Bind values

Similar Questions

• EA4: enter the bind values dialog box

  For some of my reports, I bind values and the user is prompted to accept the incoming. Everything works well, but is this normal when you enter (say 4) in the box and press on enter, accept the dialog that CR? I would normally expect the button apply be hurry to hit the Enter key. This is expected behavior?

  REDA

  Yes, this is normal behavior even in versions of pre SqlDev4EA1.  It allows you to enter as a bind value multiline text.  All links are treated as data of type varchar, so if you use it as part of a numeric or date, you must explicitly convert the appropriate data type.

• binding values in Multiselect guest-urgent

  Hi guys,.
  I have a problem. I need to constrain the values in a guest of multiple selection based on the values of an another command prompt.
  Now the problem is, the multiple selection prompt is binding values, but when I search another value (which must have been limited) it appears.
  
  I tried using variable presentation in the SQL for the guest. But also, it does not work.
  
  Any help please...
  
  Kind regards
  Ronnie

  Do you use two different guests or a prompt with two selections of column inside. If it's a prompt then you cannot use pre. variable in the sql query. given that the variable will be set only after you press 'go '. create two guests. one with pre. variable. then use this variable in the second line. in your dashboard you must select a value from the first fast b4 using your multiple selection prompt.

• Preserve Bind values in the SQL worksheet

  Hello

  When you run the SQL statements with var/binding settings, SQLD can persist values entered the tool reboots?

  Is there a preference that controls this?

  Java (TM) Platform	1.7.0_71
  Oracle IDE	4.0.3.16.84
  Support for versioning	4.0.3.16.84

  Thank you

  Manish

  Never mind. Found, he looked at me, but I was blind.

  Under the worksheet, check 'Save the Bind Variables on the disc to the output'.

• How to set the bind value of list by program

  Hello

  I have a binding list that is accessible from EL #{bindings.myList.inputValue}. I would like to set its value programmatically.

  How to do this?

  JDev 11.1.2.4

  Thank you

  BindingContext bctx = BindingContext.getCurrent ();

  BindingContainer links = bctx.getCurrentBindingsEntry ();

  JUCtrlListBinding = lov

  (JUCtrlListBinding) bindings.get ("name");

  Thank you

• How to pass variable separated by commas in the bind value of VOquery?

  Version 11.1.1.3.0
  The guys need to help you on this
  
  I have a VO with query somethg as below
  
  SELECT *.
  FROM a schema. Table-name
  WHERE (: Bind_Varible has the value null or Column_Name IN (: Bind_Varible))
  
  User will be be select several values of the screen and I need to pass these value above bind variable.
  But in the variable binding ADF take everything as a single string, then, how can I pass values separated by commas?
  
  As SELECT *.
  FROM a schema. Table-name
  WHERE (: Bind_Varible has the value null or Column_Name IN (99,55))
  
  Thank you
  Any help will be appreciated

  I put mine up in this way, my binding variable is a list of values separated by commas, that is to say ("A, B, C, D") (I have a select that many shuttle) then I used a regexp substr to turn them into a list

   WHERE    :Bind_Batch_NM_Comma_Sep_List IS NULL
           OR batch_nm IN
                 (    SELECT REGEXP_SUBSTR (:Bind_Batch_NM_Comma_Sep_List,
                                            '[^,]+',
                                            1,
                                            LEVEL)
                                batch_nm
                        FROM DUAL
                  CONNECT BY LEVEL <=
                                  REGEXP_COUNT (:Bind_Batch_NM_Comma_Sep_List,
                                                ',')
                                + 1)
  

  Published by: pollywog on September 18, 2012 16:07

• bind values of type date

  In a query like
  
  Select * from user_tables where last_analyzed between: start and: end
  
  It is possible to enter values of bind as the 01.05.2009 German date format
  But if change the query to
  
  Select * from user_tables where last_analyzed between: start and: end + 1
  
  We get an error
  
  ORA-00932: inconsistent data types
  
  Why is it not possible to add a day to the value date of this way.
  Is there a solution without using to_date in the query?

