bind data to labview with excel spreadsheets

Similar Questions

• Dashboard of data for LabVIEW with ad-hoc wifi?

  Hello

  We have a laptop and we run a LabView control and acquisition of data on this subject program. We would like to have access to some of the values of the "indicators through an android tablet, so during an operation manual tap on our facilities, we could see remotely what happens with some measured values in our application LabView.

  The ethernet port is not available on this laptop, it is used for a sensor. It has wifi and bluetooth adapter. What would be the easiest solution to access the LabView app on this laptop from the Android device by using the "dashboard of data for LabView" android app? For security reasons, this laptop can't access internet, but of course, we could all just put a near wireless router (and not connect to the internet), and the laptop computer and the android Tablet access the same wifi network. I guess it should work, Yes?

  Or is it possible to make a connection to wifi ad-hoc between the laptop and the Tablet and use the DataDashboard? Anyone has any experience with such a solution?

  Last question: or what a Bluetooth connection? Might work?

  Thanks a lot for the tips!

  Kind regards

  Hi man,

  I recommend you connect your tablet as you described.
  _________

  |                   | ---> Network---> sensor cable

  | DAQ App |

  | Windows | ---> WiFi---> gateway---> Tablet

  |                   |

  ---------------

  I don't think that it is possible to use the Bluetooth with the application of the dashboard of data for Android. I can't find any information on Bluetooth, only for the WiFi.

  Best regards, Stephan

• How to write data in an Excel spreadsheet protected (with unlocked cells)?

  Hello!

  I have LabVIEW 8.2 and I often use the report Generation Toolkit for Microsoft Office' to save data in Excel spreadsheets. So far, I only used the leaves unprotected.

  But right now, I have an Excel worksheet protected by some cells unlocked. If I open the file using Excel I can fill these unlocked cells without any problem. However, I am not being able to fill these cells unlocked using LabVIEW and the Toolbox. I have a few questions:

  (1) is it possible to use LabVIEW to write data in a protected Excel worksheet, even though she has unlocked the cells?

  (2) if it is possible, how can I do that?

  OBS: I noticed that if I unprotect the sheet, I can write data to the file. But I don't want to be protected and the protection of the sheet, since users will not have the password.

  I hope that I was clear. I really appreciate any help you can provide.

  Thanks for the replies.

  Use ActiveX I could write the cells individually. By doing this, I could write in the unprotected cells without any problem. hour

  Probably, the Toolbox has been activated somehow the overall protection of the spreadsheet and Excel was not allowing writing.

  I had never used before ActiveX, so I had to learn it from scratch. I was looking for some tutorials on the internet but I have not found much information easy. What struck me the most help is an example that comes with LabVIEW named "Excel - write Table.vi. After some tests, I was able to open my data protected from the worksheet and fill in the unlocked cells.

  Thank you guys!

• import excel data to labVIEW, filtering and exporting to Excel

  LabVIEW dear specialists,

  I have about 2500 data each for acceleration and force stored in two excel columns of the worksheet as well as time data in another column. My problem is to purify my data of noise so I could generate thin sinusoidal signals for my thesis. I'm still new to labVIEW and I would like to ask for help to import my data from labVIEW, filter and exporting to Excel. Please help me. I enclose my data below. Thank you very much.

  froebaruch

  Hello!

  These could be good starting points:

  http://www.NI.com/analysis/Excel.htm

  https://decibel.NI.com/content/docs/doc-8226

  A few examples delivered with Labview, too.

  Kind regards

  Marco

• Client server of executable activex LabVIEW project with excel vba

  Hi all

  I submitted a ticket to support nor on this problem, but my deadline for this project is very close, so I would like to ask the community to see if someone has encountered this problem before (I hope it's ok that I'm doing this!). I did a fair amount of forum-scouring, and I didn't know this even discussed problem.

  I built a labView project which is essentially in the material data and
  preforms various visualizations and transformations on the data. A bit of the
  Screws in this project are available by VBA Excel as a Server ActiveX with LabView and
  Excel as the customer - and it works! I recently discovered I would need to do a
  executable version of my project, so I'm now trying to figure out how to do the same thing
  with my executable file as the server instead of LabView. Here's a simplified version are
  My VBA code:

  Void Button1_Click()
  Dim lvapp As MyServer.Application
  Dim vi MyServer.VirtualInstrument

  Set lvapp = CreateObject ("MyServer.Application")
      
  VI the value is lvapp. GetVIReference ("Main.vi", "", True)
      
  Sheet1.cells (1, 1) = vi. GetControlValue ("Path")
      
  lvapp. Quit smoking
  End Sub

  I replaced LabView here with the name of my server. The code
  failure of the CreateObject method with the following error:

  Run-time error '13':
  Type mismatch

  Things, I'm pretty sure I'm doing it correctly:
  -L'application is configured as an ActiveX server in the build options
  -J' ran the VI once and close/re-open it just after each build before trying the
  worksheet
  -In excel, VBA method is configured to reference the type library of the server.
  -J' have LabView itself closed when I run the .exe

  Thank you

  Alex

  My versions and such:
  Software of NEITHER: LabVIEW version 2012
  OS: Windows 7

  It's interesting - I'll have to look into the issue. In the meantime, I found a solution.

