Binary is not found or not a file: arm\o.le-v7-g\Point

Similar Questions

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site Recovery Manager.

  Hi all

  Can we add several table managers at sites in VMware SRM?

  How to record several managers of the group a table copy in SRA?

  "When I try to add new array manager of second table at one site I get the error message" SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site recovery manager.

  Versions: VMware SRM 5.5

  Cruiser storage: Fujitsu Eternus SF v16.1, SRA 2.3

  Thanks in advance,

  RAMU Reddy

  [email protected]

  Thanks Stefan,

  I contacted my storage team. It was with License Manager (ACM) advanced copy number. After license ACM registry in SRA Database of SRM server, everything was fine and I was able to protect all remaining VM.

  Best regards

  RAMU Reddy

• Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Hi Rose

  Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  I hope this helps.

  Thank you

  Varun

• 2100 message not found; No product message file = RDBMS, installation = UL

  Hello
  
  I'm running sqlldr. But I got this message:
  
  2100 message not found; No product message file = RDBMS, installation = UL;
  
  I checked my ORACLE_HOME and its value is: C:\oraclexe\app\oracle\product\10.2.0\server which includes records BIN, RDBMS,...
  
  I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS. MSG inside the folder. If this is the solution where I can find this file? I read in the forums in order to copy it into the directory of the server to the client, but I couldn't find anywhere on my machine.
  
  Thank you
  M

  You should look for ORAUS. MSB and not ORAUS. MSG: this file must be located in C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\mesg\oraus.msb

• Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108

  I have an app VS c# that references the assembly OR world.  It worked fine in 32-bit Windows XP environment.  However, when I installed and ran the application in the Windows 7 64-bit environment.  The app was the following text:

  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
  "File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"

  Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform?  It's the same application binary.

  Thanks for your help!

  Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.

• How can I fix error with package installed: "could not load file or assembly ' NationalInstruments.Daqmx.dll

  I'm fighting this problem for days (euphemism)...

  I used to work, but now isn't an installation package.  I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI.  I put everything ' x 86.

  The list of dependencies in VS2010 is illustrated in the attatched screenshot.

  The text of the mistake of trying to run the application on the target computer is lower in italics.

   

  Of course, I could use some help on this!  Thanks in advance.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
  File name: "NationalInstruments.DAQmx.dll."
  at IPClientTest.MTF_Supervisor.mainSstart13)
  at IPClientTest.MTF_Supervisor.mainStartByParts)
  at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Label.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  MTF_Supervisor
  Assembly version: 1.0.3.3
  Win32 version: 1.0.3.03
  Code: file:///C:/mtfDebug/MTF_Supervisor.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  MTF_ClassLib
  Assembly version: 1.0.1.0
  Win32 version: 1.0.1.0
  Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
  ----------------------------------------
  NationalInstruments.UI.WindowsForms
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
  ----------------------------------------
  NationalInstruments.UI
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
  ----------------------------------------
  NationalInstruments.Common
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  NationalInstruments.Common.Native
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.Design
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
  ----------------------------------------
  Accessibility
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  Salvation Lorne.V.,.

  Exactly how you install OR DAQmx on the target computers?  Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.

  You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines?  And you have the same version of DAQmx on both machines?

  Kind regards

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Windows Update will not download files January 2016

  I am running Windows 7 and I am trying to download all updates from January 12, 2016.  The download does not start, sitting at 0% for more than half an hour. No error code is displayed. A laptop computer that I also use properly updated this morning. There is no problem with my internet connection.

  Windows Update displays: 23 updates, (Total of 0 KB, 0% complete).

  I restarted the computer (the button turn off had a yellow shield, indicating the necessary to install updates, closing took a lot of time to finish), when the finished computer restart I ran an app such FixIt recommended by using Microsoft Windows Update. Now, Windows Update is hung on the status of "check for Updates". Cancelled that and found another utility here:

  https://support.microsoft.com/en-us/gp/windows-update-issues?wa=wsignin1.0. As utility works for nearly 15 minutes, stuck on "Solve problems" will wait a little longer before canceling this utility.

  David

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• U - SQL error: could not load file or assembly 'ScopeEngineManaged.dll '.

  Hello

  I downloaded 'Azure Data Lake Tools for Visual Studio' for Visual Studio 2013 and installed.

  I created a sql - u script and try to run on the local computer. I am getting error below.

