Bind the control to the chronology of the effects with the chronology of the sequence

Similar Questions

• Binding the controls on the front panel programmatically

  It seems that Programmatic binding the controls on the front panel do not work when they are located in a tab control.

  Is this a known problem in LV 8.6?

  If the control of the façade is already bound to a URL of PSP you can link to another URL using DataSocket URL property during execution of the VI.

  

  If the front panel control is not bound to a URL of PSP, then you cannot attach it to the URL of the PSP when the VI is on. You can use the method AttachDataSocket of VI to change the link while the original VI is stopped (in edit mode).

  

• Windows could not automatically bind the Protocol IP on the network card stack.

  Hello

  I installed an Edimax EW-7718Un network adapter that does not connect to the internet. I installed the same device on my Windows Vista laptop and it works fine, this isn't a problem with the product or my BT Home Hub. I checked the Edimax website and this product is compatible with Windows 7, and I have the latest drivers for it. I did the following to try to resolve the problem:
  -I've already been on the adapter properties, and clicked on "update drivers", the system says that the network card is working properly and that the drivers are up to date. I also installed the latest drivers on the Edimax website but the issue is not resolved.

  When I solve the problem, he told me that "Windows could not automatically bind the IP protocol for the network card stack."

  Please note that the settings are correct as the TCP/IP and DNS are set on "automatically get an IPv6/4 address server / DNS automatically".

  Also of note is that in "Network connections" in the Control Panel, the device is listed as "Disabled", I click to activate it but it does nothing, the network connection is still disabled. When I click on "analyze what" the same message "Windows could not automatically bind the IP protocol stack to the adapter network." appears.

  I also have compeltely re-installed Windows 7 and use the system restore, neither worked.

  I hope you can solve this problem.
  Thank you
  Mickey

  Hi Mickey888,

  According to the information provided by the Edimax website this particular model supports up to Windows Vista only.

  http://www.Edimax.us/HTML/English/products/EW-7718Unspec.htm

  You can try to install the same in compatibility mode and see if that solves the problem. To run the troubleshoot compatibility utility follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to bind the user interface component to a display object that is created from a SQL query

  I use JDeveloper 11.1.1.2.
  
  I created a method in my ApplicationModule to create a dynamic ViewObject instance based on a 'voCode"passed in:
  
  public loadVO (String voCode) {} ViewObject
  
  ViewObject viewObject = findViewObject (voCode);
  If (viewObject == null) {}
  viewObject = createViewObject (programCode);
  }
  return viewObject.
  }
  
  I created a Client interface for this method and updated the control data of the ApplicationModule.
  
  The "Oracle JDeveloper 11g Handbook", I should be able to create a link from the tree and an executable methodIterator to the method of "loadVO" through the control of AOS data.
  
  I tried to manually add the binding to the definition of the page my page jspx, I like to see if I can replace an existing binding with this new binding.
  I was not able to add the link under "tree to create binding" 'Root Data Source' both 'Tree level rules' must be specified.
  I was able to specify the root 'Data Source' to point to the "loadVO" and the corresponding parameter, but not able to add a rule.
  When I clicked on the icon "+" to add the rule, anything that allowed me to clarify the rule (if I know which rule I should add).
  
  How can I bind the module of the application 'loadVO' method while it is exposed in the data control to provide data to a UI like PivotTable component?
  
  On the other hand, I was able to create the "methodIterator" first for the method 'loadVO' AM but I wasn't able to create a tree link to refer to the "methodIterator".
  Is it possible to call the method loadVO with the value of specific setting via the "methodIterator" of a bean method?
  
  Published by: pyin_amec on January 25, 2010 15:57
  
  I've corrected the subject line and change my question to better reflect the problem I tried to solve.
  
  Published by: pyin_amec on January 26, 2010 07:41

  Hello
  It worked for me... I created an inputtext area where I can enter a query and run...
  It could be that useful...

