geeft een melding puts opstarten.

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now ask your question again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• Resident of bij het bad pc spel squeeze telkens foutmelding erro6 ondersteunt pixelshader DirectX9 als ik hem Probeert you starten _ Wat kan ik doen? Bij voorbaat dank. __

  Ideas:

  • Programma
  • u lapses problems encountered
  • Foutberichten
  • Recent p die u aan uw computer
  • Wat I al geprobeerd om het op clean would you lossen

    Don't forget not - says is een openbaar due forum private information such as E-mail bericht van telefoonnummers nooit!

  Hi ampie68,

  Welcome to the Microsoft Windows answers Forum community!
   
  Unfortunately, the Windows Vista community is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
  http://support.Microsoft.com/common/international.aspx

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.