Bike logo appeared all to itself.

Similar Questions

• Once I turn on my dell inspiron laptop 1545 dell logo appears and then the screen goes black

  Let me start by saying: I had similar problems before, but none of the usual works.  The other day, these two Windows Update kept popping up and wouldn't go away so I clicked finally allow.  Then the next day that I was on the internet and my computer froze, I tried to turn it off and it wouldn't if I pressed the power button until it did.  Then when I turned it back after the dell logo appeared all that I had a black screen with a cursor in the upper left.  I ran diagnostics and startup repair and nothing.  I tried to do the restore of the system once in couple with different points and nothing, I still get the black screen after dell logo.  Is there another way outside the reinstallation of the operating system, to fix (because I really don't want to lose everything I have on my computer - and no I don't save it anywhere)?

  You can reinstall the OS without formatting the drive, all of your data in a folder named windows.old. You will need the Dell Windows Vista disc however.

  Follow my guide here: http://en.community.dell.com/support-forums/software-os/w/microsoft_os/1434.aspx
  Start with step 3. (require reinstalling Dell DVD). Skip step 5 continue on step 6 to step 7. Install Service Pack 1 and Service Pack 2 (autonomous probably 32-bit) and stand-alone Internet Explorer 9. You must download these in step 4 with the system drivers as described (probably, use another computer and use a USB drive). Install the drivers as mentioned system. Activation should be useless since you use the Dell DVD in a BIOs Dell. At the stage. 12 use the automated to retrieve documents from Windows.old. Make sure you have everything and then delete windows.old.

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Acer logo appears 2 times then starts windows.

  Hi entire community of Acer.
  I recently bought an Acer S670MG or computer M679G of office with the following specifications.
  Processor Intel core 2 due 3.1 ghz. 6 MB of L2 cache.
  6 GB of ram ddr3 to bus 1066 mhz
  NVIDIA Geforce 9800GT 512 MB/256bits external graphics card.
  WD 1 TB SATA hard drive.
  and I faced a problem that when I turned ON computer it beeps Acer Empowering People appears a few seconds then display has disappeared. then after cutting seconds, once again beeps sounds and new Acer logo appears, and then starts windows. can someone help me why this happens. because of this, boot time is much longer.
  P. in the bios. I tried both modes of hard drive. RAID and native ide. in third place is AHCI, I think that I have not yet tried.
  Help, please.
  BIOS. energy or American mega trend.
  Windows 7 Ultimate 64 bit SP1.

  A link to all of the troubleshooting you have already done here:

  http://www.SevenForums.com/hardware-devices/293189-Acer-logo-appears-2-times-then-starts-Windows.htm...

  Problem seems to be resolved by applying this thread.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Radio buttons determine what company logo appears

  In the ss9, I created a form using the generator feature of the Action where the first line is two radio buttons for the user to choose which of our two companies they work for. According to their choice, corresponding company logo went from invisible to visible on the Master Page. It works fine, but when a second page is generated dynamically, the logo appears on page one. How to display on all subsequent pages generated?

  Hi Don,

  Error in basic on my part I like to use the docReady event because it fires only once, as the form is returned on departure. However, that's the problem here. When a new page is rendered, the docReady event does not fire, so the new instance of the ImageField is open.

  Simple solution is to move the docReady event script to the initialize event of the ImageField. I modified the sample, same link (http://assure.ly/sUcrHx).

  Niall

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

  I have a problem simular with a P200-140.

  When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

  I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

  I don't know if it's maybe a switch problem?
  Y at - it a contact microphone that could stick when you close the lid?

  I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

  Hi Mortiss,
  Maybe the backlight of the lcd screen went... (I don't think)
  or broken wires... (!)
  or the lid switch is defectiv (rare)

  ask a servicepartner to help...

  deassemble unity... or watch this will kill your warranty...

• I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I did a reboot, nothing has changed.

  so the music app is an application by default/standard, it cannot be removed or reloaded.

• HP laptop 15: Start Hp logo appears

  Hello

  I try to recover my hp laptop on windows 10 and the recovery process was stop at 45% after this window is not the charge. When I turn on computer logo as hp laptop and load those then the screen has notthing. After that I reinstall new windoas 10 to my laptop, but now the start hp logo appears. Is it possible to recover windows startup logo

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I see that you have had problems with HP recovery and finally you have your own version of Windows installed. Please, correct me if I'm wrong. If that's the case, then, you can't have the HP logo - it appears because it is part of the image of HP.

  If it is very important to you, you must use HP recovery media to restore the computer as long as factory default. Please, let me know and I can provide you with additional steps.

• When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

  If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

• Character marking does not appear all the time in the outline Panel. How is it?

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Salvation of Jazz,

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Sorry for this negative experience. It is a known problem. Add your voice to the bug here: http://adobe.ly/ReportBug

  Thank you

  Kevin

• I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  How to update or download all the fonts in my Adobe Adobe Acrobat X Pro?

  Get the police does not always help, but to use a font you don't add it to Acrobat. Add you on Mac or Windows.

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• Firefox logo appears in a white box, rather than using the background as 3.6

  I just installed Firefox 4.0.on my laptop xp sp3. My desktop, quick launch and Firefox startmenu icons are all on white background. Change page it says that the Firefox logo has been updated, but I couldn't find a description of the software update. How can I change the Firefox logo at bottom transparent?
  When I search the area user how do research so that the two words are in the results?

  Yes the new logo shows a white box on the old 16-bit color screens, there is a bug that is being developed, for now try to change the 32-bit color, if possible.

  https://bugzilla.mozilla.org/show_bug.cgi?id=906871 - white square appears around the new Firefox 23 icon in Windows XP by using the 16-bit color mode