  "1 E_CSC_SYSTEM_INTERNAL error: internal error! Could not load file or assembly 'ScopeEngineManaged.dll' or one of its dependencies. The specified module could not be found. 1 1 USQLApplication1 Samples\USQLApplication1\USQLApplication1\M12PostCodes.usql D:\Nagaraju\Hitachi\Datalake.

  Please help me solve this problem.

  Note: If this isn't the correct category, please route to the appropriate queue.

  Concerning

  NK

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows 7 backup and restore recording is not recent files (and task corrupted images)

  I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it.  The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so.  For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.

  Any questions/comments that might relate to the question above:

  -J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
  -Last week, I realized that my automatic backup didn't work automatically.  I found the problem is due to a corrupt image of task in Task Scheduler I could fix.  I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.

  -J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with."  Any help

  Help for backup and the Task Scheduler issues would be greatly appreciated.  Thank you!!

  André

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to corruption on the system files, please follow the methods below.

  Step 1: I suggest you to re-create the Task Scheduler.

  Steps to re-create the Task Scheduler

  1. Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
  2. Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
  3. Save the changes and then close the registry editor.

  Now check if the Task Scheduler works.

  Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Step 2: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• Windows 7 search is not locate files and content that I know exist. Why?

  Sometimes, I just need to find a directory to search for a file containing a specific string. I don't care if it's a text document or a word document or email. I need to search for all the file types, and I need reliable and reproducible results. He didn't necessarily need to be fast. How do I do that?

  I don't know how to say just Windows 7 Search to search for content regardless of the type of file, or to search the contents of files without extension.  (I did the test files that were just txt, then renamed them without the extension, and search for Windows 7 could not search the content.)  I would like to know that too, as I do my own notes on works of research since I found that the help file has been very rare, so I'm curious to read someone of other ideas.   In any case, it might be safer in terms of certainty looking for a DOS command prompt: http://www.computerhope.com/findstr.htm

  More technical stuff that might or might not be useful for Windows 7 Search:

  http://msdn.Microsoft.com/en-us/library/aa965711

  http://msdn.Microsoft.com/en-us/library/bb266512

  http://msdn.Microsoft.com/en-us/library/ff521735

  Otherwise, I found several links in other threads on the shortcomings of Windows Search to search for freeware software:

  http://www.easexp.com/XSearch/ (allows searching by attribute)

  [updated may 2013]

  Mythicsoft.com/agentransack, locate32.cogit.net, jam - software.com / ultrasearch, tools.tortoisesvn.net/grepWin.html, voidtools.com, mcrenox.com.ar/filefinder, fsl.sytes.net/ssearchxt.html

  Another program that is useful is FreeCommander, which can be used for a wide variety of tasks in addition to the research and can be used as an alternative to Windows Explorer: http://www.freecommander.com/.

• Your binary is not optimized for the iPhone 5, Application Loader, ERROR

  I use flash builder 4.6, Air 18,0 on windows 7.

  I receive the error.

  Your binary is not optimized for the iPhone 5 - New iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and must include a launch image with the size-568 h modifier immediately following the < basename > the filename part of the launch image. The launch images must be PNG files and located at the top level of your package or provided in each .lproj folder if you locate your images of launch. Learn more about the iPhone support 5 and the app launch the images by reviewing the ' iOS Human Interface Guidelines' to 'https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/ IconsImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide' to 'https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-W12 S'.

  
  

  I packed all type of style, one by a [email protected] Default.png, Default-568h@2x~iPhone.png etc, but eror won't.

  How to remove the error. I packed images and pictures on splashimage... one by one page by default.

  Now I am confuse to be it's mistake or apple Air or my error of flash builder.

  Please can you sat down.

  regarding.

  Naser.
  

  [email protected] is the size of the requested file, and it must have dimensions of 640 x 1136.

  Make sure that this file is included in your IPA in the top-level directory.  A good way to check is to rename "myapp.ipa" to "myapp.zip" and unzip and look in the top level of the folder structure.

  To get Flash Builder to include it in the IPA, place it in a folder that is included in your flash builder source tree (I use the "system" folder and make sure it is added separately to the project) and make sure that you have checked in the content area of the package:

  

  Additionally, make sure that you have "copy the files not included in the output folder", checked on this screen:

  

  Hope that helps!