  AM Impl

       public void createVoWithQuery( String pQuery )
       {
  
            ViewObjectImpl vo = null;
            if( findViewObject( "DemoVo" ) != null )
                 findViewObject( "DemoVo" ).remove();
  
            vo = ( ViewObjectImpl )createViewObjectFromQueryStmt( "DemoVo", pQuery );
            //  vo.setKeyAttributeDefs( new int[]{0} );
            vo.executeQuery();
       }
  
       @Override
       protected void prepareSession( Session session )
       {
            super.prepareSession( session );
            if( findViewObject( "DemoVo" ) == null )
                 createViewObjectFromQueryStmt( "DemoVo", "Select 1 from dual" );
       }
  

  Page Def

  page

• How to bind the elements in the PC, items added in the "edit items...". "list of combobox

  Hello

  Could someone please tell me how can I bind the items added in the "combo box" could be linked to files saved in my PC and if a new file is added in the same folder in my PC, it could be added directly to the list of the combo box items... Thanking you in advance

  Concerning

  Julien

  Thank you very much...

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• How to bind the points left in the Microsoft Library

  I have documents stored in the part library materials - an example would be a report card scanned.

  I have pictures which was held as part of photo library - an example would be a photograph of the school.

  I have audio files which was held as part of the library music - an example would be the voice of a child for registration.

  All the foregoing is directly related, and what I want to know - is possible to connect the three elements that has someone opening (for example) the pdf file in the documents library as there are two other elements (directly related) place elsewhere in the library? It would be useful if someone wanted to delete an item without realizing that the other elements are linked to it.

  Another example:

  A brochure of the theatre (pdf) which was held in documents - where our children were part of a production.

  A film of the show in the videos.

  Pictures of before, during and after the show.

  Again, it would be useful to "bind" the elements in a way so that anyone (other than the originator) knows that what is perceived also has linked items.

  A final example (for years).

  Invitation of marriage service (word document), the list etc.

  Wedding photos.

  Wedding videos.

  Audio file of the days proceedings.

  I forgot to say running Windows 7 Professional on a desktop with 300 GB of 'stuff' in the library. For safety, I copy the contents of the library to two external drives.

  Also, I have a laptop running Windows 8.1 and have these machines (and others) on homegroup.

  All machines are up to date with all updates Microsoft etc..

  M

  Microsoft operating systems have containers where you can put all the content together.  Right click and create a new folder for "Report card" and put all your stuff on the report in there (photos, Documents, everything).  And when you open it, if you wish, you can always display them in sections so that you know what's different:

  

• bind the parameter to dynamic sql

  Dear user

  I want to bind the variable at run time

  the problem is as follows:-

  I have a table like this: -.

  type_id, rule_dtls, rule_id, using_paramter

  rule_id and type_id is an idea just to the rule and object

  using_paramter:-is parameters used to bind the variable to the rule, it may be different

  as examples of data the spouse;

  using_paramter can be different parameter as AREA, BOARD_NO or face_no,

  rule_id,	board_type,	rule_dtls	using_paramter
  1	7	CASE WHEN: BOARD_NO < 1000 then 10 when: BOARD_NO > 1000 then CEIL (: BOARD_NO/5000) * 5 end	BOARD_NO,BOARD_NO,BOARD_NO
  2	5	WHEN BOX: AREA < 3 then 15 when : AREA > 3 then (: SPACE - 3 * 2) + 15 end	BOX, BOX, BOX

  and I have the function of database 10g as follows:-

  CREATE OR REPLACE FUNCTION    get_bord_price(area number,face_no number,BOARD_NO number,BOARD_TYPE_v varchar2) RETURN number  IS
  amt number:=0;
  sql_v varchar2(500);
  BOARD_RULE varchar2(500);
  using_clom varchar2(500);
  price number;
  ERR varchar2(500);
  ERR_CODE NUMBER;
  BEGIN
  price:=0;
  select rule_dtls ,using_paramter into BOARD_RULE,using_clom from BOARD_RULE where BOARD_TYPE=BOARD_TYPE_v;
  sql_v:='select '||BOARD_RULE  ||' from dual';
  execute immediate sql_v 
  INTO price
  using using_clom;
  RETURN price;
  exception when others THEN
  ERR:=SQLERRM;
  return 0;
  END;
  
  
  

  the error is in

  using using_clom;

  How can I bind varable this:

  or is there another solution

  Hello

  Bind variables cannot be a variable.

