BIOS reports that node NUMBER 1 has no memory during installation VMVisor - 4.1 on ASUS KGPE-D16

Similar Questions

• "The activation server reported that the product key has exceeded its limit of unlocking". Error

  Hello

  I recently changed my motherboard and processor because my old card mother and fried CPU. I had Windows 8 Pro (64-bit) installed earlier, an upgrade to Windows 7 (64-bit). As soon as I started first of all, I got a notification asking me to re - activate my Windows but when I try to activate it with my original key, I get this error: "the activation server reported that the product key has exceeded its limit of unlocking".

  I tried to activate by phone, but instead connect to the automated system, I keep to redirect to voicemail after a few rings. Can someone help me to activate my Windows again? I'm in Karachi, Pakistan.

  The report shows that it is been activated previously, but that the material has changed considerably since the activation - hence the request for reactivation.

  Not too surprising if you traded motherboards. :))

  Telephone activation is definitely the way to go - but it's in the lap of the gods (i.. activation e. operator the MS) as to if they will allow it if the original Win7 installation was an OEM.

  My belief is that they will allow him - of some people hold that they will not :)

• Buy the product yesterday, even if Adobe CC reports that the trial period has expired and won't let me in, the purchase was done without problem, any ideas?

  Buy the product yesterday, even if Adobe CC reports that the trial period has expired and won't let me in, the purchase was done without problem, any ideas?

  Hello

  Please see

  Connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Activation of Windows7 get error 0xc004c020 "the activation server reported that the Multiple Activation key has exceeded its limit."

  I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?

  Hello

  Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx

  MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.

  Hope that helps.

  Kind regards

  Joel

• software licenses reported that the computer BIOS is missing a required license

  • software licenses reported that the computer BIOS is missing a required license

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3e1da59f-AA81-446d-a1b9-582c61e158d3 if this post answered your question, click mark as answer .

• A report that will show how a user has used the secure area?

  Hello everyone.

  I need to view a generated in the report on the activities of the Member section to securezone.

  The ideas are greatly appreciated.

  I've tried selecting the protected area (in the areas of Secure), click on action -> View Secure area usage report

  But it just displays: no data available for the period selected. no matter how to set the filter of time.

  Best regards

  Jones

  It seems that it is a duplicate to your message in this thread: is there a report that will show you how a user has used the secure area? . I will follow on this issue on the same thread.

• How to remove a discoverer report that has a status of running query

  Hello
  
  How to remove a discoverer report that has a status of running query
  
  Thank you

  Hi 925907,

  I think you would work with your DBA to kill the session associated with the workbook running.

  A query like this will provide your DBA with all the necessary information, it must:

  Select
  vs.*
  Of
  v$ session vs
  where
  vs. Program like 'dis51ws@% ';

  After the session was killed, it is a deletion of standard workbook (select file > open workbooks, and then right click on the name of the workbook, and then select delete).

  Patrick

• How to make a backup of the reports that has been created/generated on the grid

  Version grid = 10g
  Database version = 11g
  
  Reports was created inside the grid (report tablespace_usage), is there a way to do that effectively save? Now, I do it manually, by selecting each report and then saving them as a word document. I still have 200 reports to go. Any help would be appreciated.
  
  Concerning
  Dexter

  One possibility is to simply add another email address to the list of recipients for reports that goes to a read-only shared mailbox or a mail deposit box and leave the backup on the e-mail server to take care of it.

• Buggy BIOS reporting wrong OS RAM - whatever works for the normal case... Should I buy a DELL next time?

  I know that this thread needs by Dell support, or maybe I'll get the standard answer E310 motherboard supports only 2 GB (official number).   But I hope that there are other materials here lovers like me, who have found a solution to this problem...

  Are there any success stories of the E310 Bios reports 4 GB (all) OS kernel?  I'm under A03 version BIOS because according to Dell documentation, A04 upgrade will make me only ability to run more high speed CPU, no RAM upgrades.  What a bummer... When you upgrade CPU, one would expect that users will try RAM upgrade first, and where the team BIOS should have addressed this issue first before giving the possibility of upgrade processors! Here is my account of many hours spent on the research on the internet in detail:

  Resurrect an old Dell Dimension 3100 erasure of the Windows XP with Ubuntu (Xubuntu specifically, but it could have been Windows 64-bit as well - is not serious). Version of 64-bit installed Ubuntu LTS 14.04.3. This machine has a Hyper threading, 64-bit capable Pentium 4 chipset from Intel 915GV (who may be able to max 8 GB of RAM, according to Intel). Updated from existing to 1 GB of RAM Kingston with purchase of 2 sticks of 2 GB Samsung (same model). I tried all possible combinations of 3 all the sticks of memory, as well as tests them alone on this machine. 4 GB or 3 GB, depending on the combination of the sticks, in that I put the BIOS reports. All the sticks of memory are good, and they run the machine individually.

  The problem is that I see conflicting reports of some commands to command line and of applications such as "sysinfo" or "hardinfo". Newspapers of observed point syslog to 3.2 GB kernel is seen by kernel - not the whole 4 GB which is seen by the BIOS, or other command line tools. I'm suspecting that this BIOS is buggy and not all address space gives to the kernel. Here are links showing the conflicting reports:

  1. This is what kernel sees in syslog: http://paste.ubuntu.com/12404466/
  2. Command line indicating the presence of 4 GB: http://paste.ubuntu.com/12405884/
  3. Out of "hardinfo" application: http://paste.ubuntu.com/12405897/

  I am aware that this machine was initially sold to me with 2 GB RAM max as official data. But, after seeing internet reports of others who have made 4GB and research in data of intel 915GV chipset, I think of this maybe a buggy BIOS that does not give the final of 1 GB to the kernel.