  It's quite mysterious, but it seems that all I had to do was make sure you only the type library of the server executable has been referenced in VBA (no LabView or OLE type library) and declare the variable app as object, rather than MyServerName.Application. Honestly, I have no idea why this works, but it does. Also, I learned that you need to use the executable file paths, which are a little different than the paths of project files.

  Thank you

  Alex

• I cannot enter data in any of my spreadsheets Excel or Word online.

  Initially I had MicroSoft Excel and Word 2010 Starter Version came with my PC.  Later, I tried MicroSoft Home edition trial.  The trial period has expired, and I can't enter data into one of my documents Word or Excel spreadsheets.  So, in desperation I chose to buy the Home and Business 2010 package, but when I try to order it, and press continue to purchase my browser indicates that this page is not available.  Now I'm stuck with no working version of office and no way to upgrade.  How can I return the version began Office 2010?

  Thank you
  John

  You are using the trial of Office and not Office Starter versions, programs & features uninstall MS Office, reboot, and then repair Office Starter

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c02981221#N272

• How can I generate a data merge that includes a barcode in excel spreadsheet for InDesign?

  Can you please indicate whether the following process is possible in InDesign CS 5.5? (Mac OS 10.8.2).

  We need to create a data merge that includes a barcode. The fusion of data concerns several thousand records.

  We have a customer supplied Excel spreadsheet that contains seven fields, which is a number which ultimately must print a barcode when we do the data to merge in InDesign.

  As you expected, the classic six data fields merge perfectly - but we can't find a way to make the code barcode printed properly within the data merge.

  We looked at several possible solutions without success.

  Some of the solutions suggest a plug-in for Excel convert the number to a code bar while still in the spreadsheet - but this does not come across properly when import us the CSV file in the InDesign data merge.

  We studied some third party software applications, but neither gives the complete solution that we need. Some, for example, seem to create the bar code in the Excel worksheet but do not produce the barcode correctly when us data merge in InDesign; and some we will create a unique bar code in InDesign, but have no automated way to recover thousands of numbers in Excel and turn them into bar codes.

  We have you met also possible solutions "police" but have had no success with these either.

  Previous employment, only to produce us entrusted to a specialist mailing company, who assured us that they have produced all the work (very quickly) in InDesign. They, understandably, don't tell us how they did it. But, given the speed with which they have produced work for us, we imagine - with the correct software - the whole process is easy to do.

  Can you please specify?

  See second adhow to generate a data merge in InDesign from an excel worksheet that contains a bar code

• Is it possible to create a form that allows users to import data from an excel spreadsheet

  I was not able to start my reading on writing scripts or other features of livecycle to try to understand this, but I was wondering if anyone else had already created a form with this feature or had any ideas on how it would be possible.  Currently, our company uses and Excel form that have a variable number of rows of data for each time it is filled and we it would be replaced with a form of adobe.  I would like to know if users who will use the new form in adobe reader adobe, might have the ability to imort lines of the previous form of excel in the new version of adobe.

  Hello

  You can configure a data connection with an Excel spreadsheet. However, for the data connection caring for users of Reader, you need to activate Reader with LiveCycle Reader Extensions ES2.5 (server component) form. See here for the summary: http://assure.ly/etkFNU.

  However, if you just try to get existing data into shape, you should have a look at some of the posts by Stefan Cameron: http://forms.stefcameron.com/ (try a search). You can start a new form by using the wizzard and select import into Excel. This will allow you to paste your spreadsheet to a new form. This should help to put in place the structure/data schema, which you can then reproduce in a new form. I've not done this before, but it should be possible.

  Hope that helps,

  Niall

• How to display '-1' with a table not formatted (Excel spreadsheet) in InDesign

  Hello!