  You implicitly answered your own question:
  You say you want to use the TO_DATE, so that you know that you have really entered a TEXT value. And adding a number to a string won't work.
  So the only option is to convert the string to a date first, using TO_DATE, then add a day.

  BTW, I always use TO_DATE because the current date format may change at any time. Try to set it in preferences - Database - NLS settings and you will see that your query no longer works. One more reason to use ;)

  Kind regards
  K.

• What is the syntax to judge a binding value is null?

  Hello

  12.1.3 JDev is used.

  I want to judge #{bindings. ReviewerA.inputValue} is null or not, what is the syntax? I use this to control the visibility of a tab, however no matter the value actually is zero or not, the tab will appear, I am currently using "#{bindings." ReviewerA.inputValue} is empty", it works very well, thank you

  -Liang Yi

  I want to judge #{bindings. ReviewerA.inputValue} is null or not, what is the syntax?

  #{bindings. ReviewerA.inputValue == null} or #{bindings. ReviewerA.inputValue! = null}

  I am currently using "#{bindings." ReviewerA.inputValue} is empty. "

  As far as I KNOW, 'empty' syntax is: #{empty links. ReviewerA.inputValue}.

  Dario

• How to bind values to a query of VO poplist

  Hello
  
  This is the query for the VO that I use for a poplist for a field in a custom zone.
  
  Get the value of the tag running (it's actually the de FACTO forces for the party framework) and I want to display only certain search values in the poplist, depending on the context of de FACTO a part.
  
  I have the party_id with me and I use it to get the context of de FACTO in its regard.
  
  
  How (and where) can I pass a value for the tag parameter in that query (used for my VO poplist)?
  
  
  Select lookup_code attribute_code,
  CASE
  WHEN trunc (sysdate) between
  NVL (trunc (start_date_active), trunc (sysdate))
  and nvl (trunc (end_date_active), trunc (sysdate))
  SO what does mean
  ELSE ' ZZ inactive-do not use: ' | sense
  END attribute_meaning
  tag attribute_tag
  of fnd_lookup_values_vl
  where lookup_type = 'XXG_AR_ADDN_ATTRIBUTES. '
  and enabled_flag = 'Y '.
  and the tag =: 1
  
  
  Thank you.
  
  Published by: sseth29 on March 12, 2009 15:27

  Please check if you have set the Pick List View Definition or Instance to view of list of choices. Note that in this case you should have Pick List View instance and not pick up the definition of the list view.

  Concerning
  Sumit

• read the value of the variable binding

  Hello
  
  I was debugging a java application and in the process, I wanted to know what values the request as a bind variable. So, I checked v$ sql_bind_capture and activated the trace on the session. Unfortunately the data type is TIMESTAMP, so the view did not show a value and I got the trace was a memory dump that is not helpful for me:

   Bind#1
    oacdty=180 mxl=11(11) mxlc=00 mal=00 scl=00 pre=00
    oacflg=03 fl2=1000000 frm=01 csi=873 siz=0 off=24
    kxsbbbfp=fffffd7ffdb6fbd0  bln=11  avl=07  flg=01
    value=
  Dump of memory from 0xFFFFFD7FFDB6FBD0 to 0xFFFFFD7FFDB6FBD7
  FFFFFD7FFDB6FBD0 0D0B6C78 00010101                    [xl......]

  Is there a function/method to convert a timestamp or at least vice versa?

  Just run this little test:

  SQL> CREATE TABLE t (c1 TIMESTAMP);
  
  Table created.
  
  SQL> INSERT INTO t VALUES (TRUNC(SYSTIMESTAMP));
  
  1 row created.
  
  SQL> COMMIT;
  
  Commit complete.
  
  SQL> SELECT TO_CHAR(c1) FROM t
    2  UNION
    3  SELECT DUMP(c1) FROM t;
  
  TO_CHAR(C1)
  --------------------------------------------------------------------------------
  13-NOV-08 00.00.00.000000
  Typ=180 Len=7: 120,108,11,13,1,1,1
  

  Convert decimal to hex you gives 78, 6 C, 0, 0 D, 01, 01, 01 what byte order accountant reverse is the same as your memory dump. So I think the bind value is 00:00:00:000000 November 13, 2008.