  Hi Rdunnill,

  I was informed that the cause of the loss of RAM in BIOS is due to problem 'PCI-hole', which are present in older systems.  Essentially, a lot of memory RAM is simply lost and not used by the hardware, because of this problem and the OS will get to use only about 3. DBM for the moment, it is not yet clear to me if the space occupied by the device drivers is included in the / 3GB or excluded.  So far, I know at least the part of (if not all) video memory is NOT included in the figures presented by operating system.  Other dependants of pilot data maybe OS and I am not deeply knowledgeable about the Ubuntu/Debian OS which I am now running.  So the answer to your question above is that you will see on 1 GB loss once again, if you are upgrading to 8 GB - usable RAM would be about 7 GB.  Can be an overdose, considering the price of a new machine vs RAM these days.

  I read your response (during my research) in the en.community.dell.com/support-forums/desktop/f/3514/t/19306285 thread, which would lead others to believe that all 4 GB of usable RAM.  You can change this answer here.

  You run BIOS A04, but I have not upgraded to A03 because I see that the upgrade will do anything to the question of memory (but only gives superior CPU option, which I didn't need).   Upgrading from 2.8 to 3.4 GHz CPU BIOS would gain a little speed, but I do not run CPU intensive tasks on this machine.

• I think that the hard disk has been

  HP Pavilion Elite m9255.uk purchased in 2008 product number KT338AA - ABU SOFTWARE BUILD 82GBv3PrA3 AMD Phenom 9500 Quad nVidia MCP61 Chipset processor standard memory 4 GB DDR2 - SDRAM 4DIMM x Sockets 2 x 500 GB ST 350062 OAS model number scsi ST 3500620AS TSSTcorpCDDVDW TS-H653N videocard, NVIDIA GeForce 8600 GT Realtek High Def Audio Vista Home Premium build number 6001 Hauppauge WinTV 885 video Capture when reading this post please keep in mind that I'm getting on in years and I know very little about computers. I hope that I put enough information on my system to help to my request for help. The problem has been ongoing for some time, but has become more common, that it shows by the pc is crawling along at less than snail PACE, or freezing. In the upper part of the casing, inbetween card reader locations that a red light, then it started to blink, then she stays all the time. I tried to reinstall Vista a few months ago and everything was going well for a while, then it started and got worse, it took 10 hours to reinstall Vista on reformatted lecteurC and he hooked for hours on end scene I have disabled the power, he left all night and the next day I reformatted the C drive even once, he did finally install Vista, this time after about 4 hours, but it's always freezing etc. Have you tried sfc scannow result was without windows integrity violations I've run Seatools and he said that some areas were difficult to read I tried checkdisk, running for 14 hours always on 14% of Platinum 5 my gut feeling is that the C drive has had, no complaints because he did a lot of work. My thought is, as there are 2 hard drives that the second was not very useful, I could remove the current C drive and move the drive D and now in the C drive of slot and reinstall Vista there? My thoughts are that if I can do this and it works, then I could buy another drive to put in the D slot, do not want to waste money if it turns out not to hard dive. Of course, that would be much easier (in theory in my head who knows nothing) would just swap the drive letters. Now, when you're all finished rolling on the floor laughing hysterically (which I probably deserve), can someone offer me some ideas, suggestions, or help please? I would be very grateful, because I'm very close to throwing the pc out the window.

  Sorry for him was this post looks like, I use a little pathetic netbook, I have taken ages typing gently, but look at what happened to it... Sorry

  The cost factor, an appropriate player motivated this answer because of your VIsta operating system.

  You must copy the data files on the D drive to C drive.  Although RAID0 conforms to the standards of the AHCI, it is better to change to AHCI in the BIOS. See here that will allow a single hard drive. (The old D disk be reformatted and installation of the OS). In the end, you will need an adapter (like this one) to convert the old disk USB file copying, files of data back to the newly installed C drive.  Such an adpater can be found on Amazon.

  I would have been back sooner, but I'm distracted.

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• is - that the number of track Apple Watch of steps walked each day?  I looked under activity and do not see it.

  Is - that the number of track Apple Watch of steps walked each day?  Looked at the title of the activity, but it has not found.

  Hello Skramer37 and welcome to Apple Support communities. I have a Apple Watch (42mm Sport One series, shows OS 3). To answer your question, yes the Apple Watch keep track of your number of steps per day. We show, in the activity-> scroll down until you see 'Total Distance'-> above 'total Distance', it tells you the total number of steps that you took that day. I hope this helps!

• I think I received a text of scam, to say that my ID Apple has been locked and offering a link to fix the problem.  Has anyone received it?

  Today I got a text from a mobile phone no, informing me that my ID Apple has been locked.  I did not answer or clicking on the link sent in the message, because I suspect that it's maybe a scam.

  I was able to connect to Apple in order to send this message, which proves that the text is not authentic. I just want to warn others.

  Hello

  Clicking on the link, you have made the right choice.

  You can report the message to Apple by following the steps detailed here:

  Block the phone numbers and contacts or filter messages on iPhone, iPad, or iPod Touch - Apple Support

• Click recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... »

  I'm having a problem with Windows Media Center. It starts no problem, but when I click on recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... "If I click on TV guide there is no problem. I tried a restore, but for some reason any restore function has been disabled.

  (copy - paste from another thread - user has same question):

  
  You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
  Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
  FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
  Start Media Center, and then try again.  Fixed?

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]