BIOS corrupted in the new motherboard for computer laptop g6-1050sv

Similar Questions

• Where to get the new motherboard for Satellite Pro L40 - 14 d

  Hey there.

  I have a Satellite Pro L40 - 14 d (I think).
  My son hit a small stool and he fell on the side of the PCI Express card (which has been inserted).
  Needless to say that the pci card no longer works.

  I opened it to the top, and it seems that the pins were torn off of the motherboard.
  Can it be fixed, I'm not so sure?

  Then someone know where I can get my hands on a new motherboard? I've scanned the internet but come in white.

  See you soon

  Hello

  This model of laptop is fairly new, and I imagine that it will be difficult to get the new motherboard. Of course, you can order one by authorized service provider, but it will be expensive.

  Have you checked eBay? With a little luck, you'll find a L40 with faulty display or any other hardware problem. Maybe using two defective notebooks, you can have one that works correctly. ;)

  By the way: I assume you want to disassemble without maintenance manuals. Be careful!

• new building for computer laptop 15-p206na: increase the size of the ram

  Hi all

  I think of a new laptop as my old compaq (vista 32 bit) more than 8 years now. reflected on this model

  Pavilion 15-p206na: this is a 1 to GB drive HARD and 8 DDR3L (1 X 8 GB) with windows 8.1 (64)

  Just a question can the RAM be increased to allow more memory?

  Any advice would be good & very much appreciated: thank you very much: Derek...

  Spoiler (Highlight to read)

   

   

  Hello! Welcome to the Forums HP's Support , I ' am 1029rjmemvy17t is a great Place for Information/Help and I'll be happy to help you!

  The max ram for this computer is:

  16 GB kit (8GBx2) DDR3 PC3-12800 1600 MHz 

  Good luck!

  Looks: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• replacement of the card wifi for computer laptop dv6 - 6163 cl/entertainment

  One of the computers in my house guard hp down a wifi connection.  Other computers have no problem.  I did troubleshooting, updating the driver Intel Centrino 1000 n, checked for viruses and spyware, made starting diagnosis, tried in safe mode; nothing worked and the problem persisted in SafeMode with network.

  I would like to replace the wifi card, but I wonder if there is another wifi card that can be used on this computer instead of buying the same wifi card.

  Is there some other wifi cards that can be used on this computer, and where I can buy one?

  Hello @fireflymd,

  I see that you are looking to replace your laptop wifi card. I will try to help you with this.

  Here is a list of compatible with your laptop wireless cards:

  WLAN module
  Atheros WiFi 802.11b/g/n, Bluetooth 4.0 adapter and 1 × 1 9485GN 3012 655795-001
  Broadcom 4313 802.11b/g/n WiFi and 2070 Bluetooth 2.1 + EDR adapter 1 × 1
  (BT3.0 + HS loan)
  600370 001
  Broadcom 4313 1 × 1 593836-001 802.11b/g/n WiFi card
  Broadcom 4313GN 802.11b/g/n WiFi and Bluetooth 20702 4.0 Combo Adapter 657325-001 1 × 1
  RALink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo adapter
  (BT3.0 + HS loan)
  630705 001
  RALink 5390GN 802.11b/g/n adapter WiFi 630703-001 1 × 1
  For use only with the computer models equipped with an AMD processor:
  Atheros 9285 G 802.11b/g/n WiFi 605560-005 adaptor 1 × 1
  AR8002WB-1NGB of Atheros 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo adapter
  (BT3.0 + HS loan)
  593127 001
  Realtek RTL8191SE 802.11b/g/n WiFi adapter 640926-001 1 × 1
  Realtek 8188BC8 802.11a/b/g/n 2 × 2 WiFi and Bluetooth 3.0 + HS Combo Adapter 602993-001
  For use only with the computer models equipped with an Intel processor:
  Intel Centrino Advanced-N 6230 631956-001
  Intel Centrino Wireless-N 1000 593530-001
  Intel Centrino Wireless-N + WiMAX 6150 633817-001

  The information on page 67 of the maintenance and Service guide.

  I hope that this could help you.

  Thanks for posting on the HP Forums.

• Pavilion dv6t Notebook: replacing the hard drive for computer laptop dv6t

  I bought a Pavilion DV6t Notebook in 2010 and now get reviews of hard drive failure. I have a HDD 640 drive, I can replace my hard drive with the following: Seagate Momentus 7200 750 GB at 7200 RPM / MIN SATA 3 Gb/s 16 MB Cache 2.5 inch laptop laptop hard drive internal-naked drive ST9750420AS by Seagate

  Thank you.

  Hello

  Yes, this HARD drive works perfectly.

  Kind regards

  DP - K

• Need new motherboard for Satellite Pro C50-A-1E0

  C50-A-1E0 Satellite Pro to my son is gone completely t * ts up. I think it's a common fault and requires a reset of the bios, or something. I think in any case that a new motherboard will do the trick.