  Not very well how to recover of the hexagon directly at the time, but I do not know someone knows!

  In fact, Google has been very helpful... take 100 on the first two decimal values: 120-100 = 20; 108-100 = 08, to give you the year: 2008. Then 11 and 13 are the month and day. The rest is hour + 1 minute + 1, the second + 1. So just convert your hex decimal and you should be able to discern the value!

  Published by: Mike Pargeter 13 November 2008 16:54

• Estimate of poor cardinality using Bind Variables

  Hi I'm using the 11.2.0.4.0 Oracle version. I have a query that is underway for the plan of the poor execution by the estimate of poor cardinality for two tables (I've extracted and published this part only) as I mentioned below, the individual conditions for which the estimate goes bad and moving entire query execution path.

  These are for two tables and currently we use BIND variable for them in our code, and I notice, its best estimate gives with literals. I need to know how to handle this scenario that I need this query to execute for all types of volumes. Is there something I can do without changing the code, as it works well for most of the execution? In the current scenario of the main query that uses those below tables providing a plan (index + nested loop) that works very well for small volume, but running for 10 hr + for large volume as ideally its going to the same regime.
  And Yes, most time that this request will be hit for small volume, but killing some appearance of large volume presents the performance of the queries.

  
  Here are the values of the variable binding.

  B1 VARIABLE VARCHAR2 (32);
  B2 VARIABLE VARCHAR2 (32);
  B3 VARIABLE NUMBER;
  B4 VARIABLE VARCHAR2 (32);
  B7 VARIABLE VARCHAR2 (32);
  B5 VARIABLE NUMBER;
  B6 VARIABLE NUMBER;

  EXEC: B1: = 'NONE ';
  EXEC: B2: = NULL;
  EXEC: B3: = 0;
  EXEC: B4: = NULL;
  EXEC: B7: = NULL;
  EXEC: B5: = 0;
  EXEC: B6: = 0;

  ---- For  TABLE1-------
   -- Published Actual VS Etimated cardinality
   
   
  -- With bind values
  select * from TABLE1 SF
  WHERE (   (SF.C1_IDCODE = :B4) OR (NVL (:B4, 'NONE') = 'NONE'))
      AND ( (SF.C2_ID = :B3) OR (NVL (:B3, 0) = 0));
  Plan hash value: 2590266031
  -----------------------------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                 | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem |
  -----------------------------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT          |                     |      1 |        |  28835 |00:00:00.08 |    2748 |     46 |       |       |          |
  |*  1 |  TABLE ACCESS STORAGE FULL| TABLE1              |      1 |     11 |  28835 |00:00:00.08 |    2748 |     46 |  1025K|  1025K|          |
  -----------------------------------------------------------------------------------------------------------------------------------------------
  Predicate Information (identified by operation id):
  ---------------------------------------------------
     1 - storage((("SF"."C1_IDCODE"=:B4 OR NVL(:B4,'NONE')='NONE') AND ("SF"."C2_ID"=:B3 OR NVL(:B3,0)=0)))
         filter((("SF"."C1_IDCODE"=:B4 OR NVL(:B4,'NONE')='NONE') AND ("SF"."C2_ID"=:B3 OR NVL(:B3,0)=0))) 
   
  -- With literals 
  select * from TABLE1 SF
   WHERE  (   (SF.C1_IDCODE = null) OR (NVL (null, 'NONE') = 'NONE'))
        AND ( (SF.C2_ID = 0) OR (NVL (0, 0) = 0));
     Plan hash value: 2590266031
  --------------------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                 | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers |  OMem |  1Mem | Used-Mem |
  --------------------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT          |                     |      1 |        |  28835 |00:00:00.03 |    2748 |       |       |          |
  |   1 |  TABLE ACCESS STORAGE FULL| TABLE1              |      1 |  28835 |  28835 |00:00:00.03 |    2748 |  1025K|  1025K|          |
  --------------------------------------------------------------------------------------------------------------------------------------
  
  --------For TABLE2 ----------------------- 
  -- Published Autotrace plan, as it was taking long time for completion, and actual cardinality is 45M, but its estimating 49 With bind value---
  