  Identify the parts to be replaced (e.g.,: BOARD_NO,: AREA) and write statements to REPLACE to replace those.

  Manu.

• Is there a way to bind the content of a ListProperty?

  Hello

  Is there an existing way to bind the content of a ListProperty?  Consider the following:

  private final ListProperty<Worker<?>> workers = new SimpleListProperty<>(FXCollections.observableArrayList());
      public ListProperty<Worker<?>> workersProperty() {return workers;}
      public ObservableList<Worker<?>> getWorkers() {return workers.get();}
      public void setWorkers(ObservableList<Worker<?>> workers) {this.workers.set(workers);}
  
  
      private final ObservableList<Worker<?>> stateWatchedWorkers = FXCollections.observableArrayList(
              new Callback<Worker<?>, Observable[]>() {
                  @Override
                  public Observable[] call(final Worker<?> param) {
                      return new Observable[]{
                              param.stateProperty()
                      };
                  }
              }
      );
  

  What I want to do is to link the content of the list of stateWatchedWorkers workers.  If the entire list of workers is replaced, I want to update stateWatchedWorkers to match the contents of the new list.  In other words, I want a list of stateWatchedWorkers to match the current list is owned by owned by workers.

  James_D answered on StackOverflow.  With the help of Bindings.bindContent (target, listProperty) is what it takes.  It "just works".  Here is a code example to show how it works:

  import javafx.beans.Observable;
  import javafx.beans.binding.Bindings;
  import javafx.beans.property.*;
  import javafx.collections.FXCollections;
  import javafx.collections.ListChangeListener;
  import javafx.collections.ObservableList;
  import javafx.util.Callback;
  
  public class ListPropertyContentBinding {
  /* This is a quick test to see how ListProperty notifies about list changes
   * when the entire list is swapped.
   *
   * Conclusion: When the backing list is changed, ListProperty will perform
   * notification indicating that all items from the original list were
   * removed and that all items from the updated (new) list were added.
   */
  
  ObservableList oldPeople = FXCollections.observableArrayList();
  ObservableList newPeople = FXCollections.observableArrayList();
  
  // A list property that is used to hold and swap the lists.
  ListProperty people = new SimpleListProperty<>(oldPeople);
  
  // A list that includes an extractor.  This list will be bound to people and
  // is expected to additionally notify whenever the name of a person in the
  // list changes.
  ObservableList nameWatchedPeople = FXCollections.observableArrayList(
          new Callback() {
              @Override
              public Observable[] call(final Person person) {
                  return new Observable[]{
                          person.name
                  };
              }
          });
  
  public ListPropertyContentBinding() {
      Bindings.bindContent(nameWatchedPeople, people);
  
      nameWatchedPeople.addListener((ListChangeListener) change -> {
          while (change.next()) {
              System.out.println("    " + change.toString());
          }
      });
  
      Person john = new Person("john");
      System.out.println("Adding john to oldPeople. Expect 1 change.");
      oldPeople.add(john);
  
      System.out.println("Changing john's name to joe. Expect 1 change.");
      john.name.set("joe");
  
      Person jane = new Person("jane");
      System.out.println("Adding jane to newPeople. Expect 0 changes.");
      newPeople.add(jane);
  
      System.out.println("Updating people to newPeople. Expect ? changes.");
      people.set(newPeople);
  
      Person jacob = new Person("jacob");
      System.out.println("Adding jacob to oldPeople. Expect 0 changes.");
      oldPeople.add(jacob);
  
      System.out.println("Adding jacob to newPeople. Expect 1 change.");
      newPeople.add(jacob);
  
      System.out.println("Changing jacob's name to jack. Expect 1 change.");
      jacob.name.set("jack");
  
      System.out.println("Updating people to oldPeople. Expect ? changes.");
      System.out.println(" oldPeople: " + oldPeople.toString());
      System.out.println(" newPeople : " + newPeople.toString());
      people.set(oldPeople);
  }
  
  public static void main(String[] args) {
      new ListPropertyContentBinding();
  }
  
  class Person {
      private final StringProperty name = new SimpleStringProperty();
  
      public Person(String name) {
          this.name.set(name);
      }
  
      @Override
      public String toString() {
          return name.get();
      }
  }
  }
  

  .. .and the result of execution of the foregoing.