  If you place a table not formatted (Excel spreadsheet) in the cells of InDesign with '-1' are not displayed :-(

  The Adobe solution is to use the tables formatted, but that is no option for us, because if the numbers in the excel worksheet updated, InDesign loses real formatting and rebuilt the Excel formatting :/

  The problem is understandable for Adobe, but we didn't have the suspicion to ask in the forum for a solution.

  I think the problem is the operating system and independent version of InDesign - we everywhere (Windows 7,8,10) and Mac OS X, CS6 CC problem - there is a bug/feature in constand.

  Does anyone have a solution or a solution to our problem? :-)

  Thank you in advance!

  Ludwig

  In Excel, you must precede the - 1 with an apostrophe (so '-1). As you probably know, this is unnecessary with other negative numbers... If I remember correctly.

  It is not sufficient for formatting just these cells as text in Excel, the apostrophe is necessary.

  Mike

• Can make a Web site built with interface muse adobe with a database as an Excel spreadsheet?

  Is it possible for a website built in Adobe Muse to interface with a database?  I need to turn a little robust excel spreadsheet in a site easy to use as links to a database that can be updated easily and regularly.  Thank you.

  Hello

  Muse is a design software. You can design websites in Muse and host on any server of your choice. It has no native function in Muse to convert a spreadsheet into a Web site. If you are good with coding, you can develop outside the Muse and call it in Muse site using iframes, if at all, it is useful to you.

  Kind regards

  Aish

• How to put a border of data imported from Excel spreadsheets?

  Looking to define a border for cells of data within the Dream Weaver CS5, all data is imported from Excel.

  Once the data is imported in HTML format, you can change the border color of the table of data via CSS as you would any other table.

  CSS style tables

• LabVIEW in excel file

  Hello... I am using labview 8.5 for my last project year... can I convert the graph in the labview in excel file using this version of labview? Please... help me... ahaksss

  Search the forums and you will find hundreds of examples (or even thousands) of how to get the LabVIEW data in Excel.  From there, you can create your chart in Excel.  Very likely, you will want to use ActiveX functions in LabVIEW to communicate directly with an Excel spreadsheet.

• Excel spreadsheet Voodoo

  Hi all

  For a job/hrs. paid should I fill out my information in an excel spreadsheet.

  As soon as I get a number of hours worked in say D2 a triangle of red error appears where there is a formula that is not happy.

  The error says "Argument 1 of the TOUR expects a number, but the cell contains a date." Even if the cell in question has requested an hour in 15:00 format I entered. ???

  The second thing is that the spreadsheet I use was sent to me by a PC person who says I use an older version of the form and that is the problem. However, I use the updated version, she sends me every time, by clicking on it with the mail to open in number. For some reason, either at the end or mine numbers back to the original version of the document when you open or save after I have sent him filled form. Or some other Voodoo that happens.

  Is there something I need to do on my end when export to ensure that it exports to the version that I just opened? Figures has a bad memory or something?

  Thanks for any idea,

  Al

  It would be useful that you could provide details, perhaps even the real formula! "

  Excel and numbers to deal with date and time values differently. Each method has its own advantages.  The differences may be causing your problem.

  If you work frequently with users of Excel, you can consider using Excel for Mac.  Although numbers can import/export from/to Excel it is not designed to be an Excel "clone".

  Meanwhile, according to the formula that gives your problem and maybe there is a quick fix that works in your case.

  SG

• reading data in labview to accdb file

  Hello.

  All I want to do is to read the data into a file (MS Access 2007 and later) .accdb and be able to use these data in labview. It's just a table with a group of numbers. I know how with excel but I'm getting confused with MS acess. I'm trying to play with LabSQL right now but still get confused.

  Help, please!

  Thank you.

  What are you specifically confused about? Before using LabSQL, I suggest that you find a good tutorial on the SQL language. Database Toolbox of OR can also be used. It hides some of the complexity of the SQL for beginners.

• LabVIEW to Excel - decimal problem

  I use a VI to copy an array of LabVIEW in Excel

  http://forums.ni.com/ni/attachments/ni/170/125802/1/Write_Table_and_Chart_to_XL.llb
  

  My system uses the comma as decimal separator standard. Despite the change in the settings of LabVIEW, the table that I generate using a decimal point. When I copy data values smaller that one are copied correctly, but the values > 1 are recognized as being the value times a million.

  is still 0.9 0.9 but 1.34 1340000

  Is it possible to fix this

  Thank you

  I ran your VI and everything seems fine for me!

  I get the table attached, when I ran the code.

  Are you using any non-English keyboard? or are there default settings in Excel with formatted cells?

  IAM using LV8.5, and I changed the value of the property of the range to Value2 in cell Value.vi Set (since there was a broken arrow)