  --withbind value
  select * from TABLE2 MTF
  WHERE (   (MTF.C6_CODE = TRIM (:B2)) OR (NVL (:B2, 'NONE') = 'NONE'))
    AND (   (MTF.C3_CODE = :B1)  OR (NVL (:B1, 'NONE') = 'NONE'))
    AND (   (MTF.C4_CODE = :B7)  OR (:B7 IS NULL))
    AND (   (MTF.C5_AMT <= :B6)  OR (NVL (:B6, 0) = 0))
    AND (   (MTF.C5_AMT >= :B5)  OR (NVL (:B5, 0) = 0));
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1536592532
  -----------------------------------------------------------------------------------------------------------
  | Id  | Operation                  | Name         | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
  -----------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT           |              |    49 | 10437 |   358K  (1)| 01:11:43 |       |    |
  |   1 |  PARTITION RANGE ALL       |              |    49 | 10437 |   358K  (1)| 01:11:43 |     1 |  2 |
  |*  2 |   TABLE ACCESS STORAGE FULL| TABLE2       |    49 | 10437 |   358K  (1)| 01:11:43 |     1 |  2 |
  -----------------------------------------------------------------------------------------------------------
  Predicate Information (identified by operation id):
  ---------------------------------------------------
     2 - storage(("MTF"."C4_CODE"=:B7 OR :B7 IS NULL) AND ("MTF"."C3_CODE"=:B1 OR
                NVL(:B1,'NONE')='NONE') AND ("MTF"."C5_AMT"<=TO_NUMBER(:B6) OR NVL(:B6,0)=0) AND
                ("MTF"."C5_AMT">=TO_NUMBER(:B5) OR NVL(:B5,0)=0) AND ("MTF"."C6_CODE"=TRIM(:B2) OR
                NVL(:B2,'NONE')='NONE'))
         filter(("MTF"."C4_CODE"=:B7 OR :B7 IS NULL) AND ("MTF"."C3_CODE"=:B1 OR
                NVL(:B1,'NONE')='NONE') AND ("MTF"."C5_AMT"<=TO_NUMBER(:B6) OR NVL(:B6,0)=0) AND
                ("MTF"."C5_AMT">=TO_NUMBER(:B5) OR NVL(:B5,0)=0) AND ("MTF"."C6_CODE"=TRIM(:B2) OR
                NVL(:B2,'NONE')='NONE'))
    
  -- with literal
  select * from TABLE2 MTF
  WHERE (   (MTF.C6_CODE = TRIM (null)) OR (NVL (null, 'NONE') = 'NONE'))
   AND (   (MTF.C3_CODE = 'NONE') OR (NVL ('NONE', 'NONE') = 'NONE'))
    AND (   (MTF.C4_CODE = null)  OR (null IS NULL))
     AND (   (MTF.C5_AMT <= 0)  OR (NVL (0, 0) = 0))
    AND (   (MTF.C5_AMT >= 0)  OR (NVL (0, 0) = 0));
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 1536592532
  -----------------------------------------------------------------------------------------------------------
  | Id  | Operation                  | Name         | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
  -----------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT           |              |    45M|  9151M|   358K  (1)| 01:11:41 |       |    |
  |   1 |  PARTITION RANGE ALL       |              |    45M|  9151M|   358K  (1)| 01:11:41 |     1 |  2 |
  |   2 |   TABLE ACCESS STORAGE FULL| TABLE2 |    45M|  9151M|   358K  (1)| 01:11:41 |     1 |  2 |
  -----------------------------------------------------------------------------------------------------------
  
  select column_name,num_nulls,num_distinct,density
  from dba_tab_col_statistics where table_name='TABLE2'
  and column_name in ('C3_CODE','C4_CODE','C5_AMT','C6_CODE');
  C3_CODE 0 65 0.0153846153846154
  C4_CODE 0 2 0.5
  C5_AMT 0 21544 4.64166357222429E-5
  C6_CODE 1889955 71 0.0140845070422535
  
  

  933257 wrote:

  ((SF. C1_IDCODE =: B4) OR (NVL (: B4, 'NONE') = 'NONE'))

  In fact for literals, I did not find any section of the predicate after running the sql code with activation "set autotrace traceonly explain."