  Adding john to oldPeople. Expect 1 change.
      { [john] added at 0 }
  Changing john's name to joe. Expect 1 change.
      { updated at range [0, 1) }
  Adding jane to newPeople. Expect 0 changes.
  Updating people to newPeople. Expect ? changes.
      { [joe] removed at 0 }
      { [jane] added at 0 }
  Adding jacob to oldPeople. Expect 0 changes.
  Adding jacob to newPeople. Expect 1 change.
      { [jacob] added at 1 }
  Changing jacob's name to jack. Expect 1 change.
      { updated at range [1, 2) }
  Updating people to oldPeople. Expect ? changes.
   oldPeople: [joe, jack]
   newPeople : [jane, jack]
      { [jane, jack] removed at 0 }
      { [joe, jack] added at 0 }
  

• How to conditionally bind the declarative component custom ADF ADF Faces

  Hi gurus,

  I created the custom declarative component called "Historical Record", following the article of Frank Nimphus Oracle ADF Code corner: How to bind custom declarative ADF Faces components and it works perfectly find.

  But I want to strengthen further to make more generic, as in Oracle EBS we can go to all the blocks and choose Tools-> history of the record and it shows WHO columns to the currently selected record.

  The intention is conditionally bind the attributes of the component with columns of WHO bodies VO.

  The scenario is:

  * all tables have Created_Date, Modified_Date for columns of the WHO.

  * the page containing the 2 instances of VO with different source (for example:-> emp dept)

  * whenever I have navigate dept records it should display columns WHO selected dept and the same thing then to move through the records of the emp.

  Kind regards

  Ferrere

  Well as I said, you shouldn't try to rebuild the Oracle Forms technology-specific behavior in some other technologies such as ADF (because it is not usually possible).

  It is probably best to have a separate button for each shape (square to a coherent position on all pages - as some form, toolbar header...)

  If you want to rebuild the behavior of forms, then you can use the combination of af: clientListener / af:serverListener to set a flag (as the name iterator) see scope that can be used by your 'global' button to retrieve the correct data. Therefore, add af:clientListener to each component entry...

  Dario

• I am able to bind the text fields in Photoshop or InDesign model to a database so that the model can be updated dynamically without having to enter copy each time?

  Morning, all the

  I have a client who I want to design a model for a series of financial reports that go to investors every quarter. Information for reports from a database. There are 50 reports to be created for each investor. Rather than having to copy and paste the information manually from the database directly into text fields in Photoshop or Indesign, it is possible to bind the text boxes to this database?

  I was going to use Photoshop to design the model that I'm not very good at InDesign. But if I have to then I'll use InDesign.

  Would like any suggestions that I can not find an answer > thank you very much

  Both programs were given to merge. InDesign would probably work best for what you want to do, but you might be able to get away with PS:

  Using Photoshop | Create graphs based on data

  Using InDesign | Data merge

• I moved to a new more active iMac computer are unrelated. How to re - bind the?

  I moved to a new more active iMac computer are unrelated. How to re - bind the?

  Hello

  To link the asset, you must right-click on the assets in the active panel, and choose "connect".

  Then locate the saved file.

  Kind regards

  Neha

• A search criterion and the result as a table in the header. Wanted to bind the result table to bean to access the value of the key

  The search criteria and the result is displayed in the table in a group header.  I want to get the value of the selected row and analyze the value of Vo in the next page for a variable binding. So I need to manage the value biniding to the bean tbal, but there is no option to bind the table to a bean. So, how can I get the selected value.

  Kind regards

  K M Krishna.

  First tell us your version of jdev, please.

  to get to the selected line you need not to link the table to a managed bean. You can for example drag the necessary attributes of the VO on the page and drop them as components of a inputText. the framework then generated the attribute bindings and sets the values of the current row for them. As you do not really need the inputText elements switch to source view (! it is essential!), then remove them. This will eliminate the Visual component, but attribute bindings are stored.

  Know you can access the values through their EL or as you get the value of an attribute via it's mandatory.

  Timo