  No help on the motherboard to get which is compatible and it would actually help?

  Thank you.

  Hi nessie

  It is not easy to find the new motherboard and believe me it's quite expensive, you can buy the new notebook.

  What you can do is to contact the nearest Toshiba service provider first. Explain the situation and ask if they can help you with this. They are also able to get the new motherboard for you.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

• Need new motherboard for Equium P300-16 t

  Hello!

  I have Toshiba Equium P300-16 t, model PSPC2E-003003KS number, one day, my computer does not start. don't answer no signal on the screen. so I really think that this motherboard is broken, or turns off! does anyone know how can I get new motherboard for my laptop?

  I have given where to see the name or number of the motherboard. where I also see this?

  Please people! I really need help!

  Thank you

  Hello

  I can imagine to find the new motherboard will be quite problematic and what you can do is to contact nearest Toshiba authorized maintainer and ask for help.
  They have access to the database of Toshiba and can tell you the exact reference.
  For you is important to get the motherboard for model PSPC2E and it will be exactly the same.

  Problem is this motherboard is very expensive so think twice what is the best option for you: to exchange it or buy new laptops.
  You want to exchange it only?

• I have to buy a new motherboard for the upgrade?

  I have the HP Pavilion P6130y and I want to get the geForce GTX 460 and this power supply

  http://www.Newegg.com/product/product.aspx?item=17-139-004&SortField=0&SummaryType=0&PageSize=100&Pu...

  What I have to buy a new motherboard for this to work or am I fine with the motherboard I have now?

  My computer motherboard is here

  http://support.HP.com/us-en/document/c01635734

  Hello

  The power supply that you intend to buy should work fine with your motherboard.  The only thing that I would say check, as with any upgrade, is that the power supply and new graphics card will physically ok inside the Tower - always best to check with a rule in order to ensure

  Best wishes

  DP - K

• Can't install software for HP Photosmart C4200 Photosmart on the new Windows 7 computer

  I'm unable to install the software for a HP Photosmart C4200 Photosmart on the new Windows 7 computer.  Says it's not compatible with OS.  Is there any solution for this?

  Hello

  Because the CD is not compatible with your operating system, you can download the software on the web.

  Please follow the link below for the software dowsnload Windows 7 from your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74842-1&cc=us&DLC=en&LC=en&OS=4062&product=3192753&sw_lang=

  Make sure you do not connect USB until prompted to do so during the installation.

  Shlomi

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Need a new motherboard for Satellite Pro L40

  Hi, the motherboard in my laptop is toast...
  Then someone please help me, I don't know where to buy a new motherboard for this computer for...
  I'd appreciate any help, pointers in the right direction

  Thank you

  Satellite Pro L40
  model PSL43E-00R005AR

  An authorized service provider can quote and replace the motherboard for you. There is a list of ASP on the Toshiba site.

• How to find the exact motherboard for Satellite P100-347 model?

  Hello
  I hope someone could help me. I'm looking for a new motherboard for my computer toshiba laptop because it replaced needs.

  I own a laptop Satellite P100-347 of pspa6e-03302cen and have not been able to find this anywhere online forum. Although I found two suppliers of many motherboards of p100, they use numbers of alternative model in which I can't find anywhere in my documents or on the computer. The model numbers they use are something like A000008350 or a number starting with k. I'm sure that the supplier I found has the motherboard, I would need but I would need a list of all the numbers of the other party for my laptop, or a way to find the exact numbers. Any help on this is appreciated...
  Thank you

  To be honest I really don't think that someone here can offer you this info. As you know, this info is for internal use and you can try to get this info from service provider authorized in your country. Sorry, but I don't see a better solution, except to wait here and hope someone can help.

  Good luck!

• Install the new motherboard and now asked to reactivate.

  Pretty much my old motherboard died on me in order to get a new motherboard and ram set up, after a little got it works and things are fine, until I check the system information and he said 11 days til trial, please activate Vista. "I clicked on the link sense my product code is still there and he told me reintroduce.  I try and it still says invalid code.

  Before installing the new motherboard, it was a HP computer premade, I contacted them and was told that I had to talk to Microsoft.  Sense, I've been jumping through the same process for about an hour, I decided to check the forms come out and ask here for any help.  The softwar is OEM Microsoft Vista Prem Home with SP 2.

  Help, please?

  Real, that I decided to break it down and get 7 Finally in any case, thanks for all the help

• Microsoft cares if I use my old OS OEM with the new motherboard?

  I am building a newish computer; Microsoft cares any longer, if I use my old OS OEM with the new motherboard? All of the previous answers to this question are all about 2011 are resolutely "affirmative", they care. I know that Microsoft has had a change of heart (at least I think) regarding their operating system. With the upcoming free update, I was hoping I could recycle my Windows 7 64 bit, an increase in the time up to 10 comes out.

  Thank you.

  Drew

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  If its licensed manufacturer OEM System you bought, you could probably get away with the re-activation by telephone. You can always give it a try.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us