  The main problem is with another large query whose cardinality is underestimated due to the presence of these table (table1, table2) with the above mentioned clause, and the query is for the analysis of index + nested with values of Bind loops and take 10 hr +, whereas with literals, its completion in ~ 8minutes with FTS + Hash Join.

  Your real problem is that you try to have just a single SQL query handle all POSSIBLE thanks to the use of embedded FILTERS ' either / or ' filters in the WHERE clause.  You want only a select this OPTION to run whatever filters have been selected at run time by the user or the application using it.  And it would never work.  You really need to SELECT different queries for different combinations of filter conditions.

  Why?  Think for a minute.  How Oracle works internally?  A SQL SELECT query gets analyzed and an execution plan is produced which is stored in the library cache and gets REUSED on all subsequent executions of this query - except in certain cases where there may exist several plans run through several cursors of the child.  So with only SELECT a query you only AN execution plan in the library cache, to be used by all THE executions of this query, regardless of the value of your run-time binding variables.

  Lets put another way - each library cache execution plan is associated with a SQL statement.  If you want a DIFFERENT execution plan then you need run a DIFFERENT SQL statement.  That's how you get a different execution plan - by running a different SQL statement.  Running the SAME SQL query generally you will get the SAME execution plan every time.

  In addition, because of the "either / or" filters that you use you will end up generally with a full Table Scan on each of the referenced tables.  Why?  Given that the optimizer must produce an implementation plan that manages all possible contingencies for all values of possible bind variables in the SELECT.  If the optimizer should choose to use any index based on one of these "either / or" filters then it would only help performance when real value was provided, but it would be really bad if a NULL value was supplied.  If the optimizer ends up ignoring the index because they are not always optimal for all possible input values and instead chose a plan that is "good enough" for all input values possible.  That means that it will use a scanning Table full.

  I hope you can see that it is precisely what is happening for you with your query.  You select this OPTION to manage the different combinations of filter, which leads to the execution plan only one, which leads to scans full Table on the referenced tables in these ' either / or ' filters.

  The solution?  Build queries SELECT DIFFERENT when input values are NULL.  How you do that?  Read this article to ask Tom that tells you:

  http://www.Oracle.com/technetwork/issue-archive/2009/09-Jul/o49asktom-090487.html

  To sum up - when you have real value for a bind variable 'bind_var1' add the following filter to your CHOICE:

  AND column_name1 =: bind_var1

  When the binding variable is NULL, add the filter according to your CHOICE:

  AND (1 = 1 OR: bind_var1 IS NULL)

  Now, you'll have 2 queries SELECT must be performed, which have exactly the same number of variables in the same order bind, which is important.  When you then run one of these variations, Oracle can analyze and optimize each one SEPARATELY, with a single execution by the SELECT query plan.

  When you provide a real value, the filter is a normal 'column = value' that the optimizer can use all indexes on this column, because NULL values are not referenced.

  When there is no real value, the optimizer will analyze the '1 = 1 GOLD' and realize that "1 = 1" is set to TRUE and GOLD, it is quite TRUE regardless because the binding variable is null or not.  This means that the optimizer will actually REMOVE this filter, because it filters nothing because it is always TRUE.  You will end up with an operating plan based on the other filters in the query, which is what you want because you have no filter on this column.

  What is it - producing distinct SELECT queries to determine if you have a real value to filter or not you end up with DIFFERENT execution plans for each of them, and each of them is OPTIMAL for this particular set of filters.  Now you get good performance for each variation of the performance of the SELECTION, rather than sometimes good and sometimes very bad when using SELECT only one.  It is impossible to try to get multiple shots of execution 'optimal' out of a SELECT query.  That's why you get mediocre performance under different bound the values of the variables.

  John Brady

• HOW automatically update the values of the attributes in a VO?

  Hi, experts,

  In jdev12.1.3

  There are two attributes in the original Version, when the line is created or updated and sent, these attributes should be updated automatically:

  1 revise_date: the current datetime object is defined on it;

  2 revisor: employee name of the user who is a field in the page will be defined on it.

  I rewrote the code for RowImpl.java of the VO as java:

  public Date getReviseDate()

  {

  return ((Row.EFFDT_UPDATE_CHANGE_INSERT_MODE == this.getETask () .getEntityState ())

  || ((Row.STATUS_NEW == this.getETask () .getEntityState ())) ? (Date) Date.getCurrentDate ():

  GetAttributeInternal (REVISEDATE) (date);

  }

  But it did not work as I hope. What is wrong with him?

  In addition, in order to set the value of revisor, how do I bind values of a reference of a jsf in RowImpl.java of the VO page
  
  

  Thank you!

  Or you can update specific attributes in the method DO DML in your EO Impl class

  Oracle ADF and Jasper ireport tips: overview of the ADF OT and VO classes

  Ashish

• How many times can I use a variable binding in a query of the VO?

  Is it possible that I can use a variable binding in a query of VO just once?

  I test a query that keeps throwing the Houston-27122 error by pressing the application module tester. I tried to limit the problem to the simplest possible case, and it seems that the error is caused by the fact that I use the same variable bind two or more times.

  When the query looks like this:

  

  I have run, enter 'x' and it returns me the result.

  When I change to:

  

  I have run, enter the value

  

  and immediately get the error

  

  The same thing in sqlplus runs without problem:

  

  My version of JDev is build JDEVADF_11.1.1.9.0_GENERIC_150314.0718.6673

  Please, advise.

  P. S. where can I find documentation queries are supported in your? In particular, I'm interested if I can use WITH the clause. There seems to be some confusion on this matter (see, for example, Oracle SQL WITH clause support - JDeveloper and ADF)

  Thank you.

  It depends on:

  Open your VO in JDev and go the the query page.

  In the lower part, there is a drop down 'link type', it is usually set to "JDBC-positional. In this case, you will need to provide the bind value for each occurrence of the variable binding separately.

  You could change that to "named" (don't remember the exact name). But beware, this will also affect all relatioships master retail to others your. I think that this is not a good idea to change the style of binding to a single VO.

  Good bye

  DPT

• inputText and ouputText does not display the same value

  Hello

  JDev 11.1.2.4

  On my page, I have an inputText and outputText bound to the same link of the attribute. The bind value is defined in a value change listener, and then the two components are updated. Say I put in 2009 for the PeriodFrom, the inputText remains empty, but the outputText shows the 2009. How is possible that the two items related to the same link does not show the same value.

  < af:inputText value = "#{bindings." PeriodFrom.inputValue}"required =" #{bindings. " PeriodFrom.hints.mandatory}.

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  < f: validator binding = "#{bindings." PeriodFrom.validator} "/ >"

  < / af:inputText >

  < af:outputText value = "#{bindings." PeriodFrom.inputValue}"id ="ot3"clientComponent ="true"/ >

  Furthermore, I tried to get the RichInputText component and call a getValue on it, and the value returned is 2009. I'm completely lost.

  Thank you

  I made the fragment of page from scratch. I discovered why the update does not work. This is because the selectOneChoice is inside an af:subform. If I remove the subform, the update works correctly.

  shortDesc = "#{bindings." StdcntyCode.hints.tooltip}"id ="soc2"simple ="true"autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.identificationSessionEditBean.countryValueChangeListener}" > "

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  columns = "#{bindings." PeriodTo.hints.displayWidth}"shortDesc =" #{bindings. " PeriodTo.hints.tooltip}"id ="id2 ".

  autoSubmit = "true" simple = "true" >

• Printing of VO motion with a dynamic value to console (Journal)

  Hello

  Kindly guide as how to print the query of the VO with the run to the console settings.

  I used vo.getQuery (). But in Diagnostic messages, bind values are coming up as "variable1 =: 1". Instead, I want to display the value of linking the exact duration as "variable1 = value" for debugging purpose.

  Please suggest.

  Kind regards

  Zahid

  Hello

  Write '-Djbo.debugoutput = console "in run options.

  This example displays all the queries in the console. You will always see: 1 bind variables, but you can also see the values of bind under queries.

  Kind regards

  Anil